{"file_path":"src/ApxUSD.sol","creation_status":"success","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity 0.8.30;\n\nimport {ERC20Upgradeable} from \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol\";\nimport {\n    ERC20PermitUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol\";\nimport {\n    ERC20PausableUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PausableUpgradeable.sol\";\nimport {\n    ERC20BurnableUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol\";\nimport {\n    AccessManagedUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/access/manager/AccessManagedUpgradeable.sol\";\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport {ERC20DenyListUpgradable} from \"./exts/ERC20DenyListUpgradable.sol\";\nimport {IAddressList} from \"./interfaces/IAddressList.sol\";\nimport {IGetCCIPAdmin} from \"@chainlink/contracts-ccip/interfaces/IGetCCIPAdmin.sol\";\nimport {ESupplyCapped} from \"./errors/SupplyCapped.sol\";\n\n/**\n * @title ApxUSD\n * @notice A stablecoin backed by off-chain preferred shares with dividend yields\n * @dev Implements ERC-20 with Permit (EIP-2612), pausability, deny listing, and role-based access control\n *\n * Features:\n * - Supply cap to limit total issuance\n * - MINT_STRAT for authorized minting contracts\n * - Pausable for emergency situations\n * - DenyList addresses for compliance\n * - UUPS upgradeable pattern\n */\ncontract ApxUSD is\n    Initializable,\n    ERC20Upgradeable,\n    ERC20PermitUpgradeable,\n    ERC20PausableUpgradeable,\n    ERC20DenyListUpgradable,\n    ERC20BurnableUpgradeable,\n    AccessManagedUpgradeable,\n    UUPSUpgradeable,\n    IGetCCIPAdmin,\n    ESupplyCapped\n{\n    /// @custom:storage-location erc7201:apyx.storage.ApxUSD\n    struct ApxUSDStorage {\n        /// @notice Maximum total supply allowed (in wei, 18 decimals)\n        uint256 supplyCap;\n        /// @notice Address authorised to register and configure the CCIP token pool.\n        /// @dev Returned by getCCIPAdmin() for Chainlink's ITokenAdminRegistry.\n        ///      Has no other special powers; rotate via setCCIPAdmin() (ADMIN_ROLE).\n        address ccipAdmin;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"apyx.storage.ApxUSD\")) - 1)) & ~bytes32(uint256(0xff))\n    // OR just storage-location ApxUSD\n    bytes32 private constant APXUSD_STORAGE_LOC = 0xd4bd5aaf4064e82ca5c0ebf6f76b7f421377722e7c3f989b53116d58938a1600;\n\n    function _getApxUSDStorage() private pure returns (ApxUSDStorage storage $) {\n        // slither-disable-next-line assembly\n        assembly {\n            $.slot := APXUSD_STORAGE_LOC\n        }\n    }\n\n    /// @notice Emitted when the supply cap is updated\n    event SupplyCapUpdated(uint256 oldCap, uint256 newCap);\n\n    // ----------------------------------------\n    // UUPSUpgradeable\n    // ----------------------------------------\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor() {\n        _disableInitializers();\n    }\n\n    /**\n     * @notice Initializes the ApxUSD contract\n     * @param initialAuthority Address of the AccessManager contract\n     * @param initialSupplyCap Maximum total supply (e.g., 1_000_000e18 for $1M)\n     */\n    function initialize(\n        string memory name,\n        string memory symbol,\n        address initialAuthority,\n        address initialDenyList,\n        uint256 initialSupplyCap\n    ) public initializer {\n        if (initialAuthority == address(0)) revert InvalidAddress(\"initialAuthority\");\n        if (initialDenyList == address(0)) revert InvalidAddress(\"initialDenyList\");\n        if (initialSupplyCap == 0) revert InvalidSupplyCap();\n\n        __ERC20_init(name, symbol);\n        __ERC20Permit_init(name);\n        __ERC20Pausable_init();\n        __ERC20DenyListedUpgradable_init(IAddressList(initialDenyList));\n        __AccessManaged_init(initialAuthority);\n\n        // Set initial supply cap\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n        $.supplyCap = initialSupplyCap;\n\n        emit SupplyCapUpdated(0, initialSupplyCap);\n    }\n\n    /**\n     * @notice Authorizes contract upgrades\n     * @dev Only callable through AccessManager\n     */\n    function _authorizeUpgrade(address newImplementation) internal override restricted {}\n\n    // ----------------------------------------\n    // ERC20Upgradeable\n    // ----------------------------------------\n\n    /**\n     * @notice Mints new apxUSD tokens\n     * @dev Only callable through AccessManager with MINT_STRAT_ROLE\n     * @param to Address to receive the minted tokens\n     * @param amount Amount of tokens to mint (in wei, 18 decimals)\n     * @param nonce Nonce for the mint\n     * @dev The nonce is not enforced in ApxUSD and is only included to ensure uniqueness\n     *      when scheduling operations with AccessManager. The nonce MUST be enforced by\n     *      a Minter contract (ie MinterV0).\n     */\n    function mint(address to, uint256 amount, uint256 nonce) external restricted {\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n\n        uint256 newTotalSupply = totalSupply() + amount;\n        if (newTotalSupply > $.supplyCap) {\n            revert SupplyCapExceeded(amount, $.supplyCap - totalSupply());\n        }\n\n        _mint(to, amount);\n    }\n\n    /**\n     * @notice Hook that is called before any token transfer\n     * @dev Enforces pause and freeze functionality\n     */\n    function _update(address from, address to, uint256 value)\n        internal\n        override(ERC20Upgradeable, ERC20PausableUpgradeable, ERC20DenyListUpgradable)\n    {\n        super._update(from, to, value);\n    }\n\n    // ----------------------------------------\n    // Supply Cap\n    // ----------------------------------------\n\n    /**\n     * @notice Updates the supply cap\n     * @dev Only callable through AccessManager with ADMIN_ROLE\n     * @param newSupplyCap New maximum total supply\n     */\n    function setSupplyCap(uint256 newSupplyCap) external restricted {\n        if (newSupplyCap < totalSupply()) {\n            revert InvalidSupplyCap();\n        }\n\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n        uint256 oldCap = $.supplyCap;\n        $.supplyCap = newSupplyCap;\n\n        emit SupplyCapUpdated(oldCap, newSupplyCap);\n    }\n\n    /**\n     * @notice Returns the current supply cap\n     * @return Maximum total supply allowed\n     */\n    function supplyCap() external view returns (uint256) {\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n        return $.supplyCap;\n    }\n\n    /**\n     * @notice Returns the remaining capacity before hitting the supply cap\n     * @return Amount of tokens that can still be minted\n     */\n    function supplyCapRemaining() external view returns (uint256) {\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n        uint256 supply = totalSupply();\n        return supply >= $.supplyCap ? 0 : $.supplyCap - supply;\n    }\n\n    // ----------------------------------------\n    // IGetCCIPAdmin\n    // ----------------------------------------\n\n    /// @notice Emitted when the CCIP admin address is updated\n    event CCIPAdminUpdated(address indexed oldAdmin, address indexed newAdmin);\n\n    /// @inheritdoc IGetCCIPAdmin\n    /// @notice Returns the address authorised to register the CCIP token pool for this token.\n    function getCCIPAdmin() external view returns (address) {\n        return _getApxUSDStorage().ccipAdmin;\n    }\n\n    /// @notice Sets a new CCIP admin address.\n    /// @dev Only callable through AccessManager with ADMIN_ROLE.\n    ///      Setting to address(0) effectively revokes the CCIP admin role.\n    /// @param newAdmin New CCIP admin address\n    function setCCIPAdmin(address newAdmin) external restricted {\n        ApxUSDStorage storage $ = _getApxUSDStorage();\n        address oldAdmin = $.ccipAdmin;\n        $.ccipAdmin = newAdmin;\n        emit CCIPAdminUpdated(oldAdmin, newAdmin);\n    }\n\n    // ----------------------------------------\n    // ERC20PausableUpgradeable\n    // ----------------------------------------\n\n    /**\n     * @notice Pauses all token transfers\n     * @dev Only callable through AccessManager with ADMIN_ROLE\n     */\n    function pause() external restricted {\n        _pause();\n    }\n\n    /**\n     * @notice Unpauses all token transfers\n     * @dev Only callable through AccessManager with ADMIN_ROLE\n     */\n    function unpause() external restricted {\n        _unpause();\n    }\n\n    // ----------------------------------------\n    // ERC20DenyListUpgradable\n    // ----------------------------------------\n\n    function setDenyList(IAddressList newDenyList) external restricted {\n        if (address(newDenyList) == address(0)) revert InvalidAddress(\"newDenyList\");\n        _setDenyList(newDenyList);\n    }\n}\n","deployed_bytecode":"0x6080604052600436106101e6575f3560e01c80637a9e5e4b11610108578063a8fa343c1161009d578063bf7e214f1161006d578063bf7e214f14610581578063c4c06bc114610595578063c9aba0aa146105a9578063d505accf146105c8578063dd62ed3e146105e7575f5ffd5b8063a8fa343c146104f4578063a9059cbb14610513578063ad3cb1cc14610532578063b6a3f59a14610562575f5ffd5b80638f770ad0116100d85780638f770ad0146104435780638fb36037146104635780638fd6a6ac1461049057806395d89b41146104e0575f5ffd5b80637a9e5e4b146103ca5780637ecebe00146103e95780638456cb591461040857806384b0196e1461041c575f5ffd5b80633f4ba83a1161017e57806353364e991161014e57806353364e99146103555780635c975abb1461036957806370a082311461038c57806379cc6790146103ab575f5ffd5b80633f4ba83a146102fb57806342966c681461030f5780634f1ef2861461032e57806352d1902d14610341575f5ffd5b806318160ddd116101b957806318160ddd1461028357806323b872dd146102ad578063313ce567146102cc5780633644e515146102e7575f5ffd5b806306fdde03146101ea578063095ea7b3146102145780630de2731d14610243578063156e29f614610264575b5f5ffd5b3480156101f5575f5ffd5b506101fe610606565b60405161020b919061203b565b60405180910390f35b34801561021f575f5ffd5b5061023361022e366004612061565b6106ab565b604051901515815260200161020b565b34801561024e575f5ffd5b5061026261025d36600461208b565b6106c4565b005b34801561026f575f5ffd5b5061026261027e3660046120a6565b610726565b34801561028e575f5ffd5b505f5160206126bc5f395f51905f52545b60405190815260200161020b565b3480156102b8575f5ffd5b506102336102c73660046120d8565b6107bf565b3480156102d7575f5ffd5b506040516012815260200161020b565b3480156102f2575f5ffd5b5061029f6107e2565b348015610306575f5ffd5b506102626107f0565b34801561031a575f5ffd5b50610262610329366004612116565b610803565b61026261033c3660046121b8565b61080d565b34801561034c575f5ffd5b5061029f61082c565b348015610360575f5ffd5b5061029f610847565b348015610374575f5ffd5b505f51602061273c5f395f51905f525460ff16610233565b348015610397575f5ffd5b5061029f6103a636600461208b565b610893565b3480156103b6575f5ffd5b506102626103c5366004612061565b6108c3565b3480156103d5575f5ffd5b506102626103e436600461208b565b6108d8565b3480156103f4575f5ffd5b5061029f61040336600461208b565b61095a565b348015610413575f5ffd5b50610262610964565b348015610427575f5ffd5b50610430610975565b60405161020b9796959493929190612218565b34801561044e575f5ffd5b505f51602061265c5f395f51905f525461029f565b34801561046e575f5ffd5b50610477610a1e565b6040516001600160e01b0319909116815260200161020b565b34801561049b575f5ffd5b507fd4bd5aaf4064e82ca5c0ebf6f76b7f421377722e7c3f989b53116d58938a1601546001600160a01b03165b6040516001600160a01b03909116815260200161020b565b3480156104eb575f5ffd5b506101fe610a54565b3480156104ff575f5ffd5b5061026261050e36600461208b565b610a92565b34801561051e575f5ffd5b5061023361052d366004612061565b610b1c565b34801561053d575f5ffd5b506101fe604051806040016040528060058152602001640352e302e360dc1b81525081565b34801561056d575f5ffd5b5061026261057c366004612116565b610b29565b34801561058c575f5ffd5b506104c8610bb4565b3480156105a0575f5ffd5b506104c8610bd5565b3480156105b4575f5ffd5b506102626105c33660046122cc565b610bea565b3480156105d3575f5ffd5b506102626105e236600461235c565b610e0b565b3480156105f2575f5ffd5b5061029f6106013660046123cd565b610f54565b60605f5f51602061269c5f395f51905f525b905080600301805461062990612404565b80601f016020809104026020016040519081016040528092919081815260200182805461065590612404565b80156106a05780601f10610677576101008083540402835291602001916106a0565b820191905f5260205f20905b81548152906001019060200180831161068357829003601f168201915b505050505091505090565b5f336106b8818585610f9d565b60019150505b92915050565b6106d0335b5f36610faf565b6001600160a01b03811661071a57604051630b0f5aa160e11b815260206004820152600b60248201526a1b995dd1195b9e531a5cdd60aa1b60448201526064015b60405180910390fd5b610723816110ad565b50565b61072f336106c9565b5f51602061265c5f395f51905f525f836107545f5160206126bc5f395f51905f525490565b61075e9190612450565b82549091508111156107ae57836107805f5160206126bc5f395f51905f525490565b835461078c9190612463565b604051634b344b1160e01b815260048101929092526024820152604401610711565b6107b8858561110a565b5050505050565b5f336107cc85828561113e565b6107d78585856111a2565b506001949350505050565b5f6107eb6111ff565b905090565b6107f9336106c9565b610801611208565b565b6107233382611267565b61081561129b565b61081e8261133f565b6108288282611348565b5050565b5f610835611404565b505f51602061271c5f395f51905f5290565b5f5f51602061265c5f395f51905f528161086c5f5160206126bc5f395f51905f525490565b825490915081101561088a578154610885908290612463565b61088c565b5f5b9250505090565b5f805f51602061269c5f395f51905f525b6001600160a01b039093165f9081526020939093525050604090205490565b6108ce82338361113e565b6108288282611267565b336108e1610bb4565b6001600160a01b0316816001600160a01b03161461091c5760405162d1953b60e31b81526001600160a01b0382166004820152602401610711565b816001600160a01b03163b5f03610951576040516361798f2f60e11b81526001600160a01b0383166004820152602401610711565b6108288261144d565b5f6106be826114ad565b61096d336106c9565b6108016114d5565b5f60608082808083815f5160206126fc5f395f51905f5280549091501580156109a057506001810154155b6109e45760405162461bcd60e51b81526020600482015260156024820152741152540dcc4c8e88155b9a5b9a5d1a585b1a5e9959605a1b6044820152606401610711565b6109ec61151d565b6109f461155b565b604080515f80825260208201909252600f60f81b9c939b5091995046985030975095509350915050565b5f51602061267c5f395f51905f5280545f9190600160a01b900460ff16610a45575f610a4e565b638fb3603760e01b5b91505090565b7f52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0480546060915f51602061269c5f395f51905f529161062990612404565b610a9b336106c9565b7fd4bd5aaf4064e82ca5c0ebf6f76b7f421377722e7c3f989b53116d58938a160180546001600160a01b031981166001600160a01b038481169182179093556040515f51602061265c5f395f51905f52939092169182907fe6aed30f8fcb01c95cfd4d0512b436882bb2d9005792b8d1b791bc7505614d21905f90a3505050565b5f336106b88185856111a2565b610b32336106c9565b5f5160206126bc5f395f51905f5254811015610b615760405163606bb6c960e11b815260040160405180910390fd5b5f51602061265c5f395f51905f528054828255604080518281526020810185905281517fb4d96b3a6638191d0f6aefa0fdc4d99af3592f4c97480e31feeb977723c63b53929181900390910190a1505050565b5f805f51602061267c5f395f51905f525b546001600160a01b031692915050565b5f805f5160206126dc5f395f51905f52610bc5565b5f610bf3611571565b805490915060ff600160401b820416159067ffffffffffffffff165f81158015610c1a5750825b90505f8267ffffffffffffffff166001148015610c365750303b155b905081158015610c44575080155b15610c625760405163f92ee8a960e01b815260040160405180910390fd5b845467ffffffffffffffff191660011785558315610c8c57845460ff60401b1916600160401b1785555b6001600160a01b038816610cd657604051630b0f5aa160e11b815260206004820152601060248201526f696e697469616c417574686f7269747960801b6044820152606401610711565b6001600160a01b038716610d1f57604051630b0f5aa160e11b815260206004820152600f60248201526e1a5b9a5d1a585b11195b9e531a5cdd608a1b6044820152606401610711565b855f03610d3f5760405163606bb6c960e11b815260040160405180910390fd5b610d498a8a611599565b610d528a6115ab565b610d5a6115d6565b610d63876115de565b610d6c8861165d565b5f51602061265c5f395f51905f52868155604080515f81526020810189905281517fb4d96b3a6638191d0f6aefa0fdc4d99af3592f4c97480e31feeb977723c63b53929181900390910190a1508315610dff57845460ff60401b19168555604051600181527fc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d29060200160405180910390a15b50505050505050505050565b83421115610e2f5760405163313c898160e11b815260048101859052602401610711565b5f7f6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9888888610e998c6001600160a01b03165f9081527f5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb006020526040902080546001810190915590565b6040805160208101969096526001600160a01b0394851690860152929091166060840152608083015260a082015260c0810186905260e0016040516020818303038152906040528051906020012090505f610ef38261166e565b90505f610f028287878761169a565b9050896001600160a01b0316816001600160a01b031614610f49576040516325c0072360e11b81526001600160a01b0380831660048301528b166024820152604401610711565b610dff8a8a8a610f9d565b6001600160a01b039182165f9081527f52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace016020908152604080832093909416825291909152205490565b610faa83838360016116c6565b505050565b5f51602061267c5f395f51905f525f80610fe7610fca610bb4565b8730610fd960045f8a8c612476565b610fe29161249d565b6117a9565b91509150816110a55763ffffffff81161561108257825460ff60a01b1916600160a01b178355611015610bb4565b6001600160a01b03166394c7d7ee8787876040518463ffffffff1660e01b8152600401611044939291906124d3565b5f604051808303815f87803b15801561105b575f5ffd5b505af115801561106d573d5f5f3e3d5ffd5b5050845460ff60a01b19168555506110a59050565b60405162d1953b60e31b81526001600160a01b0387166004820152602401610711565b505050505050565b5f5160206126dc5f395f51905f5280546001600160a01b031981166001600160a01b03848116918217845560405192169182907f3bef1e143087d517781ffa170d222e23d9e7512704132830f1c9a86fa0fd022f905f90a3505050565b6001600160a01b0382166111335760405163ec442f0560e01b81525f6004820152602401610711565b6108285f838361183b565b5f6111498484610f54565b90505f1981101561119c578181101561118e57604051637dc7a0d960e11b81526001600160a01b03841660048201526024810182905260448101839052606401610711565b61119c84848484035f6116c6565b50505050565b6001600160a01b0383166111cb57604051634b637e8f60e11b81525f6004820152602401610711565b6001600160a01b0382166111f45760405163ec442f0560e01b81525f6004820152602401610711565b610faa83838361183b565b5f6107eb611846565b6112106118b9565b5f51602061273c5f395f51905f52805460ff191681557f5db9ee0a495bf2e6ff9c91a7834c1ba4fdd244a5e8aa4e537bd38aeae4b073aa335b6040516001600160a01b03909116815260200160405180910390a150565b6001600160a01b03821661129057604051634b637e8f60e11b81525f6004820152602401610711565b610828825f8361183b565b306001600160a01b037f000000000000000000000000dd71fd677fde2ed2579a3c45204f41a11016ccb416148061132157507f000000000000000000000000dd71fd677fde2ed2579a3c45204f41a11016ccb46001600160a01b03166113155f51602061271c5f395f51905f52546001600160a01b031690565b6001600160a01b031614155b156108015760405163703e46dd60e11b815260040160405180910390fd5b610723336106c9565b816001600160a01b03166352d1902d6040518163ffffffff1660e01b8152600401602060405180830381865afa9250505080156113a2575060408051601f3d908101601f1916820190925261139f91810190612512565b60015b6113ca57604051634c9c8ce360e01b81526001600160a01b0383166004820152602401610711565b5f51602061271c5f395f51905f5281146113fa57604051632a87526960e21b815260048101829052602401610711565b610faa83836118e8565b306001600160a01b037f000000000000000000000000dd71fd677fde2ed2579a3c45204f41a11016ccb416146108015760405163703e46dd60e11b815260040160405180910390fd5b5f51602061267c5f395f51905f5280546001600160a01b0383166001600160a01b03199091168117825560408051918252517f2f658b440c35314f52658ea8a740e05b284cdc84dc9ae01e891f21b8933e7cad9181900360200190a15050565b5f807f5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb006108a4565b6114dd61193d565b5f51602061273c5f395f51905f52805460ff191660011781557f62e78cea01bee320cd4e420270b5ea74000d11b0c9f74754ebdbfc544b05a25833611249565b7fa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d10280546060915f5160206126fc5f395f51905f529161062990612404565b60605f5f5160206126fc5f395f51905f52610618565b5f807ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a006106be565b6115a161196d565b6108288282611992565b6115b361196d565b61072381604051806040016040528060018152602001603160f81b8152506119e2565b61080161196d565b6115e661196d565b6001600160a01b03811661162f57604051630b0f5aa160e11b815260206004820152600f60248201526e1a5b9a5d1a585b11195b9e531a5cdd608a1b6044820152606401610711565b5f5160206126dc5f395f51905f5280546001600160a01b0319166001600160a01b0392909216919091179055565b61166561196d565b61072381611a41565b5f6106be61167a6111ff565b8360405161190160f01b8152600281019290925260228201526042902090565b5f5f5f5f6116aa88888888611a52565b9250925092506116ba8282611b1a565b50909695505050505050565b5f51602061269c5f395f51905f526001600160a01b0385166116fd5760405163e602df0560e01b81525f6004820152602401610711565b6001600160a01b03841661172657604051634a1406b160e11b81525f6004820152602401610711565b6001600160a01b038086165f908152600183016020908152604080832093881683529290522083905581156107b857836001600160a01b0316856001600160a01b03167f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9258560405161179a91815260200190565b60405180910390a35050505050565b6040516001600160a01b038085166024830152831660448201526001600160e01b0319821660648201525f908190819060840160408051601f19818403018152918152602080830180516001600160e01b031663b700961360e01b1781525f808052918290528351939450919290918a5afa15611831575f516020805191945081901c150291505b5094509492505050565b610faa838383611bd2565b5f7f8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f611870611bef565b611878611c57565b60408051602081019490945283019190915260608201524660808201523060a082015260c00160405160208183030381529060405280519060200120905090565b5f51602061273c5f395f51905f525460ff1661080157604051638dfc202b60e01b815260040160405180910390fd5b6118f182611c99565b6040516001600160a01b038316907fbc7cd75a20ee27fd9adebab32041f755214dbc6bffa90cc0225b39da2e5c2d3b905f90a280511561193557610faa8282611cfc565b610828611d9c565b5f51602061273c5f395f51905f525460ff16156108015760405163d93c066560e01b815260040160405180910390fd5b611975611dbb565b61080157604051631afcd79f60e31b815260040160405180910390fd5b61199a61196d565b5f51602061269c5f395f51905f527f52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace036119d3848261256d565b506004810161119c838261256d565b6119ea61196d565b5f5160206126fc5f395f51905f527fa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d102611a23848261256d565b5060038101611a32838261256d565b505f8082556001909101555050565b611a4961196d565b6107238161144d565b5f80807f7fffffffffffffffffffffffffffffff5d576e7357a4501ddfe92f46681b20a0841115611a8b57505f91506003905082611b10565b604080515f808252602082018084528a905260ff891692820192909252606081018790526080810186905260019060a0016020604051602081039080840390855afa158015611adc573d5f5f3e3d5ffd5b5050604051601f1901519150506001600160a01b038116611b0757505f925060019150829050611b10565b92505f91508190505b9450945094915050565b5f826003811115611b2d57611b2d612628565b03611b36575050565b6001826003811115611b4a57611b4a612628565b03611b685760405163f645eedf60e01b815260040160405180910390fd5b6002826003811115611b7c57611b7c612628565b03611b9d5760405163fce698f760e01b815260048101829052602401610711565b6003826003811115611bb157611bb1612628565b03610828576040516335e2f38360e21b815260048101829052602401610711565b611bdb83611dd4565b611be482611dd4565b610faa838383611e06565b5f5f5160206126fc5f395f51905f5281611c0761151d565b805190915015611c1f57805160209091012092915050565b81548015611c2e579392505050565b7fc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470935050505090565b5f5f5160206126fc5f395f51905f5281611c6f61155b565b805190915015611c8757805160209091012092915050565b60018201548015611c2e579392505050565b806001600160a01b03163b5f03611cce57604051634c9c8ce360e01b81526001600160a01b0382166004820152602401610711565b5f51602061271c5f395f51905f5280546001600160a01b0319166001600160a01b0392909216919091179055565b60605f611d098484611e19565b9050808015611d2a57505f3d1180611d2a57505f846001600160a01b03163b115b15611d3f57611d37611e2c565b9150506106be565b8015611d6957604051639996b31560e01b81526001600160a01b0385166004820152602401610711565b3d15611d7c57611d77611e45565b611d95565b60405163d6bda27560e01b815260040160405180910390fd5b5092915050565b34156108015760405163b398979f60e01b815260040160405180910390fd5b5f611dc4611571565b54600160401b900460ff16919050565b611ddd81611e50565b156107235760405163e7d05e2760e01b81526001600160a01b0382166004820152602401610711565b611e0e61193d565b610faa838383611ed4565b5f5f5f835160208501865af49392505050565b6040513d81523d5f602083013e3d602001810160405290565b6040513d5f823e3d81fd5b5f805f5160206126dc5f395f51905f528054604051630bb7c8fd60e31b81526001600160a01b038681166004830152929350911690635dbe47e890602401602060405180830381865afa158015611ea9573d5f5f3e3d5ffd5b505050506040513d601f19601f82011682018060405250810190611ecd919061263c565b9392505050565b5f51602061269c5f395f51905f526001600160a01b038416611f0e5781816002015f828254611f039190612450565b90915550611f7e9050565b6001600160a01b0384165f9081526020829052604090205482811015611f605760405163391434e360e21b81526001600160a01b03861660048201526024810182905260448101849052606401610711565b6001600160a01b0385165f9081526020839052604090209083900390555b6001600160a01b038316611f9c576002810180548390039055611fba565b6001600160a01b0383165f9081526020829052604090208054830190555b826001600160a01b0316846001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef84604051611fff91815260200190565b60405180910390a350505050565b5f81518084528060208401602086015e5f602082860101526020601f19601f83011685010191505092915050565b602081525f611ecd602083018461200d565b6001600160a01b0381168114610723575f5ffd5b5f5f60408385031215612072575f5ffd5b823561207d8161204d565b946020939093013593505050565b5f6020828403121561209b575f5ffd5b8135611ecd8161204d565b5f5f5f606084860312156120b8575f5ffd5b83356120c38161204d565b95602085013595506040909401359392505050565b5f5f5f606084860312156120ea575f5ffd5b83356120f58161204d565b925060208401356121058161204d565b929592945050506040919091013590565b5f60208284031215612126575f5ffd5b5035919050565b634e487b7160e01b5f52604160045260245ffd5b5f5f67ffffffffffffffff84111561215b5761215b61212d565b50604051601f19601f85018116603f0116810181811067ffffffffffffffff8211171561218a5761218a61212d565b6040528381529050808284018510156121a1575f5ffd5b838360208301375f60208583010152509392505050565b5f5f604083850312156121c9575f5ffd5b82356121d48161204d565b9150602083013567ffffffffffffffff8111156121ef575f5ffd5b8301601f810185136121ff575f5ffd5b61220e85823560208401612141565b9150509250929050565b60ff60f81b8816815260e060208201525f61223660e083018961200d565b8281036040840152612248818961200d565b606084018890526001600160a01b038716608085015260a0840186905283810360c0850152845180825260208087019350909101905f5b8181101561229d57835183526020938401939092019160010161227f565b50909b9a5050505050505050505050565b5f82601f8301126122bd575f5ffd5b611ecd83833560208501612141565b5f5f5f5f5f60a086880312156122e0575f5ffd5b853567ffffffffffffffff8111156122f6575f5ffd5b612302888289016122ae565b955050602086013567ffffffffffffffff81111561231e575f5ffd5b61232a888289016122ae565b945050604086013561233b8161204d565b9250606086013561234b8161204d565b949793965091946080013592915050565b5f5f5f5f5f5f5f60e0888a031215612372575f5ffd5b873561237d8161204d565b9650602088013561238d8161204d565b95506040880135945060608801359350608088013560ff811681146123b0575f5ffd5b9699959850939692959460a0840135945060c09093013592915050565b5f5f604083850312156123de575f5ffd5b82356123e98161204d565b915060208301356123f98161204d565b809150509250929050565b600181811c9082168061241857607f821691505b60208210810361243657634e487b7160e01b5f52602260045260245ffd5b50919050565b634e487b7160e01b5f52601160045260245ffd5b808201808211156106be576106be61243c565b818103818111156106be576106be61243c565b5f5f85851115612484575f5ffd5b83861115612490575f5ffd5b5050820193919092039150565b80356001600160e01b03198116906004841015611d95576001600160e01b031960049490940360031b84901b1690921692915050565b6001600160a01b03841681526040602082018190528101829052818360608301375f818301606090810191909152601f909201601f1916010192915050565b5f60208284031215612522575f5ffd5b5051919050565b601f821115610faa57805f5260205f20601f840160051c8101602085101561254e5750805b601f840160051c820191505b818110156107b8575f815560010161255a565b815167ffffffffffffffff8111156125875761258761212d565b61259b816125958454612404565b84612529565b6020601f8211600181146125cd575f83156125b65750848201515b5f19600385901b1c1916600184901b1784556107b8565b5f84815260208120601f198516915b828110156125fc57878501518255602094850194600190920191016125dc565b508482101561261957868401515f19600387901b60f8161c191681555b50505050600190811b01905550565b634e487b7160e01b5f52602160045260245ffd5b5f6020828403121561264c575f5ffd5b81518015158114611ecd575f5ffdfed4bd5aaf4064e82ca5c0ebf6f76b7f421377722e7c3f989b53116d58938a1600f3177357ab46d8af007ab3fdb9af81da189e1068fefdc0073dca88a2cab40a0052c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0052c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace02de333b8ffad3aee9c87bb17db9ab84f10634c83b51f5022e3b2d7da89a012200a16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbccd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300a2646970667358221220616651f4b5664a9c4878afcb91e7c46cace07146b3df61435890baf7db587ff764736f6c634300081e0033","optimization_enabled":true,"verified_twin_address_hash":null,"is_verified":true,"compiler_settings":{"evmVersion":"prague","libraries":{},"metadata":{"bytecodeHash":"ipfs"},"optimizer":{"enabled":true,"runs":200},"remappings":[":@chainlink/contracts-ccip/=node_modules/@chainlink/contracts-ccip/contracts/",":@chainlink/contracts/call/=node_modules/@chainlink/contracts/src/v0.8/shared/call/",":@chainlink/contracts/src/=node_modules/@chainlink/contracts/src/",":@chainlink/local/=dependencies/chainlink-local-0.2.3/src/",":@openzeppelin-contracts-5.5.0/=dependencies/@openzeppelin-contracts-5.5.0/",":@openzeppelin-contracts-upgradeable-5.5.0/=dependencies/@openzeppelin-contracts-upgradeable-5.5.0/",":@openzeppelin/contracts-upgradeable/=dependencies/@openzeppelin-contracts-upgradeable-5.5.0/",":@openzeppelin/contracts/=dependencies/@openzeppelin-contracts-5.5.0/",":@openzeppelin/contracts@4.8.3/=node_modules/@openzeppelin/contracts-4.8.3/",":@openzeppelin/contracts@5.0.2/=node_modules/@openzeppelin/contracts-5.0.2/",":chainlink-local-0.2.3/=dependencies/chainlink-local-0.2.3/",":forge-std-1.11.0/=dependencies/forge-std-1.11.0/src/",":forge-std/=dependencies/forge-std-1.11.0/",":solady-0.1.26/=dependencies/solady-0.1.26/src/",":solady/=dependencies/solady-0.1.26/"]},"optimization_runs":200,"sourcify_repo_url":"https://repo.sourcify.dev/contracts/full_match/1/0xDd71Fd677fDe2eD2579A3C45204f41a11016ccB4/","decoded_constructor_args":null,"compiler_version":"0.8.30+commit.73712a01","is_verified_via_verifier_alliance":false,"verified_at":"2026-03-30T19:51:24.558753Z","implementations":[],"proxy_type":null,"external_libraries":[],"creation_bytecode":"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","name":"ApxUSD","is_blueprint":false,"license_type":"none","is_fully_verified":true,"is_verified_via_eth_bytecode_db":true,"language":"solidity","evm_version":"prague","can_be_visualized_via_sol2uml":true,"is_verified_via_sourcify":true,"additional_sources":[{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/proxy/beacon/IBeacon.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (proxy/beacon/IBeacon.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {UpgradeableBeacon} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/Errors.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of common custom errors used in multiple contracts\n *\n * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.\n * It is recommended to avoid relying on the error API for critical functionality.\n *\n * _Available since v5.1._\n */\nlibrary Errors {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error InsufficientBalance(uint256 balance, uint256 needed);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedCall();\n\n    /**\n     * @dev The deployment failed.\n     */\n    error FailedDeployment();\n\n    /**\n     * @dev A necessary precompile is missing.\n     */\n    error MissingPrecompile(address);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/proxy/utils/UUPSUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.22;\n\nimport {IERC1822Proxiable} from \"../../interfaces/draft-IERC1822.sol\";\nimport {ERC1967Utils} from \"../ERC1967/ERC1967Utils.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n *\n * @custom:stateless\n */\nabstract contract UUPSUpgradeable is IERC1822Proxiable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address private immutable __self = address(this);\n\n    /**\n     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`\n     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,\n     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.\n     * If the getter returns `\"5.0.0\"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must\n     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function\n     * during an upgrade.\n     */\n    string public constant UPGRADE_INTERFACE_VERSION = \"5.0.0\";\n\n    /**\n     * @dev The call is from an unauthorized context.\n     */\n    error UUPSUnauthorizedCallContext();\n\n    /**\n     * @dev The storage `slot` is unsupported as a UUID.\n     */\n    error UUPSUnsupportedProxiableUUID(bytes32 slot);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        _checkProxy();\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        _checkNotDelegated();\n        _;\n    }\n\n    /**\n     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view notDelegated returns (bytes32) {\n        return ERC1967Utils.IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data);\n    }\n\n    /**\n     * @dev Reverts if the execution is not performed via delegatecall or the execution\n     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.\n     */\n    function _checkProxy() internal view virtual {\n        if (\n            address(this) == __self || // Must be called through delegatecall\n            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy\n        ) {\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Reverts if the execution is performed via delegatecall.\n     * See {notDelegated}.\n     */\n    function _checkNotDelegated() internal view virtual {\n        if (address(this) != __self) {\n            // Must not be called through delegatecall\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.\n     *\n     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value\n     * is expected to be the implementation slot in ERC-1967.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {\n        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {\n                revert UUPSUnsupportedProxiableUUID(slot);\n            }\n            ERC1967Utils.upgradeToAndCall(newImplementation, data);\n        } catch {\n            // The implementation is not UUPS\n            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/utils/cryptography/EIP712Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/EIP712.sol)\n\npragma solidity ^0.8.24;\n\nimport {MessageHashUtils} from \"@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol\";\nimport {IERC5267} from \"@openzeppelin/contracts/interfaces/IERC5267.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose\n * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract\n * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to\n * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * NOTE: The upgradeable version of this contract does not use an immutable cache and recomputes the domain separator\n * each time {_domainSeparatorV4} is called. That is cheaper than accessing a cached version in cold storage.\n */\nabstract contract EIP712Upgradeable is Initializable, IERC5267 {\n    bytes32 private constant TYPE_HASH =\n        keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\");\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712\n    struct EIP712Storage {\n        /// @custom:oz-renamed-from _HASHED_NAME\n        bytes32 _hashedName;\n        /// @custom:oz-renamed-from _HASHED_VERSION\n        bytes32 _hashedVersion;\n\n        string _name;\n        string _version;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.EIP712\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;\n\n    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {\n        assembly {\n            $.slot := EIP712StorageLocation\n        }\n    }\n\n    /**\n     * @dev Initializes the domain separator and parameter caches.\n     *\n     * The meaning of `name` and `version` is specified in\n     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:\n     *\n     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n     * - `version`: the current major version of the signing domain.\n     *\n     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n     * contract upgrade].\n     */\n    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {\n        __EIP712_init_unchained(name, version);\n    }\n\n    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {\n        EIP712Storage storage $ = _getEIP712Storage();\n        $._name = name;\n        $._version = version;\n\n        // Reset prior values in storage if upgrading\n        $._hashedName = 0;\n        $._hashedVersion = 0;\n    }\n\n    /**\n     * @dev Returns the domain separator for the current chain.\n     */\n    function _domainSeparatorV4() internal view returns (bytes32) {\n        return _buildDomainSeparator();\n    }\n\n    function _buildDomainSeparator() private view returns (bytes32) {\n        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));\n    }\n\n    /**\n     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n     * function returns the hash of the fully encoded EIP712 message for this domain.\n     *\n     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n     *\n     * ```solidity\n     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n     *     keccak256(\"Mail(address to,string contents)\"),\n     *     mailTo,\n     *     keccak256(bytes(mailContents))\n     * )));\n     * address signer = ECDSA.recover(digest, signature);\n     * ```\n     */\n    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);\n    }\n\n    /// @inheritdoc IERC5267\n    function eip712Domain()\n        public\n        view\n        virtual\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        )\n    {\n        EIP712Storage storage $ = _getEIP712Storage();\n        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized\n        // and the EIP712 domain is not reliable, as it will be missing name and version.\n        require($._hashedName == 0 && $._hashedVersion == 0, \"EIP712: Uninitialized\");\n\n        return (\n            hex\"0f\", // 01111\n            _EIP712Name(),\n            _EIP712Version(),\n            block.chainid,\n            address(this),\n            bytes32(0),\n            new uint256[](0)\n        );\n    }\n\n    /**\n     * @dev The name parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Name() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev The version parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Version() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._version;\n    }\n\n    /**\n     * @dev The hash of the name parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.\n     */\n    function _EIP712NameHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory name = _EIP712Name();\n        if (bytes(name).length > 0) {\n            return keccak256(bytes(name));\n        } else {\n            // If the name is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.\n            bytes32 hashedName = $._hashedName;\n            if (hashedName != 0) {\n                return hashedName;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n\n    /**\n     * @dev The hash of the version parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.\n     */\n    function _EIP712VersionHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory version = _EIP712Version();\n        if (bytes(version).length > 0) {\n            return keccak256(bytes(version));\n        } else {\n            // If the version is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.\n            bytes32 hashedVersion = $._hashedVersion;\n            if (hashedVersion != 0) {\n                return hashedVersion;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/access/manager/IAccessManager.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (access/manager/IAccessManager.sol)\n\npragma solidity >=0.8.4;\n\ninterface IAccessManager {\n    /**\n     * @dev A delayed operation was scheduled.\n     */\n    event OperationScheduled(\n        bytes32 indexed operationId,\n        uint32 indexed nonce,\n        uint48 schedule,\n        address caller,\n        address target,\n        bytes data\n    );\n\n    /**\n     * @dev A scheduled operation was executed.\n     */\n    event OperationExecuted(bytes32 indexed operationId, uint32 indexed nonce);\n\n    /**\n     * @dev A scheduled operation was canceled.\n     */\n    event OperationCanceled(bytes32 indexed operationId, uint32 indexed nonce);\n\n    /**\n     * @dev Informational labelling for a roleId.\n     */\n    event RoleLabel(uint64 indexed roleId, string label);\n\n    /**\n     * @dev Emitted when `account` is granted `roleId`.\n     *\n     * NOTE: The meaning of the `since` argument depends on the `newMember` argument.\n     * If the role is granted to a new member, the `since` argument indicates when the account becomes a member of the role,\n     * otherwise it indicates the execution delay for this account and roleId is updated.\n     */\n    event RoleGranted(uint64 indexed roleId, address indexed account, uint32 delay, uint48 since, bool newMember);\n\n    /**\n     * @dev Emitted when `account` membership or `roleId` is revoked. Unlike granting, revoking is instantaneous.\n     */\n    event RoleRevoked(uint64 indexed roleId, address indexed account);\n\n    /**\n     * @dev Role acting as admin over a given `roleId` is updated.\n     */\n    event RoleAdminChanged(uint64 indexed roleId, uint64 indexed admin);\n\n    /**\n     * @dev Role acting as guardian over a given `roleId` is updated.\n     */\n    event RoleGuardianChanged(uint64 indexed roleId, uint64 indexed guardian);\n\n    /**\n     * @dev Grant delay for a given `roleId` will be updated to `delay` when `since` is reached.\n     */\n    event RoleGrantDelayChanged(uint64 indexed roleId, uint32 delay, uint48 since);\n\n    /**\n     * @dev Target mode is updated (true = closed, false = open).\n     */\n    event TargetClosed(address indexed target, bool closed);\n\n    /**\n     * @dev Role required to invoke `selector` on `target` is updated to `roleId`.\n     */\n    event TargetFunctionRoleUpdated(address indexed target, bytes4 selector, uint64 indexed roleId);\n\n    /**\n     * @dev Admin delay for a given `target` will be updated to `delay` when `since` is reached.\n     */\n    event TargetAdminDelayUpdated(address indexed target, uint32 delay, uint48 since);\n\n    error AccessManagerAlreadyScheduled(bytes32 operationId);\n    error AccessManagerNotScheduled(bytes32 operationId);\n    error AccessManagerNotReady(bytes32 operationId);\n    error AccessManagerExpired(bytes32 operationId);\n    error AccessManagerLockedRole(uint64 roleId);\n    error AccessManagerBadConfirmation();\n    error AccessManagerUnauthorizedAccount(address msgsender, uint64 roleId);\n    error AccessManagerUnauthorizedCall(address caller, address target, bytes4 selector);\n    error AccessManagerUnauthorizedConsume(address target);\n    error AccessManagerUnauthorizedCancel(address msgsender, address caller, address target, bytes4 selector);\n    error AccessManagerInvalidInitialAdmin(address initialAdmin);\n\n    /**\n     * @dev Check if an address (`caller`) is authorised to call a given function on a given contract directly (with\n     * no restriction). Additionally, it returns the delay needed to perform the call indirectly through the {schedule}\n     * & {execute} workflow.\n     *\n     * This function is usually called by the targeted contract to control immediate execution of restricted functions.\n     * Therefore we only return true if the call can be performed without any delay. If the call is subject to a\n     * previously set delay (not zero), then the function should return false and the caller should schedule the operation\n     * for future execution.\n     *\n     * If `allowed` is true, the delay can be disregarded and the operation can be immediately executed, otherwise\n     * the operation can be executed if and only if delay is greater than 0.\n     *\n     * NOTE: The IAuthority interface does not include the `uint32` delay. This is an extension of that interface that\n     * is backward compatible. Some contracts may thus ignore the second return argument. In that case they will fail\n     * to identify the indirect workflow, and will consider calls that require a delay to be forbidden.\n     *\n     * NOTE: This function does not report the permissions of the admin functions in the manager itself. These are defined by the\n     * {AccessManager} documentation.\n     */\n    function canCall(\n        address caller,\n        address target,\n        bytes4 selector\n    ) external view returns (bool allowed, uint32 delay);\n\n    /**\n     * @dev Expiration delay for scheduled proposals. Defaults to 1 week.\n     *\n     * IMPORTANT: Avoid overriding the expiration with 0. Otherwise every contract proposal will be expired immediately,\n     * disabling any scheduling usage.\n     */\n    function expiration() external view returns (uint32);\n\n    /**\n     * @dev Minimum setback for all delay updates, with the exception of execution delays. It\n     * can be increased without setback (and reset via {revokeRole} in the event of an\n     * accidental increase). Defaults to 5 days.\n     */\n    function minSetback() external view returns (uint32);\n\n    /**\n     * @dev Get whether the contract is closed disabling any access. Otherwise role permissions are applied.\n     *\n     * NOTE: When the manager itself is closed, admin functions are still accessible to avoid locking the contract.\n     */\n    function isTargetClosed(address target) external view returns (bool);\n\n    /**\n     * @dev Get the role required to call a function.\n     */\n    function getTargetFunctionRole(address target, bytes4 selector) external view returns (uint64);\n\n    /**\n     * @dev Get the admin delay for a target contract. Changes to contract configuration are subject to this delay.\n     */\n    function getTargetAdminDelay(address target) external view returns (uint32);\n\n    /**\n     * @dev Get the id of the role that acts as an admin for the given role.\n     *\n     * The admin permission is required to grant the role, revoke the role and update the execution delay to execute\n     * an operation that is restricted to this role.\n     */\n    function getRoleAdmin(uint64 roleId) external view returns (uint64);\n\n    /**\n     * @dev Get the role that acts as a guardian for a given role.\n     *\n     * The guardian permission allows canceling operations that have been scheduled under the role.\n     */\n    function getRoleGuardian(uint64 roleId) external view returns (uint64);\n\n    /**\n     * @dev Get the role current grant delay.\n     *\n     * Its value may change at any point without an event emitted following a call to {setGrantDelay}.\n     * Changes to this value, including effect timepoint are notified in advance by the {RoleGrantDelayChanged} event.\n     */\n    function getRoleGrantDelay(uint64 roleId) external view returns (uint32);\n\n    /**\n     * @dev Get the access details for a given account for a given role. These details include the timepoint at which\n     * membership becomes active, and the delay applied to all operations by this user that requires this permission\n     * level.\n     *\n     * Returns:\n     * [0] Timestamp at which the account membership becomes valid. 0 means role is not granted.\n     * [1] Current execution delay for the account.\n     * [2] Pending execution delay for the account.\n     * [3] Timestamp at which the pending execution delay will become active. 0 means no delay update is scheduled.\n     */\n    function getAccess(\n        uint64 roleId,\n        address account\n    ) external view returns (uint48 since, uint32 currentDelay, uint32 pendingDelay, uint48 effect);\n\n    /**\n     * @dev Check if a given account currently has the permission level corresponding to a given role. Note that this\n     * permission might be associated with an execution delay. {getAccess} can provide more details.\n     */\n    function hasRole(uint64 roleId, address account) external view returns (bool isMember, uint32 executionDelay);\n\n    /**\n     * @dev Give a label to a role, for improved role discoverability by UIs.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {RoleLabel} event.\n     */\n    function labelRole(uint64 roleId, string calldata label) external;\n\n    /**\n     * @dev Add `account` to `roleId`, or change its execution delay.\n     *\n     * This gives the account the authorization to call any function that is restricted to this role. An optional\n     * execution delay (in seconds) can be set. If that delay is non 0, the user is required to schedule any operation\n     * that is restricted to members of this role. The user will only be able to execute the operation after the delay has\n     * passed, before it has expired. During this period, admin and guardians can cancel the operation (see {cancel}).\n     *\n     * If the account has already been granted this role, the execution delay will be updated. This update is not\n     * immediate and follows the delay rules. For example, if a user currently has a delay of 3 hours, and this is\n     * called to reduce that delay to 1 hour, the new delay will take some time to take effect, enforcing that any\n     * operation executed in the 3 hours that follows this update was indeed scheduled before this update.\n     *\n     * Requirements:\n     *\n     * - the caller must be an admin for the role (see {getRoleAdmin})\n     * - granted role must not be the `PUBLIC_ROLE`\n     *\n     * Emits a {RoleGranted} event.\n     */\n    function grantRole(uint64 roleId, address account, uint32 executionDelay) external;\n\n    /**\n     * @dev Remove an account from a role, with immediate effect. If the account does not have the role, this call has\n     * no effect.\n     *\n     * Requirements:\n     *\n     * - the caller must be an admin for the role (see {getRoleAdmin})\n     * - revoked role must not be the `PUBLIC_ROLE`\n     *\n     * Emits a {RoleRevoked} event if the account had the role.\n     */\n    function revokeRole(uint64 roleId, address account) external;\n\n    /**\n     * @dev Renounce role permissions for the calling account with immediate effect. If the sender is not in\n     * the role this call has no effect.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     *\n     * Emits a {RoleRevoked} event if the account had the role.\n     */\n    function renounceRole(uint64 roleId, address callerConfirmation) external;\n\n    /**\n     * @dev Change admin role for a given role.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {RoleAdminChanged} event\n     */\n    function setRoleAdmin(uint64 roleId, uint64 admin) external;\n\n    /**\n     * @dev Change guardian role for a given role.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {RoleGuardianChanged} event\n     */\n    function setRoleGuardian(uint64 roleId, uint64 guardian) external;\n\n    /**\n     * @dev Update the delay for granting a `roleId`.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {RoleGrantDelayChanged} event.\n     */\n    function setGrantDelay(uint64 roleId, uint32 newDelay) external;\n\n    /**\n     * @dev Set the role required to call functions identified by the `selectors` in the `target` contract.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {TargetFunctionRoleUpdated} event per selector.\n     */\n    function setTargetFunctionRole(address target, bytes4[] calldata selectors, uint64 roleId) external;\n\n    /**\n     * @dev Set the delay for changing the configuration of a given target contract.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {TargetAdminDelayUpdated} event.\n     */\n    function setTargetAdminDelay(address target, uint32 newDelay) external;\n\n    /**\n     * @dev Set the closed flag for a contract.\n     *\n     * Closing the manager itself won't disable access to admin methods to avoid locking the contract.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     *\n     * Emits a {TargetClosed} event.\n     */\n    function setTargetClosed(address target, bool closed) external;\n\n    /**\n     * @dev Return the timepoint at which a scheduled operation will be ready for execution. This returns 0 if the\n     * operation is not yet scheduled, has expired, was executed, or was canceled.\n     */\n    function getSchedule(bytes32 id) external view returns (uint48);\n\n    /**\n     * @dev Return the nonce for the latest scheduled operation with a given id. Returns 0 if the operation has never\n     * been scheduled.\n     */\n    function getNonce(bytes32 id) external view returns (uint32);\n\n    /**\n     * @dev Schedule a delayed operation for future execution, and return the operation identifier. It is possible to\n     * choose the timestamp at which the operation becomes executable as long as it satisfies the execution delays\n     * required for the caller. The special value zero will automatically set the earliest possible time.\n     *\n     * Returns the `operationId` that was scheduled. Since this value is a hash of the parameters, it can reoccur when\n     * the same parameters are used; if this is relevant, the returned `nonce` can be used to uniquely identify this\n     * scheduled operation from other occurrences of the same `operationId` in invocations of {execute} and {cancel}.\n     *\n     * Emits a {OperationScheduled} event.\n     *\n     * NOTE: It is not possible to concurrently schedule more than one operation with the same `target` and `data`. If\n     * this is necessary, a random byte can be appended to `data` to act as a salt that will be ignored by the target\n     * contract if it is using standard Solidity ABI encoding.\n     */\n    function schedule(\n        address target,\n        bytes calldata data,\n        uint48 when\n    ) external returns (bytes32 operationId, uint32 nonce);\n\n    /**\n     * @dev Execute a function that is delay restricted, provided it was properly scheduled beforehand, or the\n     * execution delay is 0.\n     *\n     * Returns the nonce that identifies the previously scheduled operation that is executed, or 0 if the\n     * operation wasn't previously scheduled (if the caller doesn't have an execution delay).\n     *\n     * Emits an {OperationExecuted} event only if the call was scheduled and delayed.\n     */\n    function execute(address target, bytes calldata data) external payable returns (uint32);\n\n    /**\n     * @dev Cancel a scheduled (delayed) operation. Returns the nonce that identifies the previously scheduled\n     * operation that is cancelled.\n     *\n     * Requirements:\n     *\n     * - the caller must be the proposer, a guardian of the targeted function, or a global admin\n     *\n     * Emits a {OperationCanceled} event.\n     */\n    function cancel(address caller, address target, bytes calldata data) external returns (uint32);\n\n    /**\n     * @dev Consume a scheduled operation targeting the caller. If such an operation exists, mark it as consumed\n     * (emit an {OperationExecuted} event and clean the state). Otherwise, throw an error.\n     *\n     * This is useful for contracts that want to enforce that calls targeting them were scheduled on the manager,\n     * with all the verifications that it implies.\n     *\n     * Emit a {OperationExecuted} event.\n     */\n    function consumeScheduledOp(address caller, bytes calldata data) external;\n\n    /**\n     * @dev Hashing function for delayed operations.\n     */\n    function hashOperation(address caller, address target, bytes calldata data) external view returns (bytes32);\n\n    /**\n     * @dev Changes the authority of a target managed by this manager instance.\n     *\n     * Requirements:\n     *\n     * - the caller must be a global admin\n     */\n    function updateAuthority(address target, address newAuthority) external;\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/proxy/utils/Initializable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Storage of the initializable contract.\n     *\n     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions\n     * when using with upgradeable contracts.\n     *\n     * @custom:storage-location erc7201:openzeppelin.storage.Initializable\n     */\n    struct InitializableStorage {\n        /**\n         * @dev Indicates that the contract has been initialized.\n         */\n        uint64 _initialized;\n        /**\n         * @dev Indicates that the contract is in the process of being initialized.\n         */\n        bool _initializing;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Initializable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;\n\n    /**\n     * @dev The contract is already initialized.\n     */\n    error InvalidInitialization();\n\n    /**\n     * @dev The contract is not initializing.\n     */\n    error NotInitializing();\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint64 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any\n     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in\n     * production.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        // Cache values to avoid duplicated sloads\n        bool isTopLevelCall = !$._initializing;\n        uint64 initialized = $._initialized;\n\n        // Allowed calls:\n        // - initialSetup: the contract is not in the initializing state and no previous version was\n        //                 initialized\n        // - construction: the contract is initialized at version 1 (no reinitialization) and the\n        //                 current contract is just being deployed\n        bool initialSetup = initialized == 0 && isTopLevelCall;\n        bool construction = initialized == 1 && address(this).code.length == 0;\n\n        if (!initialSetup && !construction) {\n            revert InvalidInitialization();\n        }\n        $._initialized = 1;\n        if (isTopLevelCall) {\n            $._initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            $._initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint64 version) {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing || $._initialized >= version) {\n            revert InvalidInitialization();\n        }\n        $._initialized = version;\n        $._initializing = true;\n        _;\n        $._initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        _checkInitializing();\n        _;\n    }\n\n    /**\n     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.\n     */\n    function _checkInitializing() internal view virtual {\n        if (!_isInitializing()) {\n            revert NotInitializing();\n        }\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing) {\n            revert InvalidInitialization();\n        }\n        if ($._initialized != type(uint64).max) {\n            $._initialized = type(uint64).max;\n            emit Initialized(type(uint64).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint64) {\n        return _getInitializableStorage()._initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _getInitializableStorage()._initializing;\n    }\n\n    /**\n     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.\n     *\n     * NOTE: Consider following the ERC-7201 formula to derive storage locations.\n     */\n    function _initializableStorageSlot() internal pure virtual returns (bytes32) {\n        return INITIALIZABLE_STORAGE;\n    }\n\n    /**\n     * @dev Returns a pointer to the storage namespace.\n     */\n    // solhint-disable-next-line var-name-mixedcase\n    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {\n        bytes32 slot = _initializableStorageSlot();\n        assembly {\n            $.slot := slot\n        }\n    }\n}\n"},{"file_path":"src/interfaces/IAddressList.sol","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity 0.8.30;\n\n/**\n * @title IAddressList\n * @notice Interface for central address list management in the Apyx protocol\n * @dev Provides a single source of truth for blocked/allowed addresses across all Apyx contracts\n */\ninterface IAddressList {\n    /**\n     * @notice Emitted when an address is added to the list\n     * @param user Address that was added\n     */\n    event Added(address indexed user);\n\n    /**\n     * @notice Emitted when an address is removed from the list\n     * @param user Address that was removed\n     */\n    event Removed(address indexed user);\n\n    /**\n     * @notice Adds an address to the list\n     * @param user Address to add\n     */\n    function add(address user) external;\n\n    /**\n     * @notice Removes an address from the list\n     * @param user Address to remove\n     */\n    function remove(address user) external;\n\n    /**\n     * @notice Checks if an address is in the list\n     * @param user Address to check\n     * @return True if address is in the list, false otherwise\n     */\n    function contains(address user) external view returns (bool);\n\n    /**\n     * @notice Returns the number of addresses in the list\n     * @return Number of addresses\n     */\n    function length() external view returns (uint256);\n\n    /**\n     * @notice Returns the address at the given index\n     * @param index Index of the address to retrieve\n     * @return Address at the given index\n     */\n    function at(uint256 index) external view returns (address);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/cryptography/ECDSA.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS\n    }\n\n    /**\n     * @dev The signature derives the `address(0)`.\n     */\n    error ECDSAInvalidSignature();\n\n    /**\n     * @dev The signature has an invalid length.\n     */\n    error ECDSAInvalidSignatureLength(uint256 length);\n\n    /**\n     * @dev The signature has an S value that is in the upper half order.\n     */\n    error ECDSAInvalidSignatureS(bytes32 s);\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not\n     * return address(0) without also returning an error description. Errors are documented using an enum (error type)\n     * and a bytes32 providing additional information about the error.\n     *\n     * If no error is returned, then the address can be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     *\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes memory signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            assembly (\"memory-safe\") {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Variant of {tryRecover} that takes a signature in calldata\n     */\n    function tryRecoverCalldata(\n        bytes32 hash,\n        bytes calldata signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, calldata slices would work here, but are\n            // significantly more expensive (length check) than using calldataload in assembly.\n            assembly (\"memory-safe\") {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Variant of {recover} that takes a signature in calldata\n     */\n    function recoverCalldata(bytes32 hash, bytes calldata signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecoverCalldata(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        unchecked {\n            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n            // We do not check for an overflow here since the shift operation results in 0 or 1.\n            uint8 v = uint8((uint256(vs) >> 255) + 27);\n            return tryRecover(hash, v, r, s);\n        }\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n     */\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function tryRecover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS, s);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature, bytes32(0));\n        }\n\n        return (signer, RecoverError.NoError, bytes32(0));\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Parse a signature into its `v`, `r` and `s` components. Supports 65-byte and 64-byte (ERC-2098)\n     * formats. Returns (0,0,0) for invalid signatures.\n     *\n     * For 64-byte signatures, `v` is automatically normalized to 27 or 28.\n     * For 65-byte signatures, `v` is returned as-is and MUST already be 27 or 28 for use with ecrecover.\n     *\n     * Consider validating the result before use, or use {tryRecover}/{recover} which perform full validation.\n     */\n    function parse(bytes memory signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch mload(signature)\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := mload(add(signature, 0x40))\n                r := mload(add(signature, 0x20))\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Variant of {parse} that takes a signature in calldata\n     */\n    function parseCalldata(bytes calldata signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch signature.length\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := calldataload(add(signature.offset, 0x20))\n                r := calldataload(signature.offset)\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.\n     */\n    function _throwError(RecoverError error, bytes32 errorArg) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert ECDSAInvalidSignature();\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert ECDSAInvalidSignatureLength(uint256(errorArg));\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert ECDSAInvalidSignatureS(errorArg);\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/token/ERC20/extensions/IERC20Permit.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also applies here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/Bytes.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Bytes.sol)\n\npragma solidity ^0.8.24;\n\nimport {Math} from \"./math/Math.sol\";\n\n/**\n * @dev Bytes operations.\n */\nlibrary Bytes {\n    /**\n     * @dev Forward search for `s` in `buffer`\n     * * If `s` is present in the buffer, returns the index of the first instance\n     * * If `s` is not present in the buffer, returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]\n     */\n    function indexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {\n        return indexOf(buffer, s, 0);\n    }\n\n    /**\n     * @dev Forward search for `s` in `buffer` starting at position `pos`\n     * * If `s` is present in the buffer (at or after `pos`), returns the index of the next instance\n     * * If `s` is not present in the buffer (at or after `pos`), returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]\n     */\n    function indexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {\n        uint256 length = buffer.length;\n        for (uint256 i = pos; i < length; ++i) {\n            if (bytes1(_unsafeReadBytesOffset(buffer, i)) == s) {\n                return i;\n            }\n        }\n        return type(uint256).max;\n    }\n\n    /**\n     * @dev Backward search for `s` in `buffer`\n     * * If `s` is present in the buffer, returns the index of the last instance\n     * * If `s` is not present in the buffer, returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]\n     */\n    function lastIndexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {\n        return lastIndexOf(buffer, s, type(uint256).max);\n    }\n\n    /**\n     * @dev Backward search for `s` in `buffer` starting at position `pos`\n     * * If `s` is present in the buffer (at or before `pos`), returns the index of the previous instance\n     * * If `s` is not present in the buffer (at or before `pos`), returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]\n     */\n    function lastIndexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {\n        unchecked {\n            uint256 length = buffer.length;\n            for (uint256 i = Math.min(Math.saturatingAdd(pos, 1), length); i > 0; --i) {\n                if (bytes1(_unsafeReadBytesOffset(buffer, i - 1)) == s) {\n                    return i - 1;\n                }\n            }\n            return type(uint256).max;\n        }\n    }\n\n    /**\n     * @dev Copies the content of `buffer`, from `start` (included) to the end of `buffer` into a new bytes object in\n     * memory.\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]\n     */\n    function slice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {\n        return slice(buffer, start, buffer.length);\n    }\n\n    /**\n     * @dev Copies the content of `buffer`, from `start` (included) to `end` (excluded) into a new bytes object in\n     * memory. The `end` argument is truncated to the length of the `buffer`.\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]\n     */\n    function slice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {\n        // sanitize\n        end = Math.min(end, buffer.length);\n        start = Math.min(start, end);\n\n        // allocate and copy\n        bytes memory result = new bytes(end - start);\n        assembly (\"memory-safe\") {\n            mcopy(add(result, 0x20), add(add(buffer, 0x20), start), sub(end, start))\n        }\n\n        return result;\n    }\n\n    /**\n     * @dev Moves the content of `buffer`, from `start` (included) to the end of `buffer` to the start of that buffer.\n     *\n     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]\n     */\n    function splice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {\n        return splice(buffer, start, buffer.length);\n    }\n\n    /**\n     * @dev Moves the content of `buffer`, from `start` (included) to end (excluded) to the start of that buffer. The\n     * `end` argument is truncated to the length of the `buffer`.\n     *\n     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]\n     */\n    function splice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {\n        // sanitize\n        end = Math.min(end, buffer.length);\n        start = Math.min(start, end);\n\n        // allocate and copy\n        assembly (\"memory-safe\") {\n            mcopy(add(buffer, 0x20), add(add(buffer, 0x20), start), sub(end, start))\n            mstore(buffer, sub(end, start))\n        }\n\n        return buffer;\n    }\n\n    /**\n     * @dev Concatenate an array of bytes into a single bytes object.\n     *\n     * For fixed bytes types, we recommend using the solidity built-in `bytes.concat` or (equivalent)\n     * `abi.encodePacked`.\n     *\n     * NOTE: this could be done in assembly with a single loop that expands starting at the FMP, but that would be\n     * significantly less readable. It might be worth benchmarking the savings of the full-assembly approach.\n     */\n    function concat(bytes[] memory buffers) internal pure returns (bytes memory) {\n        uint256 length = 0;\n        for (uint256 i = 0; i < buffers.length; ++i) {\n            length += buffers[i].length;\n        }\n\n        bytes memory result = new bytes(length);\n\n        uint256 offset = 0x20;\n        for (uint256 i = 0; i < buffers.length; ++i) {\n            bytes memory input = buffers[i];\n            assembly (\"memory-safe\") {\n                mcopy(add(result, offset), add(input, 0x20), mload(input))\n            }\n            unchecked {\n                offset += input.length;\n            }\n        }\n\n        return result;\n    }\n\n    /**\n     * @dev Returns true if the two byte buffers are equal.\n     */\n    function equal(bytes memory a, bytes memory b) internal pure returns (bool) {\n        return a.length == b.length && keccak256(a) == keccak256(b);\n    }\n\n    /**\n     * @dev Reverses the byte order of a bytes32 value, converting between little-endian and big-endian.\n     * Inspired by https://graphics.stanford.edu/~seander/bithacks.html#ReverseParallel[Reverse Parallel]\n     */\n    function reverseBytes32(bytes32 value) internal pure returns (bytes32) {\n        value = // swap bytes\n            ((value >> 8) & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) |\n            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) << 8);\n        value = // swap 2-byte long pairs\n            ((value >> 16) & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) |\n            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) << 16);\n        value = // swap 4-byte long pairs\n            ((value >> 32) & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) |\n            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) << 32);\n        value = // swap 8-byte long pairs\n            ((value >> 64) & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) |\n            ((value & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) << 64);\n        return (value >> 128) | (value << 128); // swap 16-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 128-bit values.\n    function reverseBytes16(bytes16 value) internal pure returns (bytes16) {\n        value = // swap bytes\n            ((value & 0xFF00FF00FF00FF00FF00FF00FF00FF00) >> 8) |\n            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF) << 8);\n        value = // swap 2-byte long pairs\n            ((value & 0xFFFF0000FFFF0000FFFF0000FFFF0000) >> 16) |\n            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF) << 16);\n        value = // swap 4-byte long pairs\n            ((value & 0xFFFFFFFF00000000FFFFFFFF00000000) >> 32) |\n            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF) << 32);\n        return (value >> 64) | (value << 64); // swap 8-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 64-bit values.\n    function reverseBytes8(bytes8 value) internal pure returns (bytes8) {\n        value = ((value & 0xFF00FF00FF00FF00) >> 8) | ((value & 0x00FF00FF00FF00FF) << 8); // swap bytes\n        value = ((value & 0xFFFF0000FFFF0000) >> 16) | ((value & 0x0000FFFF0000FFFF) << 16); // swap 2-byte long pairs\n        return (value >> 32) | (value << 32); // swap 4-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 32-bit values.\n    function reverseBytes4(bytes4 value) internal pure returns (bytes4) {\n        value = ((value & 0xFF00FF00) >> 8) | ((value & 0x00FF00FF) << 8); // swap bytes\n        return (value >> 16) | (value << 16); // swap 2-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 16-bit values.\n    function reverseBytes2(bytes2 value) internal pure returns (bytes2) {\n        return (value >> 8) | (value << 8);\n    }\n\n    /**\n     * @dev Counts the number of leading zero bits a bytes array. Returns `8 * buffer.length`\n     * if the buffer is all zeros.\n     */\n    function clz(bytes memory buffer) internal pure returns (uint256) {\n        for (uint256 i = 0; i < buffer.length; i += 0x20) {\n            bytes32 chunk = _unsafeReadBytesOffset(buffer, i);\n            if (chunk != bytes32(0)) {\n                return Math.min(8 * i + Math.clz(uint256(chunk)), 8 * buffer.length);\n            }\n        }\n        return 8 * buffer.length;\n    }\n\n    /**\n     * @dev Reads a bytes32 from a bytes array without bounds checking.\n     *\n     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the\n     * assembly block as such would prevent some optimizations.\n     */\n    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {\n        // This is not memory safe in the general case, but all calls to this private function are within bounds.\n        assembly (\"memory-safe\") {\n            value := mload(add(add(buffer, 0x20), offset))\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/token/ERC20/IERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/token/ERC20/extensions/ERC20PermitUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/extensions/ERC20Permit.sol)\n\npragma solidity ^0.8.24;\n\nimport {IERC20Permit} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol\";\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {ECDSA} from \"@openzeppelin/contracts/utils/cryptography/ECDSA.sol\";\nimport {EIP712Upgradeable} from \"../../../utils/cryptography/EIP712Upgradeable.sol\";\nimport {NoncesUpgradeable} from \"../../../utils/NoncesUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\nabstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {\n    bytes32 private constant PERMIT_TYPEHASH =\n        keccak256(\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\");\n\n    /**\n     * @dev Permit deadline has expired.\n     */\n    error ERC2612ExpiredSignature(uint256 deadline);\n\n    /**\n     * @dev Mismatched signature.\n     */\n    error ERC2612InvalidSigner(address signer, address owner);\n\n    /**\n     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `\"1\"`.\n     *\n     * It's a good idea to use the same `name` that is defined as the ERC-20 token name.\n     */\n    function __ERC20Permit_init(string memory name) internal onlyInitializing {\n        __EIP712_init_unchained(name, \"1\");\n    }\n\n    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}\n\n    /// @inheritdoc IERC20Permit\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) public virtual {\n        if (block.timestamp > deadline) {\n            revert ERC2612ExpiredSignature(deadline);\n        }\n\n        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\n\n        bytes32 hash = _hashTypedDataV4(structHash);\n\n        address signer = ECDSA.recover(hash, v, r, s);\n        if (signer != owner) {\n            revert ERC2612InvalidSigner(signer, owner);\n        }\n\n        _approve(owner, spender, value);\n    }\n\n    /// @inheritdoc IERC20Permit\n    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {\n        return super.nonces(owner);\n    }\n\n    /// @inheritdoc IERC20Permit\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32) {\n        return _domainSeparatorV4();\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/interfaces/draft-IERC1822.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/Panic.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Helper library for emitting standardized panic codes.\n *\n * ```solidity\n * contract Example {\n *      using Panic for uint256;\n *\n *      // Use any of the declared internal constants\n *      function foo() { Panic.GENERIC.panic(); }\n *\n *      // Alternatively\n *      function foo() { Panic.panic(Panic.GENERIC); }\n * }\n * ```\n *\n * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].\n *\n * _Available since v5.1._\n */\n// slither-disable-next-line unused-state\nlibrary Panic {\n    /// @dev generic / unspecified error\n    uint256 internal constant GENERIC = 0x00;\n    /// @dev used by the assert() builtin\n    uint256 internal constant ASSERT = 0x01;\n    /// @dev arithmetic underflow or overflow\n    uint256 internal constant UNDER_OVERFLOW = 0x11;\n    /// @dev division or modulo by zero\n    uint256 internal constant DIVISION_BY_ZERO = 0x12;\n    /// @dev enum conversion error\n    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;\n    /// @dev invalid encoding in storage\n    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;\n    /// @dev empty array pop\n    uint256 internal constant EMPTY_ARRAY_POP = 0x31;\n    /// @dev array out of bounds access\n    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;\n    /// @dev resource error (too large allocation or too large array)\n    uint256 internal constant RESOURCE_ERROR = 0x41;\n    /// @dev calling invalid internal function\n    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;\n\n    /// @dev Reverts with a panic code. Recommended to use with\n    /// the internal constants with predefined codes.\n    function panic(uint256 code) internal pure {\n        assembly (\"memory-safe\") {\n            mstore(0x00, 0x4e487b71)\n            mstore(0x20, code)\n            revert(0x1c, 0x24)\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/access/manager/AuthorityUtils.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (access/manager/AuthorityUtils.sol)\n\npragma solidity ^0.8.20;\n\nimport {IAuthority} from \"./IAuthority.sol\";\n\nlibrary AuthorityUtils {\n    /**\n     * @dev Since `AccessManager` implements an extended IAuthority interface, invoking `canCall` with backwards compatibility\n     * for the preexisting `IAuthority` interface requires special care to avoid reverting on insufficient return data.\n     * This helper function takes care of invoking `canCall` in a backwards compatible way without reverting.\n     */\n    function canCallWithDelay(\n        address authority,\n        address caller,\n        address target,\n        bytes4 selector\n    ) internal view returns (bool immediate, uint32 delay) {\n        bytes memory data = abi.encodeCall(IAuthority.canCall, (caller, target, selector));\n\n        assembly (\"memory-safe\") {\n            mstore(0x00, 0x00)\n            mstore(0x20, 0x00)\n\n            if staticcall(gas(), authority, add(data, 0x20), mload(data), 0x00, 0x40) {\n                immediate := mload(0x00)\n                delay := mload(0x20)\n\n                // If delay does not fit in a uint32, return 0 (no delay)\n                // equivalent to: if gt(delay, 0xFFFFFFFF) { delay := 0 }\n                delay := mul(delay, iszero(shr(32, delay)))\n            }\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/interfaces/IERC1967.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1967.sol)\n\npragma solidity >=0.4.11;\n\n/**\n * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.\n */\ninterface IERC1967 {\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/utils/NoncesUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)\npragma solidity ^0.8.20;\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides tracking nonces for addresses. Nonces will only increment.\n */\nabstract contract NoncesUpgradeable is Initializable {\n    /**\n     * @dev The nonce used for an `account` is not the expected current nonce.\n     */\n    error InvalidAccountNonce(address account, uint256 currentNonce);\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces\n    struct NoncesStorage {\n        mapping(address account => uint256) _nonces;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Nonces\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;\n\n    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {\n        assembly {\n            $.slot := NoncesStorageLocation\n        }\n    }\n\n    function __Nonces_init() internal onlyInitializing {\n    }\n\n    function __Nonces_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns the next unused nonce for an address.\n     */\n    function nonces(address owner) public view virtual returns (uint256) {\n        NoncesStorage storage $ = _getNoncesStorage();\n        return $._nonces[owner];\n    }\n\n    /**\n     * @dev Consumes a nonce.\n     *\n     * Returns the current value and increments nonce.\n     */\n    function _useNonce(address owner) internal virtual returns (uint256) {\n        NoncesStorage storage $ = _getNoncesStorage();\n        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be\n        // decremented or reset. This guarantees that the nonce never overflows.\n        unchecked {\n            // It is important to do x++ and not ++x here.\n            return $._nonces[owner]++;\n        }\n    }\n\n    /**\n     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.\n     */\n    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {\n        uint256 current = _useNonce(owner);\n        if (nonce != current) {\n            revert InvalidAccountNonce(owner, current);\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/utils/ContextUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/LowLevelCall.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/LowLevelCall.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library of low level call functions that implement different calling strategies to deal with the return data.\n *\n * WARNING: Using this library requires an advanced understanding of Solidity and how the EVM works. It is recommended\n * to use the {Address} library instead.\n */\nlibrary LowLevelCall {\n    /// @dev Performs a Solidity function call using a low level `call` and ignoring the return data.\n    function callNoReturn(address target, bytes memory data) internal returns (bool success) {\n        return callNoReturn(target, 0, data);\n    }\n\n    /// @dev Same as {callNoReturn}, but allows to specify the value to be sent in the call.\n    function callNoReturn(address target, uint256 value, bytes memory data) internal returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `call` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function callReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        return callReturn64Bytes(target, 0, data);\n    }\n\n    /// @dev Same as {callReturnBytes32Pair}, but allows to specify the value to be sent in the call.\n    function callReturn64Bytes(\n        address target,\n        uint256 value,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `staticcall` and ignoring the return data.\n    function staticcallNoReturn(address target, bytes memory data) internal view returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `staticcall` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function staticcallReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal view returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `delegatecall` and ignoring the return data.\n    function delegatecallNoReturn(address target, bytes memory data) internal returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `delegatecall` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function delegatecallReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Returns the size of the return data buffer.\n    function returnDataSize() internal pure returns (uint256 size) {\n        assembly (\"memory-safe\") {\n            size := returndatasize()\n        }\n    }\n\n    /// @dev Returns a buffer containing the return data from the last call.\n    function returnData() internal pure returns (bytes memory result) {\n        assembly (\"memory-safe\") {\n            result := mload(0x40)\n            mstore(result, returndatasize())\n            returndatacopy(add(result, 0x20), 0x00, returndatasize())\n            mstore(0x40, add(result, add(0x20, returndatasize())))\n        }\n    }\n\n    /// @dev Revert with the return data from the last call.\n    function bubbleRevert() internal pure {\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            returndatacopy(fmp, 0x00, returndatasize())\n            revert(fmp, returndatasize())\n        }\n    }\n\n    function bubbleRevert(bytes memory returndata) internal pure {\n        assembly (\"memory-safe\") {\n            revert(add(returndata, 0x20), mload(returndata))\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/token/ERC20/extensions/ERC20PausableUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/ERC20Pausable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {PausableUpgradeable} from \"../../../utils/PausableUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev ERC-20 token with pausable token transfers, minting and burning.\n *\n * Useful for scenarios such as preventing trades until the end of an evaluation\n * period, or having an emergency switch for freezing all token transfers in the\n * event of a large bug.\n *\n * IMPORTANT: This contract does not include public pause and unpause functions. In\n * addition to inheriting this contract, you must define both functions, invoking the\n * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate\n * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will\n * make the contract pause mechanism of the contract unreachable, and thus unusable.\n */\nabstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {\n    function __ERC20Pausable_init() internal onlyInitializing {\n    }\n\n    function __ERC20Pausable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev See {ERC20-_update}.\n     *\n     * Requirements:\n     *\n     * - the contract must not be paused.\n     */\n    function _update(address from, address to, uint256 value) internal virtual override whenNotPaused {\n        super._update(from, to, value);\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/access/manager/IAuthority.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/manager/IAuthority.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Standard interface for permissioning originally defined in Dappsys.\n */\ninterface IAuthority {\n    /**\n     * @dev Returns true if the caller can invoke on a target the function identified by a function selector.\n     */\n    function canCall(address caller, address target, bytes4 selector) external view returns (bool allowed);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/math/Math.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\nimport {Panic} from \"../Panic.sol\";\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Return the 512-bit addition of two uint256.\n     *\n     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.\n     */\n    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        assembly (\"memory-safe\") {\n            low := add(a, b)\n            high := lt(low, a)\n        }\n    }\n\n    /**\n     * @dev Return the 512-bit multiplication of two uint256.\n     *\n     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.\n     */\n    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use\n        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n        // variables such that product = high * 2²⁵⁶ + low.\n        assembly (\"memory-safe\") {\n            let mm := mulmod(a, b, not(0))\n            low := mul(a, b)\n            high := sub(sub(mm, low), lt(mm, low))\n        }\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a + b;\n            success = c >= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a - b;\n            success = c <= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a * b;\n            assembly (\"memory-safe\") {\n                // Only true when the multiplication doesn't overflow\n                // (c / a == b) || (a == 0)\n                success := or(eq(div(c, a), b), iszero(a))\n            }\n            // equivalent to: success ? c : 0\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `DIV` opcode returns zero when the denominator is 0.\n                result := div(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `MOD` opcode returns zero when the denominator is 0.\n                result := mod(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryAdd(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.\n     */\n    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {\n        (, uint256 result) = trySub(a, b);\n        return result;\n    }\n\n    /**\n     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryMul(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Branchless ternary evaluation for `condition ? a : b`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `condition ? a : b`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * SafeCast.toUint(condition));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n\n        // The following calculation ensures accurate ceiling division without overflow.\n        // Since a is non-zero, (a - 1) / b will not overflow.\n        // The largest possible result occurs when (a - 1) / b is type(uint256).max,\n        // but the largest value we can obtain is type(uint256).max - 1, which happens\n        // when a = type(uint256).max and b = 1.\n        unchecked {\n            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);\n        }\n    }\n\n    /**\n     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     *\n     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (high == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return low / denominator;\n            }\n\n            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.\n            if (denominator <= high) {\n                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [high low].\n            uint256 remainder;\n            assembly (\"memory-safe\") {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                high := sub(high, gt(remainder, low))\n                low := sub(low, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly (\"memory-safe\") {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [high low] by twos.\n                low := div(low, twos)\n\n                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from high into low.\n            low |= high * twos;\n\n            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such\n            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶\n            inverse *= 2 - denominator * inverse; // inverse mod 2³²\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is\n            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high\n            // is no longer required.\n            result = low * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);\n    }\n\n    /**\n     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n            if (high >= 1 << n) {\n                Panic.panic(Panic.UNDER_OVERFLOW);\n            }\n            return (high << (256 - n)) | (low >> n);\n        }\n    }\n\n    /**\n     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {\n        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);\n    }\n\n    /**\n     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.\n     *\n     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.\n     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.\n     *\n     * If the input value is not inversible, 0 is returned.\n     *\n     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the\n     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.\n     */\n    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {\n        unchecked {\n            if (n == 0) return 0;\n\n            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)\n            // Used to compute integers x and y such that: ax + ny = gcd(a, n).\n            // When the gcd is 1, then the inverse of a modulo n exists and it's x.\n            // ax + ny = 1\n            // ax = 1 + (-y)n\n            // ax ≡ 1 (mod n) # x is the inverse of a modulo n\n\n            // If the remainder is 0 the gcd is n right away.\n            uint256 remainder = a % n;\n            uint256 gcd = n;\n\n            // Therefore the initial coefficients are:\n            // ax + ny = gcd(a, n) = n\n            // 0a + 1n = n\n            int256 x = 0;\n            int256 y = 1;\n\n            while (remainder != 0) {\n                uint256 quotient = gcd / remainder;\n\n                (gcd, remainder) = (\n                    // The old remainder is the next gcd to try.\n                    remainder,\n                    // Compute the next remainder.\n                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd\n                    // where gcd is at most n (capped to type(uint256).max)\n                    gcd - remainder * quotient\n                );\n\n                (x, y) = (\n                    // Increment the coefficient of a.\n                    y,\n                    // Decrement the coefficient of n.\n                    // Can overflow, but the result is casted to uint256 so that the\n                    // next value of y is \"wrapped around\" to a value between 0 and n - 1.\n                    x - y * int256(quotient)\n                );\n            }\n\n            if (gcd != 1) return 0; // No inverse exists.\n            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.\n        }\n    }\n\n    /**\n     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.\n     *\n     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is\n     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that\n     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.\n     *\n     * NOTE: this function does NOT check that `p` is a prime greater than `2`.\n     */\n    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {\n        unchecked {\n            return Math.modExp(a, p - 2, p);\n        }\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)\n     *\n     * Requirements:\n     * - modulus can't be zero\n     * - underlying staticcall to precompile must succeed\n     *\n     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make\n     * sure the chain you're using it on supports the precompiled contract for modular exponentiation\n     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,\n     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly\n     * interpreted as 0.\n     */\n    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {\n        (bool success, uint256 result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).\n     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying\n     * to operate modulo 0 or if the underlying precompile reverted.\n     *\n     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain\n     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in\n     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack\n     * of a revert, but the result may be incorrectly interpreted as 0.\n     */\n    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {\n        if (m == 0) return (false, 0);\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            // | Offset    | Content    | Content (Hex)                                                      |\n            // |-----------|------------|--------------------------------------------------------------------|\n            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x60:0x7f | value of b | 0x<.............................................................b> |\n            // | 0x80:0x9f | value of e | 0x<.............................................................e> |\n            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |\n            mstore(ptr, 0x20)\n            mstore(add(ptr, 0x20), 0x20)\n            mstore(add(ptr, 0x40), 0x20)\n            mstore(add(ptr, 0x60), b)\n            mstore(add(ptr, 0x80), e)\n            mstore(add(ptr, 0xa0), m)\n\n            // Given the result < m, it's guaranteed to fit in 32 bytes,\n            // so we can use the memory scratch space located at offset 0.\n            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)\n            result := mload(0x00)\n        }\n    }\n\n    /**\n     * @dev Variant of {modExp} that supports inputs of arbitrary length.\n     */\n    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {\n        (bool success, bytes memory result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.\n     */\n    function tryModExp(\n        bytes memory b,\n        bytes memory e,\n        bytes memory m\n    ) internal view returns (bool success, bytes memory result) {\n        if (_zeroBytes(m)) return (false, new bytes(0));\n\n        uint256 mLen = m.length;\n\n        // Encode call args in result and move the free memory pointer\n        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);\n\n        assembly (\"memory-safe\") {\n            let dataPtr := add(result, 0x20)\n            // Write result on top of args to avoid allocating extra memory.\n            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)\n            // Overwrite the length.\n            // result.length > returndatasize() is guaranteed because returndatasize() == m.length\n            mstore(result, mLen)\n            // Set the memory pointer after the returned data.\n            mstore(0x40, add(dataPtr, mLen))\n        }\n    }\n\n    /**\n     * @dev Returns whether the provided byte array is zero.\n     */\n    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {\n        for (uint256 i = 0; i < byteArray.length; ++i) {\n            if (byteArray[i] != 0) {\n                return false;\n            }\n        }\n        return true;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only\n     * using integer operations.\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        unchecked {\n            // Take care of easy edge cases when a == 0 or a == 1\n            if (a <= 1) {\n                return a;\n            }\n\n            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a\n            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between\n            // the current value as `ε_n = | x_n - sqrt(a) |`.\n            //\n            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root\n            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is\n            // bigger than any uint256.\n            //\n            // By noticing that\n            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`\n            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar\n            // to the msb function.\n            uint256 aa = a;\n            uint256 xn = 1;\n\n            if (aa >= (1 << 128)) {\n                aa >>= 128;\n                xn <<= 64;\n            }\n            if (aa >= (1 << 64)) {\n                aa >>= 64;\n                xn <<= 32;\n            }\n            if (aa >= (1 << 32)) {\n                aa >>= 32;\n                xn <<= 16;\n            }\n            if (aa >= (1 << 16)) {\n                aa >>= 16;\n                xn <<= 8;\n            }\n            if (aa >= (1 << 8)) {\n                aa >>= 8;\n                xn <<= 4;\n            }\n            if (aa >= (1 << 4)) {\n                aa >>= 4;\n                xn <<= 2;\n            }\n            if (aa >= (1 << 2)) {\n                xn <<= 1;\n            }\n\n            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).\n            //\n            // We can refine our estimation by noticing that the middle of that interval minimizes the error.\n            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).\n            // This is going to be our x_0 (and ε_0)\n            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)\n\n            // From here, Newton's method give us:\n            // x_{n+1} = (x_n + a / x_n) / 2\n            //\n            // One should note that:\n            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a\n            //              = ((x_n² + a) / (2 * x_n))² - a\n            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a\n            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)\n            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)\n            //              = (x_n² - a)² / (2 * x_n)²\n            //              = ((x_n² - a) / (2 * x_n))²\n            //              ≥ 0\n            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n\n            //\n            // This gives us the proof of quadratic convergence of the sequence:\n            // ε_{n+1} = | x_{n+1} - sqrt(a) |\n            //         = | (x_n + a / x_n) / 2 - sqrt(a) |\n            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |\n            //         = | (x_n - sqrt(a))² / (2 * x_n) |\n            //         = | ε_n² / (2 * x_n) |\n            //         = ε_n² / | (2 * x_n) |\n            //\n            // For the first iteration, we have a special case where x_0 is known:\n            // ε_1 = ε_0² / | (2 * x_0) |\n            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))\n            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))\n            //     ≤ 2**(e-3) / 3\n            //     ≤ 2**(e-3-log2(3))\n            //     ≤ 2**(e-4.5)\n            //\n            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:\n            // ε_{n+1} = ε_n² / | (2 * x_n) |\n            //         ≤ (2**(e-k))² / (2 * 2**(e-1))\n            //         ≤ 2**(2*e-2*k) / 2**e\n            //         ≤ 2**(e-2*k)\n            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above\n            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5\n            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9\n            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18\n            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36\n            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72\n\n            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision\n            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either\n            // sqrt(a) or sqrt(a) + 1.\n            return xn - SafeCast.toUint(xn > a / xn);\n        }\n    }\n\n    /**\n     * @dev Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // If upper 8 bits of 16-bit half set, add 8 to result\n        r |= SafeCast.toUint((x >> r) > 0xff) << 3;\n        // If upper 4 bits of 8-bit half set, add 4 to result\n        r |= SafeCast.toUint((x >> r) > 0xf) << 2;\n\n        // Shifts value right by the current result and use it as an index into this lookup table:\n        //\n        // | x (4 bits) |  index  | table[index] = MSB position |\n        // |------------|---------|-----------------------------|\n        // |    0000    |    0    |        table[0] = 0         |\n        // |    0001    |    1    |        table[1] = 0         |\n        // |    0010    |    2    |        table[2] = 1         |\n        // |    0011    |    3    |        table[3] = 1         |\n        // |    0100    |    4    |        table[4] = 2         |\n        // |    0101    |    5    |        table[5] = 2         |\n        // |    0110    |    6    |        table[6] = 2         |\n        // |    0111    |    7    |        table[7] = 2         |\n        // |    1000    |    8    |        table[8] = 3         |\n        // |    1001    |    9    |        table[9] = 3         |\n        // |    1010    |   10    |        table[10] = 3        |\n        // |    1011    |   11    |        table[11] = 3        |\n        // |    1100    |   12    |        table[12] = 3        |\n        // |    1101    |   13    |        table[13] = 3        |\n        // |    1110    |   14    |        table[14] = 3        |\n        // |    1111    |   15    |        table[15] = 3        |\n        //\n        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.\n        assembly (\"memory-safe\") {\n            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8\n        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n\n    /**\n     * @dev Counts the number of leading zero bits in a uint256.\n     */\n    function clz(uint256 x) internal pure returns (uint256) {\n        return ternary(x == 0, 256, 255 - log2(x));\n    }\n}\n"},{"file_path":"src/errors/Denied.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.30;\n\n/**\n * @title EDenied\n * @notice Interface for the Denied error\n */\ninterface EDenied {\n    /**\n     * @notice Error thrown when trying to deposit/receive shares while on deny list\n     * @param denied The address that was denied\n     */\n    error Denied(address denied);\n}\n\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/token/ERC20/extensions/ERC20BurnableUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {ContextUpgradeable} from \"../../../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Extension of {ERC20} that allows token holders to destroy both their own\n * tokens and those that they have an allowance for, in a way that can be\n * recognized off-chain (via event analysis).\n */\nabstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {\n    function __ERC20Burnable_init() internal onlyInitializing {\n    }\n\n    function __ERC20Burnable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Destroys a `value` amount of tokens from the caller.\n     *\n     * See {ERC20-_burn}.\n     */\n    function burn(uint256 value) public virtual {\n        _burn(_msgSender(), value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, deducting from\n     * the caller's allowance.\n     *\n     * See {ERC20-_burn} and {ERC20-allowance}.\n     *\n     * Requirements:\n     *\n     * - the caller must have allowance for ``accounts``'s tokens of at least\n     * `value`.\n     */\n    function burnFrom(address account, uint256 value) public virtual {\n        _spendAllowance(account, _msgSender(), value);\n        _burn(account, value);\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/interfaces/IERC5267.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC5267.sol)\n\npragma solidity >=0.4.16;\n\ninterface IERC5267 {\n    /**\n     * @dev MAY be emitted to signal that the domain could have changed.\n     */\n    event EIP712DomainChanged();\n\n    /**\n     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712\n     * signature.\n     */\n    function eip712Domain()\n        external\n        view\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        );\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/proxy/utils/Initializable.sol","source_code":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.20;\n\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/cryptography/MessageHashUtils.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/MessageHashUtils.sol)\n\npragma solidity ^0.8.24;\n\nimport {Strings} from \"../Strings.sol\";\n\n/**\n * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.\n *\n * The library provides methods for generating a hash of a message that conforms to the\n * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]\n * specifications.\n */\nlibrary MessageHashUtils {\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing a bytes32 `messageHash` with\n     * `\"\\x19Ethereum Signed Message:\\n32\"` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with\n     * keccak256, although any bytes32 value can be safely used because the final digest will\n     * be re-hashed.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, \"\\x19Ethereum Signed Message:\\n32\") // 32 is the bytes-length of messageHash\n            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix\n            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing an arbitrary `message` with\n     * `\"\\x19Ethereum Signed Message:\\n\" + len(message)` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {\n        return\n            keccak256(bytes.concat(\"\\x19Ethereum Signed Message:\\n\", bytes(Strings.toString(message.length)), message));\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x00` (data with intended validator).\n     *\n     * The digest is calculated by prefixing an arbitrary `data` with `\"\\x19\\x00\"` and the intended\n     * `validator` address. Then hashing the result.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(hex\"19_00\", validator, data));\n    }\n\n    /**\n     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.\n     */\n    function toDataWithIntendedValidatorHash(\n        address validator,\n        bytes32 messageHash\n    ) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, hex\"19_00\")\n            mstore(0x02, shl(96, validator))\n            mstore(0x16, messageHash)\n            digest := keccak256(0x00, 0x36)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).\n     *\n     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with\n     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            mstore(ptr, hex\"19_01\")\n            mstore(add(ptr, 0x02), domainSeparator)\n            mstore(add(ptr, 0x22), structHash)\n            digest := keccak256(ptr, 0x42)\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/math/SignedMath.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.20;\n\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // Formula from the \"Bit Twiddling Hacks\" by Sean Eron Anderson.\n            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,\n            // taking advantage of the most significant (or \"sign\" bit) in two's complement representation.\n            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,\n            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).\n            int256 mask = n >> 255;\n\n            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.\n            return uint256((n + mask) ^ mask);\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/proxy/utils/UUPSUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.22;\n\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts/proxy/utils/UUPSUpgradeable.sol\";\n"},{"file_path":"src/errors/SupplyCapped.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.30;\n\n/**\n * @title ESupplyCapped\n * @notice Interface for supply cap related errors\n */\ninterface ESupplyCapped {\n    /**\n     * @notice Error thrown when minting would exceed the supply cap\n     */\n    error SupplyCapExceeded(uint256 requestedAmount, uint256 availableCapacity);\n\n    /**\n     * @notice Error thrown when setting an invalid supply cap\n     */\n    error InvalidSupplyCap();\n}\n"},{"file_path":"src/exts/ERC20DenyListUpgradable.sol","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity 0.8.30;\n\nimport {ERC20Upgradeable} from \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\nimport {IAddressList} from \"../interfaces/IAddressList.sol\";\nimport {EInvalidAddress} from \"../errors/InvalidAddress.sol\";\nimport {EDenied} from \"../errors/Denied.sol\";\n\nabstract contract ERC20DenyListUpgradable is Initializable, ERC20Upgradeable, EInvalidAddress, EDenied {\n    /// @custom:storage-location erc7201:apyx.storage.DenyListed\n    struct DenyListStorage {\n        /// @notice Reference to the AddressList contract for deny list checking\n        IAddressList _denyList;\n    }\n\n    bytes32 private constant DENYLISTED_STORAGE_LOC =\n        0xde333b8ffad3aee9c87bb17db9ab84f10634c83b51f5022e3b2d7da89a012200;\n\n    function _getDenyListStorage() internal pure returns (DenyListStorage storage $) {\n        // slither-disable-next-line assembly\n        assembly {\n            $.slot := DENYLISTED_STORAGE_LOC\n        }\n    }\n\n    /**\n     * @notice Emitted when the deny list contract is updated\n     * @param oldDenyList Previous deny list contract address\n     * @param newDenyList New deny list contract address\n     */\n    event DenyListUpdated(address indexed oldDenyList, address indexed newDenyList);\n\n    function __ERC20DenyListedUpgradable_init(IAddressList initialDenyList) internal onlyInitializing {\n        if (address(initialDenyList) == address(0)) revert InvalidAddress(\"initialDenyList\");\n        DenyListStorage storage $ = _getDenyListStorage();\n        $._denyList = initialDenyList;\n    }\n\n    function _isDenied(address user) internal view returns (bool) {\n        DenyListStorage storage $ = _getDenyListStorage();\n        return $._denyList.contains(user);\n    }\n\n    function _revertIfDenied(address user) internal view {\n        if (_isDenied(user)) revert Denied(user);\n    }\n\n    modifier checkNotDenied(address user) {\n        _revertIfDenied(user);\n        _;\n    }\n\n    /**\n     * @dev Overrides the default ERC20 _update to enforce deny list checking\n     */\n    function _update(address from, address to, uint256 value) internal virtual override {\n        _revertIfDenied(from);\n        _revertIfDenied(to);\n        super._update(from, to, value);\n    }\n\n    function denyList() public view returns (IAddressList) {\n        DenyListStorage storage $ = _getDenyListStorage();\n        return $._denyList;\n    }\n\n    function _setDenyList(IAddressList newDenyList) internal {\n        DenyListStorage storage $ = _getDenyListStorage();\n        address oldDenyList = address($._denyList);\n        $._denyList = newDenyList;\n        emit DenyListUpdated(oldDenyList, address(newDenyList));\n    }\n}\n"},{"file_path":"src/errors/InvalidAddress.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.30;\n\n/**\n * @title EInvalidAddress\n * @notice Interface for the InvalidAddress error\n */\ninterface EInvalidAddress {\n    /**\n     * @notice Error thrown when a zero address is provided where it's not allowed\n     */\n    error InvalidAddress(string param);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/proxy/ERC1967/ERC1967Utils.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (proxy/ERC1967/ERC1967Utils.sol)\n\npragma solidity ^0.8.21;\n\nimport {IBeacon} from \"../beacon/IBeacon.sol\";\nimport {IERC1967} from \"../../interfaces/IERC1967.sol\";\nimport {Address} from \"../../utils/Address.sol\";\nimport {StorageSlot} from \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This library provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.\n */\nlibrary ERC1967Utils {\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev The `implementation` of the proxy is invalid.\n     */\n    error ERC1967InvalidImplementation(address implementation);\n\n    /**\n     * @dev The `admin` of the proxy is invalid.\n     */\n    error ERC1967InvalidAdmin(address admin);\n\n    /**\n     * @dev The `beacon` of the proxy is invalid.\n     */\n    error ERC1967InvalidBeacon(address beacon);\n\n    /**\n     * @dev An upgrade function sees `msg.value > 0` that may be lost.\n     */\n    error ERC1967NonPayable();\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        if (newImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(newImplementation);\n        }\n        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Performs implementation upgrade with additional setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) internal {\n        _setImplementation(newImplementation);\n        emit IERC1967.Upgraded(newImplementation);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(newImplementation, data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function getAdmin() internal view returns (address) {\n        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        if (newAdmin == address(0)) {\n            revert ERC1967InvalidAdmin(address(0));\n        }\n        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {IERC1967-AdminChanged} event.\n     */\n    function changeAdmin(address newAdmin) internal {\n        emit IERC1967.AdminChanged(getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is the keccak-256 hash of \"eip1967.proxy.beacon\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the ERC-1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        if (newBeacon.code.length == 0) {\n            revert ERC1967InvalidBeacon(newBeacon);\n        }\n\n        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;\n\n        address beaconImplementation = IBeacon(newBeacon).implementation();\n        if (beaconImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(beaconImplementation);\n        }\n    }\n\n    /**\n     * @dev Change the beacon and trigger a setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-BeaconUpgraded} event.\n     *\n     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since\n     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for\n     * efficiency.\n     */\n    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {\n        _setBeacon(newBeacon);\n        emit IERC1967.BeaconUpgraded(newBeacon);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract\n     * if an upgrade doesn't perform an initialization call.\n     */\n    function _checkNonPayable() private {\n        if (msg.value > 0) {\n            revert ERC1967NonPayable();\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/StorageSlot.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC-1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct Int256Slot {\n        int256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Int256Slot` with member `value` located at `slot`.\n     */\n    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/token/ERC20/ERC20Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {ContextUpgradeable} from \"../../utils/ContextUpgradeable.sol\";\nimport {IERC20Errors} from \"@openzeppelin/contracts/interfaces/draft-IERC6093.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {\n    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20\n    struct ERC20Storage {\n        mapping(address account => uint256) _balances;\n\n        mapping(address account => mapping(address spender => uint256)) _allowances;\n\n        uint256 _totalSupply;\n\n        string _name;\n        string _symbol;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC20\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;\n\n    function _getERC20Storage() private pure returns (ERC20Storage storage $) {\n        assembly {\n            $.slot := ERC20StorageLocation\n        }\n    }\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * Both values are immutable: they can only be set once during construction.\n     */\n    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {\n        __ERC20_init_unchained(name_, symbol_);\n    }\n\n    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n        ERC20Storage storage $ = _getERC20Storage();\n        $._name = name_;\n        $._symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the default value returned by this function, unless\n     * it's overridden.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /// @inheritdoc IERC20\n    function totalSupply() public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._totalSupply;\n    }\n\n    /// @inheritdoc IERC20\n    function balanceOf(address account) public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `value`.\n     */\n    function transfer(address to, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, value);\n        return true;\n    }\n\n    /// @inheritdoc IERC20\n    function allowance(address owner, address spender) public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Skips emitting an {Approval} event indicating an allowance update. This is not\n     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `value`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `value`.\n     */\n    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, value);\n        _transfer(from, to, value);\n        return true;\n    }\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _transfer(address from, address to, uint256 value) internal {\n        if (from == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        if (to == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(from, to, value);\n    }\n\n    /**\n     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n     * this function.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _update(address from, address to, uint256 value) internal virtual {\n        ERC20Storage storage $ = _getERC20Storage();\n        if (from == address(0)) {\n            // Overflow check required: The rest of the code assumes that totalSupply never overflows\n            $._totalSupply += value;\n        } else {\n            uint256 fromBalance = $._balances[from];\n            if (fromBalance < value) {\n                revert ERC20InsufficientBalance(from, fromBalance, value);\n            }\n            unchecked {\n                // Overflow not possible: value <= fromBalance <= totalSupply.\n                $._balances[from] = fromBalance - value;\n            }\n        }\n\n        if (to == address(0)) {\n            unchecked {\n                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n                $._totalSupply -= value;\n            }\n        } else {\n            unchecked {\n                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n                $._balances[to] += value;\n            }\n        }\n\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n     * Relies on the `_update` mechanism\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _mint(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(address(0), account, value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n     * Relies on the `_update` mechanism.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead\n     */\n    function _burn(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        _update(account, address(0), value);\n    }\n\n    /**\n     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address owner, address spender, uint256 value) internal {\n        _approve(owner, spender, value, true);\n    }\n\n    /**\n     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n     *\n     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n     * `_spendAllowance` during the `transferFrom` operation sets the flag to false. This saves gas by not emitting any\n     * `Approval` event during `transferFrom` operations.\n     *\n     * Anyone who wishes to continue emitting `Approval` events on the `transferFrom` operation can force the flag to\n     * true using the following override:\n     *\n     * ```solidity\n     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n     *     super._approve(owner, spender, value, true);\n     * }\n     * ```\n     *\n     * Requirements are the same as {_approve}.\n     */\n    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n        ERC20Storage storage $ = _getERC20Storage();\n        if (owner == address(0)) {\n            revert ERC20InvalidApprover(address(0));\n        }\n        if (spender == address(0)) {\n            revert ERC20InvalidSpender(address(0));\n        }\n        $._allowances[owner][spender] = value;\n        if (emitEvent) {\n            emit Approval(owner, spender, value);\n        }\n    }\n\n    /**\n     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.\n     *\n     * Does not update the allowance value in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Does not emit an {Approval} event.\n     */\n    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance < type(uint256).max) {\n            if (currentAllowance < value) {\n                revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n            }\n            unchecked {\n                _approve(owner, spender, currentAllowance - value, false);\n            }\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/token/ERC20/extensions/IERC20Metadata.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/access/manager/AccessManagedUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/manager/AccessManaged.sol)\n\npragma solidity ^0.8.20;\n\nimport {AuthorityUtils} from \"@openzeppelin/contracts/access/manager/AuthorityUtils.sol\";\nimport {IAccessManager} from \"@openzeppelin/contracts/access/manager/IAccessManager.sol\";\nimport {IAccessManaged} from \"@openzeppelin/contracts/access/manager/IAccessManaged.sol\";\nimport {ContextUpgradeable} from \"../../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev This contract module makes available a {restricted} modifier. Functions decorated with this modifier will be\n * permissioned according to an \"authority\": a contract like {AccessManager} that follows the {IAuthority} interface,\n * implementing a policy that allows certain callers to access certain functions.\n *\n * IMPORTANT: The `restricted` modifier should never be used on `internal` functions, judiciously used in `public`\n * functions, and ideally only used in `external` functions. See {restricted}.\n */\nabstract contract AccessManagedUpgradeable is Initializable, ContextUpgradeable, IAccessManaged {\n    /// @custom:storage-location erc7201:openzeppelin.storage.AccessManaged\n    struct AccessManagedStorage {\n        address _authority;\n\n        bool _consumingSchedule;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.AccessManaged\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant AccessManagedStorageLocation = 0xf3177357ab46d8af007ab3fdb9af81da189e1068fefdc0073dca88a2cab40a00;\n\n    function _getAccessManagedStorage() private pure returns (AccessManagedStorage storage $) {\n        assembly {\n            $.slot := AccessManagedStorageLocation\n        }\n    }\n\n    /**\n     * @dev Initializes the contract connected to an initial authority.\n     */\n    function __AccessManaged_init(address initialAuthority) internal onlyInitializing {\n        __AccessManaged_init_unchained(initialAuthority);\n    }\n\n    function __AccessManaged_init_unchained(address initialAuthority) internal onlyInitializing {\n        _setAuthority(initialAuthority);\n    }\n\n    /**\n     * @dev Restricts access to a function as defined by the connected Authority for this contract and the\n     * caller and selector of the function that entered the contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * In general, this modifier should only be used on `external` functions. It is okay to use it on `public`\n     * functions that are used as external entry points and are not called internally. Unless you know what you're\n     * doing, it should never be used on `internal` functions. Failure to follow these rules can have critical security\n     * implications! This is because the permissions are determined by the function that entered the contract, i.e. the\n     * function at the bottom of the call stack, and not the function where the modifier is visible in the source code.\n     * ====\n     *\n     * [WARNING]\n     * ====\n     * Avoid adding this modifier to the https://docs.soliditylang.org/en/v0.8.20/contracts.html#receive-ether-function[`receive()`]\n     * function or the https://docs.soliditylang.org/en/v0.8.20/contracts.html#fallback-function[`fallback()`]. These\n     * functions are the only execution paths where a function selector cannot be unambiguously determined from the calldata\n     * since the selector defaults to `0x00000000` in the `receive()` function and similarly in the `fallback()` function\n     * if no calldata is provided. (See {_checkCanCall}).\n     *\n     * The `receive()` function will always panic whereas the `fallback()` may panic depending on the calldata length.\n     * ====\n     */\n    modifier restricted() {\n        _checkCanCall(_msgSender(), _msgData());\n        _;\n    }\n\n    /// @inheritdoc IAccessManaged\n    function authority() public view virtual returns (address) {\n        AccessManagedStorage storage $ = _getAccessManagedStorage();\n        return $._authority;\n    }\n\n    /// @inheritdoc IAccessManaged\n    function setAuthority(address newAuthority) public virtual {\n        address caller = _msgSender();\n        if (caller != authority()) {\n            revert AccessManagedUnauthorized(caller);\n        }\n        if (newAuthority.code.length == 0) {\n            revert AccessManagedInvalidAuthority(newAuthority);\n        }\n        _setAuthority(newAuthority);\n    }\n\n    /// @inheritdoc IAccessManaged\n    function isConsumingScheduledOp() public view returns (bytes4) {\n        AccessManagedStorage storage $ = _getAccessManagedStorage();\n        return $._consumingSchedule ? this.isConsumingScheduledOp.selector : bytes4(0);\n    }\n\n    /**\n     * @dev Transfers control to a new authority. Internal function with no access restriction. Allows bypassing the\n     * permissions set by the current authority.\n     */\n    function _setAuthority(address newAuthority) internal virtual {\n        AccessManagedStorage storage $ = _getAccessManagedStorage();\n        $._authority = newAuthority;\n        emit AuthorityUpdated(newAuthority);\n    }\n\n    /**\n     * @dev Reverts if the caller is not allowed to call the function identified by a selector. Panics if the calldata\n     * is less than 4 bytes long.\n     */\n    function _checkCanCall(address caller, bytes calldata data) internal virtual {\n        AccessManagedStorage storage $ = _getAccessManagedStorage();\n        (bool immediate, uint32 delay) = AuthorityUtils.canCallWithDelay(\n            authority(),\n            caller,\n            address(this),\n            bytes4(data[0:4])\n        );\n        if (!immediate) {\n            if (delay > 0) {\n                $._consumingSchedule = true;\n                IAccessManager(authority()).consumeScheduledOp(caller, data);\n                $._consumingSchedule = false;\n            } else {\n                revert AccessManagedUnauthorized(caller);\n            }\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/Strings.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Strings.sol)\n\npragma solidity ^0.8.24;\n\nimport {Math} from \"./math/Math.sol\";\nimport {SafeCast} from \"./math/SafeCast.sol\";\nimport {SignedMath} from \"./math/SignedMath.sol\";\nimport {Bytes} from \"./Bytes.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    using SafeCast for *;\n\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n    uint256 private constant SPECIAL_CHARS_LOOKUP =\n        (1 << 0x08) | // backspace\n            (1 << 0x09) | // tab\n            (1 << 0x0a) | // newline\n            (1 << 0x0c) | // form feed\n            (1 << 0x0d) | // carriage return\n            (1 << 0x22) | // double quote\n            (1 << 0x5c); // backslash\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev The string being parsed contains characters that are not in scope of the given base.\n     */\n    error StringsInvalidChar();\n\n    /**\n     * @dev The string being parsed is not a properly formatted address.\n     */\n    error StringsInvalidAddressFormat();\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            assembly (\"memory-safe\") {\n                ptr := add(add(buffer, 0x20), length)\n            }\n            while (true) {\n                ptr--;\n                assembly (\"memory-safe\") {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal\n     * representation, according to EIP-55.\n     */\n    function toChecksumHexString(address addr) internal pure returns (string memory) {\n        bytes memory buffer = bytes(toHexString(addr));\n\n        // hash the hex part of buffer (skip length + 2 bytes, length 40)\n        uint256 hashValue;\n        assembly (\"memory-safe\") {\n            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))\n        }\n\n        for (uint256 i = 41; i > 1; --i) {\n            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)\n            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {\n                // case shift by xoring with 0x20\n                buffer[i] ^= 0x20;\n            }\n            hashValue >>= 4;\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts a `bytes` buffer to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(bytes memory input) internal pure returns (string memory) {\n        unchecked {\n            bytes memory buffer = new bytes(2 * input.length + 2);\n            buffer[0] = \"0\";\n            buffer[1] = \"x\";\n            for (uint256 i = 0; i < input.length; ++i) {\n                uint8 v = uint8(input[i]);\n                buffer[2 * i + 2] = HEX_DIGITS[v >> 4];\n                buffer[2 * i + 3] = HEX_DIGITS[v & 0xf];\n            }\n            return string(buffer);\n        }\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return Bytes.equal(bytes(a), bytes(b));\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input) internal pure returns (uint256) {\n        return parseUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        uint256 result = 0;\n        for (uint256 i = begin; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 9) return (false, 0);\n            result *= 10;\n            result += chr;\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `int256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input) internal pure returns (int256) {\n        return parseInt(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {\n        (bool success, int256 value) = tryParseInt(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if\n     * the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {\n        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    uint256 private constant ABS_MIN_INT256 = 2 ** 255;\n\n    /**\n     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character or if the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, int256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseIntUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseIntUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, int256 value) {\n        bytes memory buffer = bytes(input);\n\n        // Check presence of a negative sign.\n        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        bool positiveSign = sign == bytes1(\"+\");\n        bool negativeSign = sign == bytes1(\"-\");\n        uint256 offset = (positiveSign || negativeSign).toUint();\n\n        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);\n\n        if (absSuccess && absValue < ABS_MIN_INT256) {\n            return (true, negativeSign ? -int256(absValue) : int256(absValue));\n        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {\n            return (true, type(int256).min);\n        } else return (false, 0);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input) internal pure returns (uint256) {\n        return parseHexUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseHexUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an\n     * invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseHexUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseHexUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        // skip 0x prefix if present\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 offset = hasPrefix.toUint() * 2;\n\n        uint256 result = 0;\n        for (uint256 i = begin + offset; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 15) return (false, 0);\n            result *= 16;\n            unchecked {\n                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).\n                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.\n                result += chr;\n            }\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as an `address`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input) internal pure returns (address) {\n        return parseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {\n        (bool success, address value) = tryParseAddress(input, begin, end);\n        if (!success) revert StringsInvalidAddressFormat();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly\n     * formatted address. See {parseAddress-string} requirements.\n     */\n    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {\n        return tryParseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly\n     * formatted address. See {parseAddress-string-uint256-uint256} requirements.\n     */\n    function tryParseAddress(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, address value) {\n        if (end > bytes(input).length || begin > end) return (false, address(0));\n\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;\n\n        // check that input is the correct length\n        if (end - begin == expectedLength) {\n            // length guarantees that this does not overflow, and value is at most type(uint160).max\n            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);\n            return (s, address(uint160(v)));\n        } else {\n            return (false, address(0));\n        }\n    }\n\n    function _tryParseChr(bytes1 chr) private pure returns (uint8) {\n        uint8 value = uint8(chr);\n\n        // Try to parse `chr`:\n        // - Case 1: [0-9]\n        // - Case 2: [a-f]\n        // - Case 3: [A-F]\n        // - otherwise not supported\n        unchecked {\n            if (value > 47 && value < 58) value -= 48;\n            else if (value > 96 && value < 103) value -= 87;\n            else if (value > 64 && value < 71) value -= 55;\n            else return type(uint8).max;\n        }\n\n        return value;\n    }\n\n    /**\n     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.\n     *\n     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.\n     *\n     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of\n     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode\n     * characters that are not in this range, but other tooling may provide different results.\n     */\n    function escapeJSON(string memory input) internal pure returns (string memory) {\n        bytes memory buffer = bytes(input);\n        bytes memory output = new bytes(2 * buffer.length); // worst case scenario\n        uint256 outputLength = 0;\n\n        for (uint256 i = 0; i < buffer.length; ++i) {\n            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));\n            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {\n                output[outputLength++] = \"\\\\\";\n                if (char == 0x08) output[outputLength++] = \"b\";\n                else if (char == 0x09) output[outputLength++] = \"t\";\n                else if (char == 0x0a) output[outputLength++] = \"n\";\n                else if (char == 0x0c) output[outputLength++] = \"f\";\n                else if (char == 0x0d) output[outputLength++] = \"r\";\n                else if (char == 0x5c) output[outputLength++] = \"\\\\\";\n                else if (char == 0x22) {\n                    // solhint-disable-next-line quotes\n                    output[outputLength++] = '\"';\n                }\n            } else {\n                output[outputLength++] = char;\n            }\n        }\n        // write the actual length and deallocate unused memory\n        assembly (\"memory-safe\") {\n            mstore(output, outputLength)\n            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))\n        }\n\n        return string(output);\n    }\n\n    /**\n     * @dev Reads a bytes32 from a bytes array without bounds checking.\n     *\n     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the\n     * assembly block as such would prevent some optimizations.\n     */\n    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {\n        // This is not memory safe in the general case, but all calls to this private function are within bounds.\n        assembly (\"memory-safe\") {\n            value := mload(add(add(buffer, 0x20), offset))\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/access/manager/IAccessManaged.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/manager/IAccessManaged.sol)\n\npragma solidity >=0.8.4;\n\ninterface IAccessManaged {\n    /**\n     * @dev Authority that manages this contract was updated.\n     */\n    event AuthorityUpdated(address authority);\n\n    error AccessManagedUnauthorized(address caller);\n    error AccessManagedRequiredDelay(address caller, uint32 delay);\n    error AccessManagedInvalidAuthority(address authority);\n\n    /**\n     * @dev Returns the current authority.\n     */\n    function authority() external view returns (address);\n\n    /**\n     * @dev Transfers control to a new authority. The caller must be the current authority.\n     */\n    function setAuthority(address) external;\n\n    /**\n     * @dev Returns true only in the context of a delayed restricted call, at the moment that the scheduled operation is\n     * being consumed. Prevents denial of service for delayed restricted calls in the case that the contract performs\n     * attacker controlled calls.\n     */\n    function isConsumingScheduledOp() external view returns (bytes4);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/Address.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\nimport {Errors} from \"./Errors.sol\";\nimport {LowLevelCall} from \"./LowLevelCall.sol\";\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert Errors.InsufficientBalance(address(this).balance, amount);\n        }\n        if (LowLevelCall.callNoReturn(recipient, amount, \"\")) {\n            // call successful, nothing to do\n            return;\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {Errors.FailedCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        bool success = LowLevelCall.callNoReturn(target, value, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        bool success = LowLevelCall.staticcallNoReturn(target, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        bool success = LowLevelCall.delegatecallNoReturn(target, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case\n     * of an unsuccessful call.\n     *\n     * NOTE: This function is DEPRECATED and may be removed in the next major release.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        // only check if target is a contract if the call was successful and the return data is empty\n        // otherwise we already know that it was a contract\n        if (success && (returndata.length > 0 || target.code.length > 0)) {\n            return returndata;\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (returndata.length > 0) {\n            LowLevelCall.bubbleRevert(returndata);\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {Errors.FailedCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else if (returndata.length > 0) {\n            LowLevelCall.bubbleRevert(returndata);\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-upgradeable-5.5.0/utils/PausableUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/Pausable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract PausableUpgradeable is Initializable, ContextUpgradeable {\n    /// @custom:storage-location erc7201:openzeppelin.storage.Pausable\n    struct PausableStorage {\n        bool _paused;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Pausable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;\n\n    function _getPausableStorage() private pure returns (PausableStorage storage $) {\n        assembly {\n            $.slot := PausableStorageLocation\n        }\n    }\n\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    /**\n     * @dev The operation failed because the contract is paused.\n     */\n    error EnforcedPause();\n\n    /**\n     * @dev The operation failed because the contract is not paused.\n     */\n    error ExpectedPause();\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    function __Pausable_init() internal onlyInitializing {\n    }\n\n    function __Pausable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        PausableStorage storage $ = _getPausableStorage();\n        return $._paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        if (paused()) {\n            revert EnforcedPause();\n        }\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        if (!paused()) {\n            revert ExpectedPause();\n        }\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        PausableStorage storage $ = _getPausableStorage();\n        $._paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        PausableStorage storage $ = _getPausableStorage();\n        $._paused = false;\n        emit Unpaused(_msgSender());\n    }\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/interfaces/draft-IERC6093.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (interfaces/draft-IERC6093.sol)\n\npragma solidity >=0.8.4;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-721.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"},{"file_path":"node_modules/@chainlink/contracts-ccip/contracts/interfaces/IGetCCIPAdmin.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\ninterface IGetCCIPAdmin {\n  /// @notice Returns the admin of the token.\n  /// @dev This method is named to never conflict with existing methods.\n  function getCCIPAdmin() external view returns (address);\n}\n"},{"file_path":"dependencies/@openzeppelin-contracts-5.5.0/utils/math/SafeCast.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n    /**\n     * @dev Value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n    /**\n     * @dev An int value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedIntToUint(int256 value);\n\n    /**\n     * @dev Value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n    /**\n     * @dev An uint value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedUintToInt(uint256 value);\n\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        if (value > type(uint248).max) {\n            revert SafeCastOverflowedUintDowncast(248, value);\n        }\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        if (value > type(uint240).max) {\n            revert SafeCastOverflowedUintDowncast(240, value);\n        }\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        if (value > type(uint232).max) {\n            revert SafeCastOverflowedUintDowncast(232, value);\n        }\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        if (value > type(uint224).max) {\n            revert SafeCastOverflowedUintDowncast(224, value);\n        }\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        if (value > type(uint216).max) {\n            revert SafeCastOverflowedUintDowncast(216, value);\n        }\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        if (value > type(uint208).max) {\n            revert SafeCastOverflowedUintDowncast(208, value);\n        }\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        if (value > type(uint200).max) {\n            revert SafeCastOverflowedUintDowncast(200, value);\n        }\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        if (value > type(uint192).max) {\n            revert SafeCastOverflowedUintDowncast(192, value);\n        }\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        if (value > type(uint184).max) {\n            revert SafeCastOverflowedUintDowncast(184, value);\n        }\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        if (value > type(uint176).max) {\n            revert SafeCastOverflowedUintDowncast(176, value);\n        }\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        if (value > type(uint168).max) {\n            revert SafeCastOverflowedUintDowncast(168, value);\n        }\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        if (value > type(uint160).max) {\n            revert SafeCastOverflowedUintDowncast(160, value);\n        }\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        if (value > type(uint152).max) {\n            revert SafeCastOverflowedUintDowncast(152, value);\n        }\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        if (value > type(uint144).max) {\n            revert SafeCastOverflowedUintDowncast(144, value);\n        }\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        if (value > type(uint136).max) {\n            revert SafeCastOverflowedUintDowncast(136, value);\n        }\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        if (value > type(uint128).max) {\n            revert SafeCastOverflowedUintDowncast(128, value);\n        }\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        if (value > type(uint120).max) {\n            revert SafeCastOverflowedUintDowncast(120, value);\n        }\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        if (value > type(uint112).max) {\n            revert SafeCastOverflowedUintDowncast(112, value);\n        }\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        if (value > type(uint104).max) {\n            revert SafeCastOverflowedUintDowncast(104, value);\n        }\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        if (value > type(uint96).max) {\n            revert SafeCastOverflowedUintDowncast(96, value);\n        }\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        if (value > type(uint88).max) {\n            revert SafeCastOverflowedUintDowncast(88, value);\n        }\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        if (value > type(uint80).max) {\n            revert SafeCastOverflowedUintDowncast(80, value);\n        }\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        if (value > type(uint72).max) {\n            revert SafeCastOverflowedUintDowncast(72, value);\n        }\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        if (value > type(uint64).max) {\n            revert SafeCastOverflowedUintDowncast(64, value);\n        }\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        if (value > type(uint56).max) {\n            revert SafeCastOverflowedUintDowncast(56, value);\n        }\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        if (value > type(uint48).max) {\n            revert SafeCastOverflowedUintDowncast(48, value);\n        }\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        if (value > type(uint40).max) {\n            revert SafeCastOverflowedUintDowncast(40, value);\n        }\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        if (value > type(uint32).max) {\n            revert SafeCastOverflowedUintDowncast(32, value);\n        }\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        if (value > type(uint24).max) {\n            revert SafeCastOverflowedUintDowncast(24, value);\n        }\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        if (value > type(uint16).max) {\n            revert SafeCastOverflowedUintDowncast(16, value);\n        }\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        if (value > type(uint8).max) {\n            revert SafeCastOverflowedUintDowncast(8, value);\n        }\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        if (value < 0) {\n            revert SafeCastOverflowedIntToUint(value);\n        }\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(248, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(240, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(232, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(224, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(216, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(208, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(200, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(192, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(184, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(176, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(168, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(160, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(152, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(144, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(136, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(128, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(120, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(112, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(104, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(96, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(88, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(80, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(72, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(64, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(56, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(48, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(40, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(32, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(24, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(16, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(8, value);\n        }\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        if (value > uint256(type(int256).max)) {\n            revert SafeCastOverflowedUintToInt(value);\n        }\n        return int256(value);\n    }\n\n    /**\n     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.\n     */\n    function toUint(bool b) internal pure returns (uint256 u) {\n        assembly (\"memory-safe\") {\n            u := iszero(iszero(b))\n        }\n    }\n}\n"}],"certified":false,"conflicting_implementations":null,"abi":[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"authority","type":"address"}],"name":"AccessManagedInvalidAuthority","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"uint32","name":"delay","type":"uint32"}],"name":"AccessManagedRequiredDelay","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"AccessManagedUnauthorized","type":"error"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"denied","type":"address"}],"name":"Denied","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"ERC1967InvalidImplementation","type":"error"},{"inputs":[],"name":"ERC1967NonPayable","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"FailedCall","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[{"internalType":"string","name":"param","type":"string"}],"name":"InvalidAddress","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"InvalidSupplyCap","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"uint256","name":"requestedAmount","type":"uint256"},{"internalType":"uint256","name":"availableCapacity","type":"uint256"}],"name":"SupplyCapExceeded","type":"error"},{"inputs":[],"name":"UUPSUnauthorizedCallContext","type":"error"},{"inputs":[{"internalType":"bytes32","name":"slot","type":"bytes32"}],"name":"UUPSUnsupportedProxiableUUID","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"authority","type":"address"}],"name":"AuthorityUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldAdmin","type":"address"},{"indexed":true,"internalType":"address","name":"newAdmin","type":"address"}],"name":"CCIPAdminUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldDenyList","type":"address"},{"indexed":true,"internalType":"address","name":"newDenyList","type":"address"}],"name":"DenyListUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldCap","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newCap","type":"uint256"}],"name":"SupplyCapUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"UPGRADE_INTERFACE_VERSION","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"authority","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"denyList","outputs":[{"internalType":"contract IAddressList","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCCIPAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"address","name":"initialAuthority","type":"address"},{"internalType":"address","name":"initialDenyList","type":"address"},{"internalType":"uint256","name":"initialSupplyCap","type":"uint256"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isConsumingScheduledOp","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newAuthority","type":"address"}],"name":"setAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"setCCIPAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IAddressList","name":"newDenyList","type":"address"}],"name":"setDenyList","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newSupplyCap","type":"uint256"}],"name":"setSupplyCap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"supplyCap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"supplyCapRemaining","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}],"is_changed_bytecode":false,"is_partially_verified":false,"constructor_args":null}