{"file_path":"contracts/vaults/dstake/DStakeTokenV2.sol","creation_status":"success","source_code":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport { ERC4626Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol\";\nimport { ERC20Upgradeable } from \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol\";\nimport { AccessControlUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol\";\nimport { IERC20 } from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport { IDStakeCollateralVaultV2 } from \"./interfaces/IDStakeCollateralVaultV2.sol\";\nimport { IDStakeRouterV2 } from \"./interfaces/IDStakeRouterV2.sol\";\nimport { BasisPointConstants } from \"../../common/BasisPointConstants.sol\";\nimport { WithdrawalFeeMath } from \"../../common/WithdrawalFeeMath.sol\";\nimport { SafeERC20 } from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport { Math } from \"@openzeppelin/contracts/utils/math/Math.sol\";\n\ncontract DStakeTokenV2 is Initializable, ERC4626Upgradeable, AccessControlUpgradeable {\n using SafeERC20 for IERC20;\n using Math for uint256;\n\n // --- Roles ---\n bytes32 public constant FEE_MANAGER_ROLE = keccak256(\"FEE_MANAGER_ROLE\");\n\n // --- Errors ---\n error ZeroAddress();\n error ZeroShares();\n error RouterNotSet();\n error RouterOnly();\n error ERC4626ExceedsMaxWithdraw(uint256 assets, uint256 maxAssets);\n error ERC4626ExceedsMaxRedeem(uint256 shares, uint256 maxShares);\n error RouterCollateralMismatch(address router, address expectedVault, address actualVault);\n error RouterTokenMismatch(address router, address expectedToken, address actualToken);\n error RouterShortfallOutstanding(uint256 shortfall);\n\n // --- State ---\n IDStakeCollateralVaultV2 public collateralVault;\n IDStakeRouterV2 public router;\n\n uint256 public constant MAX_WITHDRAWAL_FEE_BPS = BasisPointConstants.ONE_PERCENT_BPS;\n\n // --- Events ---\n event RouterSet(address indexed newRouter);\n event CollateralVaultSet(address indexed newCollateralVault);\n\n /// @custom:oz-upgrades-unsafe-allow constructor\n constructor() {\n _disableInitializers();\n }\n\n function initialize(\n IERC20 _dStable,\n string memory _name,\n string memory _symbol,\n address _initialAdmin,\n address _initialFeeManager\n ) public initializer {\n __ERC20_init(_name, _symbol);\n __ERC4626_init(_dStable);\n __AccessControl_init();\n\n if (address(_dStable) == address(0) || _initialAdmin == address(0) || _initialFeeManager == address(0)) {\n revert ZeroAddress();\n }\n\n _grantRole(DEFAULT_ADMIN_ROLE, _initialAdmin);\n _grantRole(FEE_MANAGER_ROLE, _initialFeeManager);\n }\n\n // --- Fee helpers ---\n function withdrawalFeeBps() public view returns (uint256) {\n if (address(router) == address(0)) {\n return 0;\n }\n return router.withdrawalFeeBps();\n }\n\n function maxWithdrawalFeeBps() public pure returns (uint256) {\n return MAX_WITHDRAWAL_FEE_BPS;\n }\n\n function _calculateWithdrawalFee(uint256 grossAmount) internal view returns (uint256) {\n return WithdrawalFeeMath.calculateWithdrawalFee(grossAmount, withdrawalFeeBps());\n }\n\n function _getNetAmountAfterFee(uint256 grossAmount) internal view returns (uint256) {\n return WithdrawalFeeMath.netAfterFee(grossAmount, withdrawalFeeBps());\n }\n\n function _getGrossAmountRequiredForNet(uint256 netAmount) internal view returns (uint256) {\n return WithdrawalFeeMath.grossFromNet(netAmount, withdrawalFeeBps());\n }\n\n // --- Accounting ---\n function totalAssets() public view virtual override returns (uint256) {\n uint256 grossAssets = _grossTotalAssets();\n if (grossAssets == 0) {\n return 0;\n }\n\n uint256 shortfall = address(router) == address(0) ? 0 : router.currentShortfall();\n return shortfall >= grossAssets ? 0 : grossAssets - shortfall;\n }\n\n function _grossTotalAssets() internal view returns (uint256) {\n if (address(router) == address(0)) {\n return 0;\n }\n return router.totalManagedAssets();\n }\n\n function grossTotalAssets() public view returns (uint256) {\n return _grossTotalAssets();\n }\n\n function _convertToSharesUsingNet(uint256 assets, Math.Rounding rounding) internal view returns (uint256) {\n if (assets == 0) {\n return 0;\n }\n\n uint256 supply = totalSupply() + 10 ** _decimalsOffset();\n uint256 netAssets = totalAssets();\n return Math.mulDiv(assets, supply, netAssets + 1, rounding);\n }\n\n function _convertToAssetsUsingNet(uint256 shares, Math.Rounding rounding) internal view returns (uint256) {\n if (shares == 0) {\n return 0;\n }\n\n uint256 supply = totalSupply() + 10 ** _decimalsOffset();\n uint256 netAssets = totalAssets();\n return Math.mulDiv(shares, netAssets + 1, supply, rounding);\n }\n\n function convertToShares(uint256 assets) public view virtual override returns (uint256) {\n return previewDeposit(assets);\n }\n\n function convertToAssets(uint256 shares) public view virtual override returns (uint256) {\n return _convertToAssetsUsingNet(shares, Math.Rounding.Floor);\n }\n\n function previewDeposit(uint256 assets) public view virtual override returns (uint256) {\n return _convertToSharesUsingNet(assets, Math.Rounding.Floor);\n }\n\n function previewMint(uint256 shares) public view virtual override returns (uint256) {\n return _convertToAssetsUsingNet(shares, Math.Rounding.Ceil);\n }\n\n function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {\n uint256 grossAssetsRequired = _getGrossAmountRequiredForNet(assets);\n return super.previewWithdraw(grossAssetsRequired);\n }\n\n function previewRedeem(uint256 shares) public view virtual override returns (uint256) {\n uint256 grossAssets = super.previewRedeem(shares);\n return _getNetAmountAfterFee(grossAssets);\n }\n\n // --- Limits ---\n function maxDeposit(address receiver) public view virtual override returns (uint256) {\n if (address(router) == address(0)) {\n return 0;\n }\n try router.maxDeposit(receiver) returns (uint256 limit) {\n return limit;\n } catch {\n return 0;\n }\n }\n\n function maxMint(address receiver) public view virtual override returns (uint256) {\n if (address(router) == address(0)) {\n return 0;\n }\n try router.maxMint(receiver) returns (uint256 limit) {\n return limit;\n } catch {\n return 0;\n }\n }\n\n function maxWithdraw(address owner) public view virtual override returns (uint256) {\n if (address(router) == address(0)) {\n uint256 grossAssets = convertToAssets(balanceOf(owner));\n return _getNetAmountAfterFee(grossAssets);\n }\n try router.maxWithdraw(owner) returns (uint256 limit) {\n return limit;\n } catch {\n return 0;\n }\n }\n\n function maxRedeem(address owner) public view virtual override returns (uint256) {\n if (address(router) == address(0)) {\n return balanceOf(owner);\n }\n try router.maxRedeem(owner) returns (uint256 limit) {\n return limit;\n } catch {\n return 0;\n }\n }\n\n // --- ERC4626 core overrides ---\n function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual override {\n if (shares == 0) {\n revert ZeroShares();\n }\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n\n super._deposit(caller, receiver, assets, shares);\n\n IERC20(asset()).forceApprove(address(router), assets);\n router.handleDeposit(caller, assets, shares, receiver);\n IERC20(asset()).forceApprove(address(router), 0);\n }\n\n function withdraw(\n uint256 assets,\n address receiver,\n address owner\n ) public virtual override returns (uint256 shares) {\n uint256 maxAssets = maxWithdraw(owner);\n if (assets > maxAssets) {\n revert ERC4626ExceedsMaxWithdraw(assets, maxAssets);\n }\n\n shares = previewWithdraw(assets);\n if (shares == 0 && assets > 0) {\n revert ZeroShares();\n }\n\n uint256 maxRedeemShares = maxRedeem(owner);\n if (shares > maxRedeemShares) {\n revert ERC4626ExceedsMaxRedeem(shares, maxRedeemShares);\n }\n\n uint256 grossAssets = _getGrossAmountRequiredForNet(assets);\n _withdraw(_msgSender(), receiver, owner, grossAssets, shares);\n return shares;\n }\n\n function redeem(uint256 shares, address receiver, address owner) public virtual override returns (uint256 assets) {\n uint256 maxRedeemShares = maxRedeem(owner);\n if (shares > maxRedeemShares) {\n revert ERC4626ExceedsMaxRedeem(shares, maxRedeemShares);\n }\n\n uint256 grossAssets = super.previewRedeem(shares);\n assets = _getNetAmountAfterFee(grossAssets);\n _withdraw(_msgSender(), receiver, owner, grossAssets, shares);\n return assets;\n }\n\n function _withdraw(\n address caller,\n address receiver,\n address owner,\n uint256 assets,\n uint256 shares\n ) internal virtual override {\n if (caller != owner) {\n _spendAllowance(owner, caller, shares);\n }\n\n if (assets == 0 || shares == 0) {\n if (shares > 0) {\n _burn(owner, shares);\n }\n emit Withdraw(caller, receiver, owner, 0, shares);\n return;\n }\n\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n\n _burn(owner, shares);\n\n uint256 expectedNet = _getNetAmountAfterFee(assets);\n (uint256 netAssets, ) = router.handleWithdraw(caller, receiver, owner, assets, expectedNet);\n\n emit Withdraw(caller, receiver, owner, netAssets, shares);\n }\n\n // --- Fee management proxies ---\n function reinvestFees() external returns (uint256 amountReinvested) {\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n\n (uint256 amount, uint256 incentive) = router.reinvestFees();\n if (incentive > 0) {\n IERC20(asset()).safeTransfer(_msgSender(), incentive);\n }\n\n return amount;\n }\n\n function setWithdrawalFee(uint256 feeBps) external onlyRole(FEE_MANAGER_ROLE) {\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n router.setWithdrawalFee(feeBps);\n }\n\n function setReinvestIncentive(uint256 incentiveBps) external onlyRole(FEE_MANAGER_ROLE) {\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n router.setReinvestIncentive(incentiveBps);\n }\n\n function setSettlementShortfall(uint256 newShortfall) external onlyRole(DEFAULT_ADMIN_ROLE) {\n if (address(router) == address(0)) {\n revert RouterNotSet();\n }\n\n uint256 current = router.currentShortfall();\n if (newShortfall >= current) {\n router.recordShortfall(newShortfall - current);\n } else {\n router.clearShortfall(current - newShortfall);\n }\n }\n\n // --- Administration ---\n function migrateCore(address newRouter, address newCollateralVault) external onlyRole(DEFAULT_ADMIN_ROLE) {\n if (newRouter == address(0) || newCollateralVault == address(0)) {\n revert ZeroAddress();\n }\n\n if (address(router) != address(0)) {\n uint256 shortfall = router.currentShortfall();\n if (shortfall > 0) {\n revert RouterShortfallOutstanding(shortfall);\n }\n }\n\n IDStakeRouterV2 routerCandidate = IDStakeRouterV2(newRouter);\n if (routerCandidate.collateralVault() != IDStakeCollateralVaultV2(newCollateralVault)) {\n revert RouterCollateralMismatch(newRouter, newCollateralVault, address(routerCandidate.collateralVault()));\n }\n\n if (routerCandidate.dStakeToken() != address(this)) {\n revert RouterTokenMismatch(newRouter, address(this), routerCandidate.dStakeToken());\n }\n\n router = routerCandidate;\n collateralVault = IDStakeCollateralVaultV2(newCollateralVault);\n\n emit RouterSet(newRouter);\n emit CollateralVaultSet(newCollateralVault);\n }\n\n // --- Router hooks ---\n function mintForRouter(address initiator, address receiver, uint256 assets, uint256 shares) external {\n if (_msgSender() != address(router)) {\n revert RouterOnly();\n }\n if (shares == 0) {\n revert ZeroShares();\n }\n _mint(receiver, shares);\n emit Deposit(initiator, receiver, assets, shares);\n }\n\n function burnFromRouter(\n address initiator,\n address receiver,\n address owner,\n uint256 netAssets,\n uint256 shares\n ) external {\n if (_msgSender() != address(router)) {\n revert RouterOnly();\n }\n if (shares == 0) {\n revert ZeroShares();\n }\n if (initiator != owner) {\n _spendAllowance(owner, initiator, shares);\n }\n _burn(owner, shares);\n emit Withdraw(initiator, receiver, owner, netAssets, shares);\n }\n}\n","deployed_bytecode":"0x6080604052600436101561001257600080fd5b6000803560e01c806301e1d1141461195e57806301ffc9a71461190757806304336bb3146118ec57806305db2f41146118b157806306fdde031461180e57806307a2d13a146117ef578063095ea7b31461173e5780630a28a477146117145780630bece79c146116ed57806318160ddd146116c25780631bbf1224146105bf5780631de348361461160d57806323b872dd146115d4578063248a9ca31461159a5780632f2ff15d1461154f578063313ce5671461150057806336568abe146114b857806338d52e0f14611482578063402d267d1461145e57806341417cb5146111665780634b69e0c2146110cf5780634cdad5061461109f5780636cf1dbed14610ae55780636e553f6514610a6c57806370a0823114610a265780637b1870d61461093c57806391d14854146108e657806394bf804d1461086a57806395d89b4114610789578063a217fddf1461076d578063a9059cbb1461073b578063ac1e5025146106cd578063b3d7f6b9146106ae578063b460af94146105dc578063b6783edd146105bf578063ba08765214610555578063c63d75b614610531578063c6e6f592146103a9578063ca54da6e14610516578063ce96cb77146104f2578063cf1638ba1461048d578063d547741f1461043e578063d905777e1461041a578063dd62ed3e146103d0578063ef8b30f7146103a9578063f3fd93251461024d5763f887ea401461022257600080fd5b3461024a578060031936011261024a576001546040516001600160a01b039091168152602090f35b80fd5b503461024a57602036600319011261024a5760043561026a611b27565b6001546001600160a01b039190821690811561039757604051630c34575960e01b81528493602082600481875afa91821561038c578592610351575b50818310610311576001541692506102bd916121fb565b813b1561030d57829160248392604051948593849263ad07f2d160e01b845260048401525af18015610302576102f257505080f35b6102fb906119ee565b61024a5780f35b6040513d84823e3d90fd5b5050fd5b509061031c916121fb565b813b1561030d57829160248392604051948593849263cb4750cb60e01b845260048401525af18015610302576102f257505080f35b945090506020843d8211610384575b8161036d60209383611a34565b8101031261037f5784935190386102a6565b600080fd5b3d9150610360565b6040513d87823e3d90fd5b60405163179ce99f60e01b8152600490fd5b503461024a57602036600319011261024a5760206103c8600435612521565b604051908152f35b503461024a57604036600319011261024a576103ea6119c2565b6103fb6103f56119d8565b91611aee565b9060018060a01b03166000526020526020604060002054604051908152f35b503461024a57602036600319011261024a5760206103c86104396119c2565b6127f1565b503461024a57604036600319011261024a5761048960043561045e6119d8565b90808452600080516020612ef28339815191526020526104846001604086200154611bdb565b611df7565b5080f35b503461024a57602036600319011261024a576104a7611b7f565b6001546001600160a01b03168015610397578082913b156104ef5781809160246040518094819363678b1c5d60e11b835260043560048401525af18015610302576102f25750f35b50fd5b503461024a57602036600319011261024a5760206103c86105116119c2565b61277e565b503461024a578060031936011261024a5760206103c86122aa565b503461024a57602036600319011261024a5760206103c86105506119c2565b612736565b503461024a5761056436611ab9565b610570819392936127f1565b8083116105a1576020846103c8858561058882612682565b9061059a61059461217f565b8361261e565b9433612c09565b826044916040519163024a2e0560e61b835260048301526024820152fd5b503461024a578060031936011261024a5760206040516127108152f35b503461024a576105eb36611ab9565b6105f78193929361277e565b808311610690575061061861061361060d61217f565b84612598565b61255f565b91821580610687575b6106755761062e826127f1565b80841161065757506020936103c892610650859361064a61217f565b90612598565b9133612c09565b836044916040519163024a2e0560e61b835260048301526024820152fd5b604051639811e0c760e01b8152600490fd5b50801515610621565b8260449160405191632b6e39c760e21b835260048301526024820152fd5b503461024a57602036600319011261024a5760206103c8600435612322565b503461024a57602036600319011261024a576106e7611b7f565b6001546001600160a01b03168015610397578082913b156104ef57819060246040518094819363ac1e502560e01b835260043560048401525af180156103025761072f575080f35b610738906119ee565b80f35b503461024a57604036600319011261024a576107626107586119c2565b6024359033611eb4565b602060405160018152f35b503461024a578060031936011261024a57602090604051908152f35b503461024a578060031936011261024a576040519080600080516020612eb2833981519152908154906107bb82611e7a565b8086529260019280841690811561083d57506001146107f5575b6107f1866107e581880382611a34565b60405191829182611979565b0390f35b81529250600080516020612f328339815191525b8284106108255750505081016020016107e5826107f1386107d5565b80546020858701810191909152909301928101610809565b90508695506107f1969350602092506107e594915060ff191682840152151560051b8201019293386107d5565b503461024a57604036600319011261024a576004356108876119d8565b61089081612736565b8083116108af57506103c8826108a7602094612322565b80933361285c565b60405163284ff66760e01b81526001600160a01b0392909216600483015260248201929092526044810191909152606490fd5b0390fd5b503461024a57604036600319011261024a5760ff60406020926109076119d8565b6004358252600080516020612ef283398151915285528282206001600160a01b03909116825284522054604051911615158152f35b503461024a578060031936011261024a576001546001600160a01b0390811690811561039757604083926004825180968193633d8c386b60e11b83525af19081156103025760209383926109f2575b508161099c575b5050604051908152f35b600080516020612f128339815191525460405163a9059cbb60e01b8682015233602482015260448101939093526109eb9291166109e682606481015b03601f198101845283611a34565b612b97565b3880610992565b909250610a17915060403d604011610a1f575b610a0f8183611a34565b810190612bf3565b90913861098b565b503d610a05565b503461024a57602036600319011261024a576020906040906001600160a01b03610a4e6119c2565b168152600080516020612e9283398151915283522054604051908152f35b503461024a57604036600319011261024a57600435610a896119d8565b610a92816126ba565b808311610ab2576020836103c884610aa983612521565b9283913361285c565b604051633c8097d960e11b81526001600160a01b0392909216600483015260248201929092526044810191909152606490fd5b503461024a5760a036600319011261024a576001600160a01b0390600435808316900361024a5760243567ffffffffffffffff811161109b57610b2c903690600401611a72565b60443567ffffffffffffffff811161109757610b4c903690600401611a72565b928060643516606435036110975780608435166084350361109757600080516020612f52833981519152549167ffffffffffffffff831680159081611087575b600114908161107d575b159081611074575b5061106257600167ffffffffffffffff19841617600080516020612f528339815191525560ff8360401c1615611035575b610bd761209b565b610bdf61209b565b80519067ffffffffffffffff8211611021578190610c0b600080516020612e7283398151915254611e7a565b601f8111610fa2575b50602090601f8311600114610f12578692610f07575b50508160011b916000199060031b1c191617600080516020612e72833981519152555b835167ffffffffffffffff8111610ef357610c76600080516020612eb283398151915254611e7a565b601f8111610e7f575b50602094601f8211600114610df5579484958293949592610dea575b50508160011b916000199060031b1c191617600080516020612eb2833981519152555b610cc661209b565b610cce61209b565b610cd96004356120ca565b9015610de2575b600080516020612f1283398151915280546001600160a81b03191660a09290921b60ff60a01b16919091176004358316179055610d1b61209b565b806004351615908115610dd5575b8115610dc8575b50610db65760ff90610d43606435611c0e565b50610d4f608435611cae565b5060401c1615610d5c5780f35b68ff000000000000000019600080516020612f528339815191525416600080516020612f52833981519152557fc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d2602060405160018152a180f35b60405163d92e233d60e01b8152600490fd5b9050608435161538610d30565b6064358116159150610d29565b506012610ce0565b015190503880610c9b565b600080516020612eb28339815191528552601f19821695600080516020612f3283398151915291865b888110610e6757508360019596979810610e4e575b505050811b01600080516020612eb283398151915255610cbe565b015160001960f88460031b161c19169055388080610e33565b91926020600181928685015181550194019201610e1e565b600080516020612eb28339815191528552601f820160051c600080516020612f328339815191520160208310610ede575b601f820160051c600080516020612f32833981519152018110610ed35750610c7f565b858155600101610eb0565b50600080516020612f32833981519152610eb0565b634e487b7160e01b84526041600452602484fd5b015190503880610c2a565b9250600080516020612e728339815191528652600080516020612e528339815191529086935b601f1984168510610f87576001945083601f19811610610f6e575b505050811b01600080516020612e7283398151915255610c4d565b015160001960f88460031b161c19169055388080610f53565b81810151835560209485019460019093019290910190610f38565b909150600080516020612e728339815191528652601f830160051c600080516020612e52833981519152016020841061100c575b908392915b601f820160051c600080516020612e52833981519152018110610ffe5750610c14565b878155849350600101610fdb565b50600080516020612e52833981519152610fd6565b634e487b7160e01b85526041600452602485fd5b68ffffffffffffffffff1983166801000000000000000117600080516020612f5283398151915255610bcf565b60405163f92ee8a960e01b8152600490fd5b90501538610b9e565b303b159150610b96565b604085901c60ff16159150610b8c565b8280fd5b5080fd5b503461024a57602036600319011261024a5760206103c86110c1600435612682565b6110c961217f565b9061261e565b503461024a57608036600319011261024a576110e96119c2565b6110f16119d8565b600154606435916001600160a01b03918216330361115457821561067557817fdcbc1c05240f31ff3ad067ef1ee35ce4997762752e3a095284754544f4c709d7928261113f86604095612b1e565b8351956044358752602087015216941692a380f35b604051631b05394b60e31b8152600490fd5b503461024a57604036600319011261024a576111806119c2565b6111886119d8565b90611191611b27565b6001600160a01b03918183169182158015611454575b610db65760015491848316806113cf575b506040516302fb39e760e21b8082526020929083836004818a5afa801561132e5788938a916113b2575b508383169889911603611339575050604051632e23efa160e11b8082529183826004818a5afa91821561132e57899261130f575b5030911603611285575050506001600160a01b03199081168217600155835416821783557fc6b438e6a8a59579ce6a4406cbd203b740e0d47b458aae6596339bcd40c40d158380a27fc92ec24b34ad9d3aa14cd5be87b888d7790d40903da5f44c6367b2fb6cdb20838280a280f35b6040519081528692918082600481895afa93841561130357936112d4575b505060405163bb57415b60e01b81526001600160a01b03918216600482015230602482015291166044820152606490fd5b6112f4929350803d106112fc575b6112ec8183611a34565b810190612e32565b9082806112a3565b503d6112e2565b604051903d90823e3d90fd5b611327919250843d86116112fc576112ec8183611a34565b9038611216565b6040513d8b823e3d90fd5b848785808c9460046040518095819382525afa938415611303579361138f575b5050604051635581e2d360e11b81526001600160a01b039182166004820152928116602484015292169091166044820152606490fd5b6108e2935090816113ab92903d106112fc576112ec8183611a34565b9185611359565b6113c99150853d87116112fc576112ec8183611a34565b386111e2565b602060049160405192838092630c34575960e01b82525afa908115611449578791611414575b5080156111b8576024906040519063d4fb2e9d60e01b82526004820152fd5b90506020813d8211611441575b8161142e60209383611a34565b8101031261143d5751386113f5565b8680fd5b3d9150611421565b6040513d89823e3d90fd5b50838216156111a7565b503461024a57602036600319011261024a5760206103c861147d6119c2565b6126ba565b503461024a578060031936011261024a57600080516020612f12833981519152546040516001600160a01b039091168152602090f35b503461024a57604036600319011261024a576114d26119d8565b336001600160a01b038216036114ee5761048990600435611df7565b60405163334bd91960e11b8152600490fd5b503461024a578060031936011261024a5760ff600080516020612f128339815191525460a01c169060ff821161153b57602082604051908152f35b634e487b7160e01b81526011600452602490fd5b503461024a57604036600319011261024a5761048960043561156f6119d8565b90808452600080516020612ef28339815191526020526115956001604086200154611bdb565b611d70565b503461024a57602036600319011261024a57600160406020926004358152600080516020612ef28339815191528452200154604051908152f35b503461024a57606036600319011261024a576107626115f16119c2565b6115f96119d8565b60443591611608833383611fc5565b611eb4565b503461024a5760a036600319011261024a576116276119c2565b61162f6119d8565b6001600160a01b03604435818116939192908481036116be576084359380600154163303611154578415610675577ffbde797d201c681b91056529119e0b02407c7bb96a4a2c75c01fc9667232c8db9261169a8660409484881697828b8a036116ad575b5050612d75565b825195606435875260208701521693a480f35b6116b79183611fc5565b3882611693565b8580fd5b503461024a578060031936011261024a576020600080516020612ed283398151915254604051908152f35b503461024a578060031936011261024a57546040516001600160a01b039091168152602090f35b503461024a57602036600319011261024a5760206103c861061361173661217f565b600435612598565b503461024a57604036600319011261024a576117586119c2565b6024359033156117d6576001600160a01b03169182156117be576040829161177f33611aee565b85825260205220556040519081527f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b92560203392a3602060405160018152f35b60249060405190634a1406b160e11b82526004820152fd5b60405163e602df0560e01b815260048101849052602490fd5b503461024a57602036600319011261024a5760206103c86004356122e5565b503461024a578060031936011261024a576040519080600080516020612e728339815191529081549061184082611e7a565b8086529260019280841690811561083d5750600114611869576107f1866107e581880382611a34565b81529250600080516020612e528339815191525b8284106118995750505081016020016107e5826107f1386107d5565b8054602085870181019190915290930192810161187d565b503461024a578060031936011261024a5760206040517f6c0757dc3e6b28b2580c03fd9e96c274acf4f99d91fbec9b418fa1d70604ff1c8152f35b503461024a578060031936011261024a5760206103c861217f565b503461024a57602036600319011261024a5760043563ffffffff60e01b811680910361109b57602090637965db0b60e01b811490811561194d575b506040519015158152f35b6301ffc9a760e01b14905082611942565b503461024a578060031936011261024a5760206103c8612208565b6020808252825181830181905290939260005b8281106119ae57505060409293506000838284010152601f8019910116010190565b81810186015184820160400152850161198c565b600435906001600160a01b038216820361037f57565b602435906001600160a01b038216820361037f57565b67ffffffffffffffff8111611a0257604052565b634e487b7160e01b600052604160045260246000fd5b6080810190811067ffffffffffffffff821117611a0257604052565b90601f8019910116810190811067ffffffffffffffff821117611a0257604052565b67ffffffffffffffff8111611a0257601f01601f191660200190565b81601f8201121561037f57803590611a8982611a56565b92611a976040519485611a34565b8284526020838301011161037f57816000926020809301838601378301015290565b606090600319011261037f57600435906001600160a01b0390602435828116810361037f5791604435908116810361037f5790565b6001600160a01b031660009081527f52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace016020526040902090565b3360009081527fb7db2dd08fcb62d0c9e08c51941cae53c267786a0b75803fb7960902fc8ef97d602052604081205460ff1615611b615750565b6044906040519063e2517d3f60e01b82523360048301526024820152fd5b3360009081527f294f263e68a44628370ca7eca46e11f3043892ee36ff7375f356adc9c811780560205260409020547f6c0757dc3e6b28b2580c03fd9e96c274acf4f99d91fbec9b418fa1d70604ff1c9060ff1615611b615750565b80600052600080516020612ef283398151915260205260406000203360005260205260ff6040600020541615611b615750565b6001600160a01b031660008181527fb7db2dd08fcb62d0c9e08c51941cae53c267786a0b75803fb7960902fc8ef97d6020526040812054909190600080516020612ef28339815191529060ff16611ca9578280526020526040822081835260205260408220600160ff1982541617905533917f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d8180a4600190565b505090565b6001600160a01b031660008181527f294f263e68a44628370ca7eca46e11f3043892ee36ff7375f356adc9c811780560205260408120549091907f6c0757dc3e6b28b2580c03fd9e96c274acf4f99d91fbec9b418fa1d70604ff1c90600080516020612ef28339815191529060ff16611d6a578184526020526040832082845260205260408320600160ff198254161790557f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d339380a4600190565b50505090565b90600091808352600080516020612ef283398151915280602052604084209260018060a01b03169283855260205260ff60408520541615600014611d6a578184526020526040832082845260205260408320600160ff198254161790557f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d339380a4600190565b90600091808352600080516020612ef283398151915280602052604084209260018060a01b03169283855260205260ff604085205416600014611d6a57818452602052604083208284526020526040832060ff1981541690557ff6391f5c32d9c69d2a47ea670b442974b53935d1edc7fd64eb21e047a839171b339380a4600190565b90600182811c92168015611eaa575b6020831014611e9457565b634e487b7160e01b600052602260045260246000fd5b91607f1691611e89565b916001600160a01b03808416928315611f895716928315611f7057600090838252600080516020612e9283398151915280602052604083205491848310611f3d575082847fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef959360409388602097528652038282205586815220818154019055604051908152a3565b60405163391434e360e21b81526001600160a01b0391909116600482015260248101929092525060448101839052606490fd5b60405163ec442f0560e01b815260006004820152602490fd5b604051634b637e8f60e11b815260006004820152602490fd5b91908201809211611faf57565b634e487b7160e01b600052601160045260246000fd5b9190611fd083611aee565b9260018060a01b0390818316916000958387526020526040862054936000198510611fff575b50505050505050565b85851061206a575081161561205157811561203857906120226040949392611aee565b9085526020520391205538808080808080611ff6565b604051634a1406b160e11b815260048101869052602490fd5b60405163e602df0560e01b815260048101869052602490fd5b604051637dc7a0d960e11b81526001600160a01b039190911660048201526024810185905260448101869052606490fd5b60ff600080516020612f528339815191525460401c16156120b857565b604051631afcd79f60e31b8152600490fd5b90604051602081019063313ce56760e01b8252600481526040810181811067ffffffffffffffff821117611a02576040525160009384928392916001600160a01b03165afa3d15612177573d9061212082611a56565b9161212e6040519384611a34565b82523d84602084013e5b8061216b575b612148575b508190565b602081805181010312611097576020015160ff8111612143576001925060ff1690565b5060208151101561213e565b606090612138565b6001546001600160a01b031680156121f5576020600491604051928380926304336bb360e01b82525afa9081156121e9576000916121bb575090565b906020823d82116121e1575b816121d460209383611a34565b8101031261024a57505190565b3d91506121c7565b6040513d6000823e3d90fd5b50600090565b91908203918211611faf57565b6122106122aa565b80156121f5576001546000906001600160a01b03168061224957505060005b81811061223d575050600090565b612246916121fb565b90565b602060049160405192838092630c34575960e01b82525afa918215611303578092612276575b505061222f565b9091506020823d82116122a2575b8161229160209383611a34565b8101031261024a575051388061226f565b3d9150612284565b6001546001600160a01b031680156121f557602060049160405192838092625b2bfb60e41b82525afa9081156121e9576000916121bb575090565b80156121f557600080516020612ed28339815191525460018101809111611faf5761230e612208565b60018101809111611faf57612246926124aa565b80156121f557600080516020612ed28339815191525460018101809111611faf5761234b612208565b9060018201809211611faf576123628183856124aa565b918115612376576122469309151590611fa2565b634e487b7160e01b600052601260045260246000fd5b90600019818309818302918280831092039180830392146123fd57620f424090828211156123ea577fde8f6cefed634549b62c77574f722e1ac57e23f24d8fd5cb790fb65668c26139940990828211900360fa1b910360061c170290565b634e487b7160005260116020526024601cfd5b5050620f424091500490565b620f424091600019838309928083029283808610950394808603951461249c5784831115612483579082910981600003821680920460028082600302188083028203028083028203028083028203028083028203028083028203028092029003029360018380600003040190848311900302920304170290565b82634e487b71600052156003026011186020526024601cfd5b505080925015612376570490565b9091600019838309928083029283808610950394808603951461249c5784831115612483579082910981600003821680920460028082600302188083028203028083028203028083028203028083028203028083028203028092029003029360018380600003040190848311900302920304170290565b80156121f557600080516020612ed28339815191525460018101809111611faf5761254a612208565b9060018201809211611faf57612246926124aa565b600080516020612ed28339815191525460018101809111611faf57612582612208565b60018101809111611faf576123628183856124aa565b9081158015612616575b61260557620f42408082101561260e57818103818111611faf576125c68185612409565b90838314612376576125dc928509151590611fa2565b91826125e757505090565b600019830191838311611faf576125fe908361261e565b1015612609575b5090565b905090565b505050600090565b5080156125a2565b90811561265157801561260557620f4240811015612651576126409082612658565b8181101561265157612246916121fb565b5050600090565b908115801561267a575b61265157620f4240811015612605576122469161238c565b508015612662565b61268a612208565b60018101809111611faf57600080516020612ed2833981519152549060018201809211611faf57612246926124aa565b6001546001600160a01b039081169190821561260e576024602092604051948593849263402d267d60e01b84521660048301525afa60009181612703575b506122465750600090565b90916020823d821161272e575b8161271d60209383611a34565b8101031261024a57505190386126f8565b3d9150612710565b6001546001600160a01b039081169190821561260e576024602092604051948593849263631ebadb60e11b84521660048301525afa6000918161270357506122465750600090565b6001546001600160a01b039081169182156127c75760405163ce96cb7760e01b81529116600482015290602090829060249082905afa6000918161270357506122465750600090565b90915016600052600080516020612e928339815191526020526122466110c16040600020546122e5565b6001546001600160a01b0390811691821561283a57604051636c82bbbf60e11b81529116600482015290602090829060249082905afa6000918161270357506122465750600090565b90915016600052600080516020612e9283398151915260205260406000205490565b9190918315610675576001546001600160a01b03161561039757600080516020612f12833981519152546040516323b872dd60e01b60208201526001600160a01b0383811660248301523060448301526064808301869052825260a08201921667ffffffffffffffff831182841017611a02576128db92604052612b97565b6128e58484612b1e565b60408051838152602081018690526001600160a01b0385811692908416917fdcbc1c05240f31ff3ad067ef1ee35ce4997762752e3a095284754544f4c709d79190a3600080516020612f128339815191525460015460405163095ea7b360e01b60208201526001600160a01b0391821660248201819052604482018690529290911661297482606481016109d8565b60206000835182850182855af16000513d82612b02575b505015612ac9575b50506001546001600160a01b0316919050813b1561037f576000608492819560405197889687956324bd524760e21b875260018060a01b031660048701526024860152604485015260018060a01b031660648401525af180156121e957612aba575b5060018060a01b03600080516020612f12833981519152541660018060a01b036001541690604051906020600081840163095ea7b360e01b815285602486015281604486015260448552612a4885611a18565b84519082855af16000513d82612a9e575b505015612a6557505050565b6109e6612a9c936040519063095ea7b360e01b602083015260248201526000604482015260448152612a9681611a18565b82612b97565b565b909150612ab25750803b15155b3880612a59565b600114612aab565b612ac3906119ee565b386129f5565b6109e6612afa936040519063095ea7b360e01b602083015260248201526000604482015260448152612a9681611a18565b388080612993565b909150612b165750803b15155b388061298b565b600114612b0f565b6001600160a01b0316908115611f70577fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef6020600092600080516020612ed2833981519152612b6e828254611fa2565b9055848452600080516020612e92833981519152825260408420818154019055604051908152a3565b906000602091828151910182855af1156121e9576000513d612bea57506001600160a01b0381163b155b612bc85750565b604051635274afe760e01b81526001600160a01b039091166004820152602490fd5b60011415612bc1565b919082604091031261037f576020825192015190565b6001600160a01b03808416958183169493919290919082888703612d64575b505085158015612d5c575b612d0a5782600154161561039757612c4d82600095612d75565b612c5e612c5861217f565b8761261e565b9260a48160015416926040968794855197889586946341a8c09760e11b86528c6004870152169b8c60248601528d6044860152606485015260848401525af1918215612cff57907ffbde797d201c681b91056529119e0b02407c7bb96a4a2c75c01fc9667232c8db939291600092612cdf575b5082519182526020820152a4565b612cf7919250833d8511610a1f57610a0f8183611a34565b509038612cd1565b83513d6000823e3d90fd5b8195507ffbde797d201c681b91056529119e0b02407c7bb96a4a2c75c01fc9667232c8db938260409493612d4c575b50508251956000875260208701521693a4565b612d5591612d75565b3886612d39565b508115612c33565b612d6e9186611fc5565b3882612c28565b91906001600160a01b038316908115611f895781600052600080516020612e928339815191528060205260406000205494828610612e015750817fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92600095966020938688528452036040862055600080516020612ed2833981519152818154039055604051908152a3565b60405163391434e360e21b81526001600160a01b039190911660048201526024810186905260448101839052606490fd5b9081602091031261037f57516001600160a01b038116810361037f579056fe2ae08a8e29253f69ac5d979a101956ab8f8d9d7ded63fa7a83b16fc47648eab052c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0352c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0052c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0452c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace0202dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b6268000773e532dfede91f04b12a73d3d2acd361424f41f76b4fb79f090161e36b4e0046a2803e59a4de4e7a4c574b1243f25977ac4c77d5a1a4a609b5394cebb4a2aaf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00a26469706673582212206b04aacb6071178abbb5598d9b09a66257eb8f90e8273cefa80a5594ee88a40364736f6c63430008140033","optimization_enabled":true,"verified_twin_address_hash":null,"is_verified":true,"compiler_settings":{"evmVersion":"paris","libraries":{},"optimizer":{"enabled":true,"runs":200},"outputSelection":{"*":{"":["*"],"*":["*"]}},"viaIR":true},"optimization_runs":200,"sourcify_repo_url":null,"decoded_constructor_args":null,"compiler_version":"v0.8.20+commit.a1b79de6","is_verified_via_verifier_alliance":false,"verified_at":"2026-01-24T11:06:35.413318Z","implementations":[],"proxy_type":null,"external_libraries":[],"creation_bytecode":"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","name":"DStakeTokenV2","is_blueprint":false,"license_type":"none","is_fully_verified":true,"is_verified_via_eth_bytecode_db":false,"language":"solidity","evm_version":"paris","can_be_visualized_via_sol2uml":true,"is_verified_via_sourcify":false,"additional_sources":[{"file_path":"@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/AccessControl.sol)\n\npragma solidity ^0.8.20;\n\nimport {IAccessControl} from \"@openzeppelin/contracts/access/IAccessControl.sol\";\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {ERC165Upgradeable} from \"../utils/introspection/ERC165Upgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that allows children to implement role-based access\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\n * members except through off-chain means by accessing the contract event logs. Some\n * applications may benefit from on-chain enumerability, for those cases see\n * {AccessControlEnumerable}.\n *\n * Roles are referred to by their `bytes32` identifier. These should be exposed\n * in the external API and be unique. The best way to achieve this is by\n * using `public constant` hash digests:\n *\n * ```solidity\n * bytes32 public constant MY_ROLE = keccak256(\"MY_ROLE\");\n * ```\n *\n * Roles can be used to represent a set of permissions. To restrict access to a\n * function call, use {hasRole}:\n *\n * ```solidity\n * function foo() public {\n * require(hasRole(MY_ROLE, msg.sender));\n * ...\n * }\n * ```\n *\n * Roles can be granted and revoked dynamically via the {grantRole} and\n * {revokeRole} functions. Each role has an associated admin role, and only\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\n *\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\n * that only accounts with this role will be able to grant or revoke other\n * roles. More complex role relationships can be created by using\n * {_setRoleAdmin}.\n *\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\n * grant and revoke this role. Extra precautions should be taken to secure\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\n * to enforce additional security measures for this role.\n */\nabstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControl, ERC165Upgradeable {\n struct RoleData {\n mapping(address account => bool) hasRole;\n bytes32 adminRole;\n }\n\n bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\n\n\n /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl\n struct AccessControlStorage {\n mapping(bytes32 role => RoleData) _roles;\n }\n\n // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.AccessControl\")) - 1)) & ~bytes32(uint256(0xff))\n bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;\n\n function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {\n assembly {\n $.slot := AccessControlStorageLocation\n }\n }\n\n /**\n * @dev Modifier that checks that an account has a specific role. Reverts\n * with an {AccessControlUnauthorizedAccount} error including the required role.\n */\n modifier onlyRole(bytes32 role) {\n _checkRole(role);\n _;\n }\n\n function __AccessControl_init() internal onlyInitializing {\n }\n\n function __AccessControl_init_unchained() internal onlyInitializing {\n }\n /// @inheritdoc IERC165\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);\n }\n\n /**\n * @dev Returns `true` if `account` has been granted `role`.\n */\n function hasRole(bytes32 role, address account) public view virtual returns (bool) {\n AccessControlStorage storage $ = _getAccessControlStorage();\n return $._roles[role].hasRole[account];\n }\n\n /**\n * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`\n * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.\n */\n function _checkRole(bytes32 role) internal view virtual {\n _checkRole(role, _msgSender());\n }\n\n /**\n * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`\n * is missing `role`.\n */\n function _checkRole(bytes32 role, address account) internal view virtual {\n if (!hasRole(role, account)) {\n revert AccessControlUnauthorizedAccount(account, role);\n }\n }\n\n /**\n * @dev Returns the admin role that controls `role`. See {grantRole} and\n * {revokeRole}.\n *\n * To change a role's admin, use {_setRoleAdmin}.\n */\n function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {\n AccessControlStorage storage $ = _getAccessControlStorage();\n return $._roles[role].adminRole;\n }\n\n /**\n * @dev Grants `role` to `account`.\n *\n * If `account` had not been already granted `role`, emits a {RoleGranted}\n * event.\n *\n * Requirements:\n *\n * - the caller must have ``role``'s admin role.\n *\n * May emit a {RoleGranted} event.\n */\n function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n _grantRole(role, account);\n }\n\n /**\n * @dev Revokes `role` from `account`.\n *\n * If `account` had been granted `role`, emits a {RoleRevoked} event.\n *\n * Requirements:\n *\n * - the caller must have ``role``'s admin role.\n *\n * May emit a {RoleRevoked} event.\n */\n function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n _revokeRole(role, account);\n }\n\n /**\n * @dev Revokes `role` from the calling account.\n *\n * Roles are often managed via {grantRole} and {revokeRole}: this function's\n * purpose is to provide a mechanism for accounts to lose their privileges\n * if they are compromised (such as when a trusted device is misplaced).\n *\n * If the calling account had been revoked `role`, emits a {RoleRevoked}\n * event.\n *\n * Requirements:\n *\n * - the caller must be `callerConfirmation`.\n *\n * May emit a {RoleRevoked} event.\n */\n function renounceRole(bytes32 role, address callerConfirmation) public virtual {\n if (callerConfirmation != _msgSender()) {\n revert AccessControlBadConfirmation();\n }\n\n _revokeRole(role, callerConfirmation);\n }\n\n /**\n * @dev Sets `adminRole` as ``role``'s admin role.\n *\n * Emits a {RoleAdminChanged} event.\n */\n function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\n AccessControlStorage storage $ = _getAccessControlStorage();\n bytes32 previousAdminRole = getRoleAdmin(role);\n $._roles[role].adminRole = adminRole;\n emit RoleAdminChanged(role, previousAdminRole, adminRole);\n }\n\n /**\n * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.\n *\n * Internal function without access restriction.\n *\n * May emit a {RoleGranted} event.\n */\n function _grantRole(bytes32 role, address account) internal virtual returns (bool) {\n AccessControlStorage storage $ = _getAccessControlStorage();\n if (!hasRole(role, account)) {\n $._roles[role].hasRole[account] = true;\n emit RoleGranted(role, account, _msgSender());\n return true;\n } else {\n return false;\n }\n }\n\n /**\n * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.\n *\n * Internal function without access restriction.\n *\n * May emit a {RoleRevoked} event.\n */\n function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {\n AccessControlStorage storage $ = _getAccessControlStorage();\n if (hasRole(role, account)) {\n $._roles[role].hasRole[account] = false;\n emit RoleRevoked(role, account, _msgSender());\n return true;\n } else {\n return false;\n }\n }\n}\n"},{"file_path":"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n * function initialize() initializer public {\n * __ERC20_init(\"MyToken\", \"MTK\");\n * }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n * function initializeV2() reinitializer(2) public {\n * __ERC20Permit_init(\"MyToken\");\n * }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n * _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n /**\n * @dev Storage of the initializable contract.\n *\n * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions\n * when using with upgradeable contracts.\n *\n * @custom:storage-location erc7201:openzeppelin.storage.Initializable\n */\n struct InitializableStorage {\n /**\n * @dev Indicates that the contract has been initialized.\n */\n uint64 _initialized;\n /**\n * @dev Indicates that the contract is in the process of being initialized.\n */\n bool _initializing;\n }\n\n // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Initializable\")) - 1)) & ~bytes32(uint256(0xff))\n bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;\n\n /**\n * @dev The contract is already initialized.\n */\n error InvalidInitialization();\n\n /**\n * @dev The contract is not initializing.\n */\n error NotInitializing();\n\n /**\n * @dev Triggered when the contract has been initialized or reinitialized.\n */\n event Initialized(uint64 version);\n\n /**\n * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n * `onlyInitializing` functions can be used to initialize parent contracts.\n *\n * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any\n * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in\n * production.\n *\n * Emits an {Initialized} event.\n */\n modifier initializer() {\n // solhint-disable-next-line var-name-mixedcase\n InitializableStorage storage $ = _getInitializableStorage();\n\n // Cache values to avoid duplicated sloads\n bool isTopLevelCall = !$._initializing;\n uint64 initialized = $._initialized;\n\n // Allowed calls:\n // - initialSetup: the contract is not in the initializing state and no previous version was\n // initialized\n // - construction: the contract is initialized at version 1 (no reinitialization) and the\n // current contract is just being deployed\n bool initialSetup = initialized == 0 && isTopLevelCall;\n bool construction = initialized == 1 && address(this).code.length == 0;\n\n if (!initialSetup && !construction) {\n revert InvalidInitialization();\n }\n $._initialized = 1;\n if (isTopLevelCall) {\n $._initializing = true;\n }\n _;\n if (isTopLevelCall) {\n $._initializing = false;\n emit Initialized(1);\n }\n }\n\n /**\n * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n * used to initialize parent contracts.\n *\n * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n * are added through upgrades and that require initialization.\n *\n * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n * cannot be nested. If one is invoked in the context of another, execution will revert.\n *\n * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n * a contract, executing them in the right order is up to the developer or operator.\n *\n * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.\n *\n * Emits an {Initialized} event.\n */\n modifier reinitializer(uint64 version) {\n // solhint-disable-next-line var-name-mixedcase\n InitializableStorage storage $ = _getInitializableStorage();\n\n if ($._initializing || $._initialized >= version) {\n revert InvalidInitialization();\n }\n $._initialized = version;\n $._initializing = true;\n _;\n $._initializing = false;\n emit Initialized(version);\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} and {reinitializer} modifiers, directly or indirectly.\n */\n modifier onlyInitializing() {\n _checkInitializing();\n _;\n }\n\n /**\n * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.\n */\n function _checkInitializing() internal view virtual {\n if (!_isInitializing()) {\n revert NotInitializing();\n }\n }\n\n /**\n * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n * through proxies.\n *\n * Emits an {Initialized} event the first time it is successfully executed.\n */\n function _disableInitializers() internal virtual {\n // solhint-disable-next-line var-name-mixedcase\n InitializableStorage storage $ = _getInitializableStorage();\n\n if ($._initializing) {\n revert InvalidInitialization();\n }\n if ($._initialized != type(uint64).max) {\n $._initialized = type(uint64).max;\n emit Initialized(type(uint64).max);\n }\n }\n\n /**\n * @dev Returns the highest version that has been initialized. See {reinitializer}.\n */\n function _getInitializedVersion() internal view returns (uint64) {\n return _getInitializableStorage()._initialized;\n }\n\n /**\n * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n */\n function _isInitializing() internal view returns (bool) {\n return _getInitializableStorage()._initializing;\n }\n\n /**\n * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.\n *\n * NOTE: Consider following the ERC-7201 formula to derive storage locations.\n */\n function _initializableStorageSlot() internal pure virtual returns (bytes32) {\n return INITIALIZABLE_STORAGE;\n }\n\n /**\n * @dev Returns a pointer to the storage namespace.\n */\n // solhint-disable-next-line var-name-mixedcase\n function _getInitializableStorage() private pure returns (InitializableStorage storage $) {\n bytes32 slot = _initializableStorageSlot();\n assembly {\n $.slot := slot\n }\n }\n}\n"},{"file_path":"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {ContextUpgradeable} from \"../../utils/ContextUpgradeable.sol\";\nimport {IERC20Errors} from \"@openzeppelin/contracts/interfaces/draft-IERC6093.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {\n /// @custom:storage-location erc7201:openzeppelin.storage.ERC20\n struct ERC20Storage {\n mapping(address account => uint256) _balances;\n\n mapping(address account => mapping(address spender => uint256)) _allowances;\n\n uint256 _totalSupply;\n\n string _name;\n string _symbol;\n }\n\n // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC20\")) - 1)) & ~bytes32(uint256(0xff))\n bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;\n\n function _getERC20Storage() private pure returns (ERC20Storage storage $) {\n assembly {\n $.slot := ERC20StorageLocation\n }\n }\n\n /**\n * @dev Sets the values for {name} and {symbol}.\n *\n * Both values are immutable: they can only be set once during construction.\n */\n function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {\n __ERC20_init_unchained(name_, symbol_);\n }\n\n function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n ERC20Storage storage $ = _getERC20Storage();\n $._name = name_;\n $._symbol = symbol_;\n }\n\n /**\n * @dev Returns the name of the token.\n */\n function name() public view virtual returns (string memory) {\n ERC20Storage storage $ = _getERC20Storage();\n return $._name;\n }\n\n /**\n * @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n */\n function symbol() public view virtual returns (string memory) {\n ERC20Storage storage $ = _getERC20Storage();\n return $._symbol;\n }\n\n /**\n * @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n *\n * Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the default value returned by this function, unless\n * it's overridden.\n *\n * NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n */\n function decimals() public view virtual returns (uint8) {\n return 18;\n }\n\n /// @inheritdoc IERC20\n function totalSupply() public view virtual returns (uint256) {\n ERC20Storage storage $ = _getERC20Storage();\n return $._totalSupply;\n }\n\n /// @inheritdoc IERC20\n function balanceOf(address account) public view virtual returns (uint256) {\n ERC20Storage storage $ = _getERC20Storage();\n return $._balances[account];\n }\n\n /**\n * @dev See {IERC20-transfer}.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - the caller must have a balance of at least `value`.\n */\n function transfer(address to, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _transfer(owner, to, value);\n return true;\n }\n\n /// @inheritdoc IERC20\n function allowance(address owner, address spender) public view virtual returns (uint256) {\n ERC20Storage storage $ = _getERC20Storage();\n return $._allowances[owner][spender];\n }\n\n /**\n * @dev See {IERC20-approve}.\n *\n * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n * `transferFrom`. This is semantically equivalent to an infinite approval.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function approve(address spender, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, value);\n return true;\n }\n\n /**\n * @dev See {IERC20-transferFrom}.\n *\n * Skips emitting an {Approval} event indicating an allowance update. This is not\n * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n *\n * NOTE: Does not update the allowance if the current allowance\n * is the maximum `uint256`.\n *\n * Requirements:\n *\n * - `from` and `to` cannot be the zero address.\n * - `from` must have a balance of at least `value`.\n * - the caller must have allowance for ``from``'s tokens of at least\n * `value`.\n */\n function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n address spender = _msgSender();\n _spendAllowance(from, spender, value);\n _transfer(from, to, value);\n return true;\n }\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to`.\n *\n * This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n *\n * Emits a {Transfer} event.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _transfer(address from, address to, uint256 value) internal {\n if (from == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n if (to == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(from, to, value);\n }\n\n /**\n * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n * this function.\n *\n * Emits a {Transfer} event.\n */\n function _update(address from, address to, uint256 value) internal virtual {\n ERC20Storage storage $ = _getERC20Storage();\n if (from == address(0)) {\n // Overflow check required: The rest of the code assumes that totalSupply never overflows\n $._totalSupply += value;\n } else {\n uint256 fromBalance = $._balances[from];\n if (fromBalance < value) {\n revert ERC20InsufficientBalance(from, fromBalance, value);\n }\n unchecked {\n // Overflow not possible: value <= fromBalance <= totalSupply.\n $._balances[from] = fromBalance - value;\n }\n }\n\n if (to == address(0)) {\n unchecked {\n // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n $._totalSupply -= value;\n }\n } else {\n unchecked {\n // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n $._balances[to] += value;\n }\n }\n\n emit Transfer(from, to, value);\n }\n\n /**\n * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n * Relies on the `_update` mechanism\n *\n * Emits a {Transfer} event with `from` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _mint(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(address(0), account, value);\n }\n\n /**\n * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n * Relies on the `_update` mechanism.\n *\n * Emits a {Transfer} event with `to` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead\n */\n function _burn(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n _update(account, address(0), value);\n }\n\n /**\n * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.\n *\n * This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n *\n * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n */\n function _approve(address owner, address spender, uint256 value) internal {\n _approve(owner, spender, value, true);\n }\n\n /**\n * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n *\n * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n * `Approval` event during `transferFrom` operations.\n *\n * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n * true using the following override:\n *\n * ```solidity\n * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n * super._approve(owner, spender, value, true);\n * }\n * ```\n *\n * Requirements are the same as {_approve}.\n */\n function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n ERC20Storage storage $ = _getERC20Storage();\n if (owner == address(0)) {\n revert ERC20InvalidApprover(address(0));\n }\n if (spender == address(0)) {\n revert ERC20InvalidSpender(address(0));\n }\n $._allowances[owner][spender] = value;\n if (emitEvent) {\n emit Approval(owner, spender, value);\n }\n }\n\n /**\n * @dev Updates `owner`'s allowance for `spender` based on spent `value`.\n *\n * Does not update the allowance value in case of infinite allowance.\n * Revert if not enough allowance is available.\n *\n * Does not emit an {Approval} event.\n */\n function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n uint256 currentAllowance = allowance(owner, spender);\n if (currentAllowance < type(uint256).max) {\n if (currentAllowance < value) {\n revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n }\n unchecked {\n _approve(owner, spender, currentAllowance - value, false);\n }\n }\n }\n}\n"},{"file_path":"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/ERC4626.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {IERC4626} from \"@openzeppelin/contracts/interfaces/IERC4626.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {Initializable} from \"../../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the ERC-4626 \"Tokenized Vault Standard\" as defined in\n * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].\n *\n * This extension allows the minting and burning of \"shares\" (represented using the ERC-20 inheritance) in exchange for\n * underlying \"assets\" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends\n * the ERC-20 standard. Any additional extensions included along it would affect the \"shares\" token represented by this\n * contract and not the \"assets\" token which is an independent contract.\n *\n * [CAUTION]\n * ====\n * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning\n * with a \"donation\" to the vault that inflates the price of a share. This is variously known as a donation or inflation\n * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial\n * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may\n * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by\n * verifying the amount received is as expected, using a wrapper that performs these checks such as\n * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].\n *\n * Since v4.9, this implementation introduces configurable virtual assets and shares to help developers mitigate that risk.\n * The `_decimalsOffset()` corresponds to an offset in the decimal representation between the underlying asset's decimals\n * and the vault decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which\n * itself determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default\n * offset (0) makes it non-profitable even if an attacker is able to capture value from multiple user deposits, as a result\n * of the value being captured by the virtual shares (out of the attacker's donation) matching the attacker's expected gains.\n * With a larger offset, the attack becomes orders of magnitude more expensive than it is profitable. More details about the\n * underlying math can be found xref:ROOT:erc4626.adoc#inflation-attack[here].\n *\n * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued\n * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets\n * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience\n * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the\n * `_convertToShares` and `_convertToAssets` functions.\n *\n * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].\n * ====\n */\nabstract contract ERC4626Upgradeable is Initializable, ERC20Upgradeable, IERC4626 {\n using Math for uint256;\n\n /// @custom:storage-location erc7201:openzeppelin.storage.ERC4626\n struct ERC4626Storage {\n IERC20 _asset;\n uint8 _underlyingDecimals;\n }\n\n // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC4626\")) - 1)) & ~bytes32(uint256(0xff))\n bytes32 private constant ERC4626StorageLocation = 0x0773e532dfede91f04b12a73d3d2acd361424f41f76b4fb79f090161e36b4e00;\n\n function _getERC4626Storage() private pure returns (ERC4626Storage storage $) {\n assembly {\n $.slot := ERC4626StorageLocation\n }\n }\n\n /**\n * @dev Attempted to deposit more assets than the max amount for `receiver`.\n */\n error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);\n\n /**\n * @dev Attempted to mint more shares than the max amount for `receiver`.\n */\n error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);\n\n /**\n * @dev Attempted to withdraw more assets than the max amount for `receiver`.\n */\n error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);\n\n /**\n * @dev Attempted to redeem more shares than the max amount for `receiver`.\n */\n error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);\n\n /**\n * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC-20 or ERC-777).\n */\n function __ERC4626_init(IERC20 asset_) internal onlyInitializing {\n __ERC4626_init_unchained(asset_);\n }\n\n function __ERC4626_init_unchained(IERC20 asset_) internal onlyInitializing {\n ERC4626Storage storage $ = _getERC4626Storage();\n (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);\n $._underlyingDecimals = success ? assetDecimals : 18;\n $._asset = asset_;\n }\n\n /**\n * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.\n */\n function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool ok, uint8 assetDecimals) {\n (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(\n abi.encodeCall(IERC20Metadata.decimals, ())\n );\n if (success && encodedDecimals.length >= 32) {\n uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));\n if (returnedDecimals <= type(uint8).max) {\n return (true, uint8(returnedDecimals));\n }\n }\n return (false, 0);\n }\n\n /**\n * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This\n * \"original\" value is cached during construction of the vault contract. If this read operation fails (e.g., the\n * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.\n *\n * See {IERC20Metadata-decimals}.\n */\n function decimals() public view virtual override(IERC20Metadata, ERC20Upgradeable) returns (uint8) {\n ERC4626Storage storage $ = _getERC4626Storage();\n return $._underlyingDecimals + _decimalsOffset();\n }\n\n /// @inheritdoc IERC4626\n function asset() public view virtual returns (address) {\n ERC4626Storage storage $ = _getERC4626Storage();\n return address($._asset);\n }\n\n /// @inheritdoc IERC4626\n function totalAssets() public view virtual returns (uint256) {\n return IERC20(asset()).balanceOf(address(this));\n }\n\n /// @inheritdoc IERC4626\n function convertToShares(uint256 assets) public view virtual returns (uint256) {\n return _convertToShares(assets, Math.Rounding.Floor);\n }\n\n /// @inheritdoc IERC4626\n function convertToAssets(uint256 shares) public view virtual returns (uint256) {\n return _convertToAssets(shares, Math.Rounding.Floor);\n }\n\n /// @inheritdoc IERC4626\n function maxDeposit(address) public view virtual returns (uint256) {\n return type(uint256).max;\n }\n\n /// @inheritdoc IERC4626\n function maxMint(address) public view virtual returns (uint256) {\n return type(uint256).max;\n }\n\n /// @inheritdoc IERC4626\n function maxWithdraw(address owner) public view virtual returns (uint256) {\n return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);\n }\n\n /// @inheritdoc IERC4626\n function maxRedeem(address owner) public view virtual returns (uint256) {\n return balanceOf(owner);\n }\n\n /// @inheritdoc IERC4626\n function previewDeposit(uint256 assets) public view virtual returns (uint256) {\n return _convertToShares(assets, Math.Rounding.Floor);\n }\n\n /// @inheritdoc IERC4626\n function previewMint(uint256 shares) public view virtual returns (uint256) {\n return _convertToAssets(shares, Math.Rounding.Ceil);\n }\n\n /// @inheritdoc IERC4626\n function previewWithdraw(uint256 assets) public view virtual returns (uint256) {\n return _convertToShares(assets, Math.Rounding.Ceil);\n }\n\n /// @inheritdoc IERC4626\n function previewRedeem(uint256 shares) public view virtual returns (uint256) {\n return _convertToAssets(shares, Math.Rounding.Floor);\n }\n\n /// @inheritdoc IERC4626\n function deposit(uint256 assets, address receiver) public virtual returns (uint256) {\n uint256 maxAssets = maxDeposit(receiver);\n if (assets > maxAssets) {\n revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);\n }\n\n uint256 shares = previewDeposit(assets);\n _deposit(_msgSender(), receiver, assets, shares);\n\n return shares;\n }\n\n /// @inheritdoc IERC4626\n function mint(uint256 shares, address receiver) public virtual returns (uint256) {\n uint256 maxShares = maxMint(receiver);\n if (shares > maxShares) {\n revert ERC4626ExceededMaxMint(receiver, shares, maxShares);\n }\n\n uint256 assets = previewMint(shares);\n _deposit(_msgSender(), receiver, assets, shares);\n\n return assets;\n }\n\n /// @inheritdoc IERC4626\n function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {\n uint256 maxAssets = maxWithdraw(owner);\n if (assets > maxAssets) {\n revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);\n }\n\n uint256 shares = previewWithdraw(assets);\n _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n return shares;\n }\n\n /// @inheritdoc IERC4626\n function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {\n uint256 maxShares = maxRedeem(owner);\n if (shares > maxShares) {\n revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);\n }\n\n uint256 assets = previewRedeem(shares);\n _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n return assets;\n }\n\n /**\n * @dev Internal conversion function (from assets to shares) with support for rounding direction.\n */\n function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {\n return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);\n }\n\n /**\n * @dev Internal conversion function (from shares to assets) with support for rounding direction.\n */\n function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {\n return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);\n }\n\n /**\n * @dev Deposit/mint common workflow.\n */\n function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {\n // If asset() is ERC-777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the\n // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,\n // calls the vault, which is assumed not malicious.\n //\n // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the\n // assets are transferred and before the shares are minted, which is a valid state.\n // slither-disable-next-line reentrancy-no-eth\n SafeERC20.safeTransferFrom(IERC20(asset()), caller, address(this), assets);\n _mint(receiver, shares);\n\n emit Deposit(caller, receiver, assets, shares);\n }\n\n /**\n * @dev Withdraw/redeem common workflow.\n */\n function _withdraw(\n address caller,\n address receiver,\n address owner,\n uint256 assets,\n uint256 shares\n ) internal virtual {\n if (caller != owner) {\n _spendAllowance(owner, caller, shares);\n }\n\n // If asset() is ERC-777, `transfer` can trigger a reentrancy AFTER the transfer happens through the\n // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,\n // calls the vault, which is assumed not malicious.\n //\n // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the\n // shares are burned and after the assets are transferred, which is a valid state.\n _burn(owner, shares);\n SafeERC20.safeTransfer(IERC20(asset()), receiver, assets);\n\n emit Withdraw(caller, receiver, owner, assets, shares);\n }\n\n function _decimalsOffset() internal view virtual returns (uint8) {\n return 0;\n }\n}\n"},{"file_path":"@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n function __Context_init() internal onlyInitializing {\n }\n\n function __Context_init_unchained() internal onlyInitializing {\n }\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n function _contextSuffixLength() internal view virtual returns (uint256) {\n return 0;\n }\n}\n"},{"file_path":"@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165 {\n function __ERC165_init() internal onlyInitializing {\n }\n\n function __ERC165_init_unchained() internal onlyInitializing {\n }\n /// @inheritdoc IERC165\n function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n return interfaceId == type(IERC165).interfaceId;\n }\n}\n"},{"file_path":"@openzeppelin/contracts/access/IAccessControl.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/IAccessControl.sol)\n\npragma solidity >=0.8.4;\n\n/**\n * @dev External interface of AccessControl declared to support ERC-165 detection.\n */\ninterface IAccessControl {\n /**\n * @dev The `account` is missing a role.\n */\n error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);\n\n /**\n * @dev The caller of a function is not the expected one.\n *\n * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.\n */\n error AccessControlBadConfirmation();\n\n /**\n * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n *\n * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n * {RoleAdminChanged} not being emitted to signal this.\n */\n event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n /**\n * @dev Emitted when `account` is granted `role`.\n *\n * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).\n * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.\n */\n event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n /**\n * @dev Emitted when `account` is revoked `role`.\n *\n * `sender` is the account that originated the contract call:\n * - if using `revokeRole`, it is the admin role bearer\n * - if using `renounceRole`, it is the role bearer (i.e. `account`)\n */\n event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n /**\n * @dev Returns `true` if `account` has been granted `role`.\n */\n function hasRole(bytes32 role, address account) external view returns (bool);\n\n /**\n * @dev Returns the admin role that controls `role`. See {grantRole} and\n * {revokeRole}.\n *\n * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n */\n function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n /**\n * @dev Grants `role` to `account`.\n *\n * If `account` had not been already granted `role`, emits a {RoleGranted}\n * event.\n *\n * Requirements:\n *\n * - the caller must have ``role``'s admin role.\n */\n function grantRole(bytes32 role, address account) external;\n\n /**\n * @dev Revokes `role` from `account`.\n *\n * If `account` had been granted `role`, emits a {RoleRevoked} event.\n *\n * Requirements:\n *\n * - the caller must have ``role``'s admin role.\n */\n function revokeRole(bytes32 role, address account) external;\n\n /**\n * @dev Revokes `role` from the calling account.\n *\n * Roles are often managed via {grantRole} and {revokeRole}: this function's\n * purpose is to provide a mechanism for accounts to lose their privileges\n * if they are compromised (such as when a trusted device is misplaced).\n *\n * If the calling account had been granted `role`, emits a {RoleRevoked}\n * event.\n *\n * Requirements:\n *\n * - the caller must be `callerConfirmation`.\n */\n function renounceRole(bytes32 role, address callerConfirmation) external;\n}\n"},{"file_path":"@openzeppelin/contracts/interfaces/IERC1363.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n /*\n * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n * 0xb0202a11 ===\n * bytes4(keccak256('transferAndCall(address,uint256)')) ^\n * bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n * bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n * bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n * bytes4(keccak256('approveAndCall(address,uint256)')) ^\n * bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n */\n\n /**\n * @dev Moves a `value` amount of tokens from the caller's account to `to`\n * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n * @param to The address which you want to transfer to.\n * @param value The amount of tokens to be transferred.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function transferAndCall(address to, uint256 value) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from the caller's account to `to`\n * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n * @param to The address which you want to transfer to.\n * @param value The amount of tokens to be transferred.\n * @param data Additional data with no specified format, sent in call to `to`.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n * @param from The address which you want to send tokens from.\n * @param to The address which you want to transfer to.\n * @param value The amount of tokens to be transferred.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n * @param from The address which you want to send tokens from.\n * @param to The address which you want to transfer to.\n * @param value The amount of tokens to be transferred.\n * @param data Additional data with no specified format, sent in call to `to`.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n /**\n * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n * @param spender The address which will spend the funds.\n * @param value The amount of tokens to be spent.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function approveAndCall(address spender, uint256 value) external returns (bool);\n\n /**\n * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n * @param spender The address which will spend the funds.\n * @param value The amount of tokens to be spent.\n * @param data Additional data with no specified format, sent in call to `spender`.\n * @return A boolean value indicating whether the operation succeeded unless throwing.\n */\n function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"},{"file_path":"@openzeppelin/contracts/interfaces/IERC165.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"},{"file_path":"@openzeppelin/contracts/interfaces/IERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"},{"file_path":"@openzeppelin/contracts/interfaces/IERC4626.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC4626.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"../token/ERC20/extensions/IERC20Metadata.sol\";\n\n/**\n * @dev Interface of the ERC-4626 \"Tokenized Vault Standard\", as defined in\n * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].\n */\ninterface IERC4626 is IERC20, IERC20Metadata {\n event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);\n\n event Withdraw(\n address indexed sender,\n address indexed receiver,\n address indexed owner,\n uint256 assets,\n uint256 shares\n );\n\n /**\n * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.\n *\n * - MUST be an ERC-20 token contract.\n * - MUST NOT revert.\n */\n function asset() external view returns (address assetTokenAddress);\n\n /**\n * @dev Returns the total amount of the underlying asset that is “managed” by Vault.\n *\n * - SHOULD include any compounding that occurs from yield.\n * - MUST be inclusive of any fees that are charged against assets in the Vault.\n * - MUST NOT revert.\n */\n function totalAssets() external view returns (uint256 totalManagedAssets);\n\n /**\n * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal\n * scenario where all the conditions are met.\n *\n * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.\n * - MUST NOT show any variations depending on the caller.\n * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.\n * - MUST NOT revert.\n *\n * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the\n * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and\n * from.\n */\n function convertToShares(uint256 assets) external view returns (uint256 shares);\n\n /**\n * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal\n * scenario where all the conditions are met.\n *\n * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.\n * - MUST NOT show any variations depending on the caller.\n * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.\n * - MUST NOT revert.\n *\n * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the\n * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and\n * from.\n */\n function convertToAssets(uint256 shares) external view returns (uint256 assets);\n\n /**\n * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,\n * through a deposit call.\n *\n * - MUST return a limited value if receiver is subject to some deposit limit.\n * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.\n * - MUST NOT revert.\n */\n function maxDeposit(address receiver) external view returns (uint256 maxAssets);\n\n /**\n * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given\n * current on-chain conditions.\n *\n * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit\n * call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called\n * in the same transaction.\n * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the\n * deposit would be accepted, regardless if the user has enough tokens approved, etc.\n * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.\n * - MUST NOT revert.\n *\n * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in\n * share price or some other type of condition, meaning the depositor will lose assets by depositing.\n */\n function previewDeposit(uint256 assets) external view returns (uint256 shares);\n\n /**\n * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.\n *\n * - MUST emit the Deposit event.\n * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n * deposit execution, and are accounted for during deposit.\n * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not\n * approving enough underlying tokens to the Vault contract, etc).\n *\n * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.\n */\n function deposit(uint256 assets, address receiver) external returns (uint256 shares);\n\n /**\n * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.\n * - MUST return a limited value if receiver is subject to some mint limit.\n * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.\n * - MUST NOT revert.\n */\n function maxMint(address receiver) external view returns (uint256 maxShares);\n\n /**\n * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given\n * current on-chain conditions.\n *\n * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call\n * in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the\n * same transaction.\n * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint\n * would be accepted, regardless if the user has enough tokens approved, etc.\n * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.\n * - MUST NOT revert.\n *\n * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in\n * share price or some other type of condition, meaning the depositor will lose assets by minting.\n */\n function previewMint(uint256 shares) external view returns (uint256 assets);\n\n /**\n * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.\n *\n * - MUST emit the Deposit event.\n * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint\n * execution, and are accounted for during mint.\n * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not\n * approving enough underlying tokens to the Vault contract, etc).\n *\n * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.\n */\n function mint(uint256 shares, address receiver) external returns (uint256 assets);\n\n /**\n * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the\n * Vault, through a withdraw call.\n *\n * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.\n * - MUST NOT revert.\n */\n function maxWithdraw(address owner) external view returns (uint256 maxAssets);\n\n /**\n * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,\n * given current on-chain conditions.\n *\n * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw\n * call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if\n * called\n * in the same transaction.\n * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though\n * the withdrawal would be accepted, regardless if the user has enough shares, etc.\n * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.\n * - MUST NOT revert.\n *\n * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in\n * share price or some other type of condition, meaning the depositor will lose assets by depositing.\n */\n function previewWithdraw(uint256 assets) external view returns (uint256 shares);\n\n /**\n * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.\n *\n * - MUST emit the Withdraw event.\n * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n * withdraw execution, and are accounted for during withdraw.\n * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner\n * not having enough shares, etc).\n *\n * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.\n * Those methods should be performed separately.\n */\n function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);\n\n /**\n * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,\n * through a redeem call.\n *\n * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.\n * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.\n * - MUST NOT revert.\n */\n function maxRedeem(address owner) external view returns (uint256 maxShares);\n\n /**\n * @dev Allows an on-chain or off-chain user to simulate the effects of their redemption at the current block,\n * given current on-chain conditions.\n *\n * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call\n * in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the\n * same transaction.\n * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the\n * redemption would be accepted, regardless if the user has enough shares, etc.\n * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.\n * - MUST NOT revert.\n *\n * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in\n * share price or some other type of condition, meaning the depositor will lose assets by redeeming.\n */\n function previewRedeem(uint256 shares) external view returns (uint256 assets);\n\n /**\n * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.\n *\n * - MUST emit the Withdraw event.\n * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n * redeem execution, and are accounted for during redeem.\n * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner\n * not having enough shares, etc).\n *\n * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.\n * Those methods should be performed separately.\n */\n function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);\n}\n"},{"file_path":"@openzeppelin/contracts/interfaces/draft-IERC6093.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC6093.sol)\npragma solidity >=0.8.4;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC20InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC20InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n * @param allowance Amount of tokens a `spender` is allowed to operate with.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC20InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n /**\n * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.\n * Used in balance queries.\n * @param owner Address of the current owner of a token.\n */\n error ERC721InvalidOwner(address owner);\n\n /**\n * @dev Indicates a `tokenId` whose `owner` is the zero address.\n * @param tokenId Identifier number of a token.\n */\n error ERC721NonexistentToken(uint256 tokenId);\n\n /**\n * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param tokenId Identifier number of a token.\n * @param owner Address of the current owner of a token.\n */\n error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC721InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC721InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param tokenId Identifier number of a token.\n */\n error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC721InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n * @param tokenId Identifier number of a token.\n */\n error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC1155InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC1155InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param owner Address of the current owner of a token.\n */\n error ERC1155MissingApprovalForAll(address operator, address owner);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC1155InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC1155InvalidOperator(address operator);\n\n /**\n * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n * Used in batch transfers.\n * @param idsLength Length of the array of token identifiers\n * @param valuesLength Length of the array of token amounts\n */\n error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"},{"file_path":"@openzeppelin/contracts/token/ERC20/IERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the value of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the value of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 value) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n * caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 value) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to` using the\n * allowance mechanism. `value` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},{"file_path":"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n /**\n * @dev Returns the name of the token.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the symbol of the token.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n"},{"file_path":"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n /**\n * @dev An operation with an ERC-20 token failed.\n */\n error SafeERC20FailedOperation(address token);\n\n /**\n * @dev Indicates a failed `decreaseAllowance` request.\n */\n error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n /**\n * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n * non-reverting calls are assumed to be successful.\n */\n function safeTransfer(IERC20 token, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n }\n\n /**\n * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n */\n function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n }\n\n /**\n * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n */\n function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));\n }\n\n /**\n * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n */\n function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n }\n\n /**\n * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n * non-reverting calls are assumed to be successful.\n *\n * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n */\n function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n uint256 oldAllowance = token.allowance(address(this), spender);\n forceApprove(token, spender, oldAllowance + value);\n }\n\n /**\n * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n * value, non-reverting calls are assumed to be successful.\n *\n * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n */\n function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n unchecked {\n uint256 currentAllowance = token.allowance(address(this), spender);\n if (currentAllowance < requestedDecrease) {\n revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n }\n forceApprove(token, spender, currentAllowance - requestedDecrease);\n }\n }\n\n /**\n * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n * to be set to zero before setting it to a non-zero value, such as USDT.\n *\n * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n * set here.\n */\n function forceApprove(IERC20 token, address spender, uint256 value) internal {\n bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n if (!_callOptionalReturnBool(token, approvalCall)) {\n _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n _callOptionalReturn(token, approvalCall);\n }\n }\n\n /**\n * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n * targeting contracts.\n *\n * Reverts if the returned value is other than `true`.\n */\n function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n if (to.code.length == 0) {\n safeTransfer(token, to, value);\n } else if (!token.transferAndCall(to, value, data)) {\n revert SafeERC20FailedOperation(address(token));\n }\n }\n\n /**\n * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n * targeting contracts.\n *\n * Reverts if the returned value is other than `true`.\n */\n function transferFromAndCallRelaxed(\n IERC1363 token,\n address from,\n address to,\n uint256 value,\n bytes memory data\n ) internal {\n if (to.code.length == 0) {\n safeTransferFrom(token, from, to, value);\n } else if (!token.transferFromAndCall(from, to, value, data)) {\n revert SafeERC20FailedOperation(address(token));\n }\n }\n\n /**\n * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n * targeting contracts.\n *\n * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n * once without retrying, and relies on the returned value to be true.\n *\n * Reverts if the returned value is other than `true`.\n */\n function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n if (to.code.length == 0) {\n forceApprove(token, to, value);\n } else if (!token.approveAndCall(to, value, data)) {\n revert SafeERC20FailedOperation(address(token));\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n *\n * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n uint256 returnSize;\n uint256 returnValue;\n assembly (\"memory-safe\") {\n let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n // bubble errors\n if iszero(success) {\n let ptr := mload(0x40)\n returndatacopy(ptr, 0, returndatasize())\n revert(ptr, returndatasize())\n }\n returnSize := returndatasize()\n returnValue := mload(0)\n }\n\n if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {\n revert SafeERC20FailedOperation(address(token));\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n *\n * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.\n */\n function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n bool success;\n uint256 returnSize;\n uint256 returnValue;\n assembly (\"memory-safe\") {\n success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n returnSize := returndatasize()\n returnValue := mload(0)\n }\n return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);\n }\n}\n"},{"file_path":"@openzeppelin/contracts/utils/Panic.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Helper library for emitting standardized panic codes.\n *\n * ```solidity\n * contract Example {\n * using Panic for uint256;\n *\n * // Use any of the declared internal constants\n * function foo() { Panic.GENERIC.panic(); }\n *\n * // Alternatively\n * function foo() { Panic.panic(Panic.GENERIC); }\n * }\n * ```\n *\n * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].\n *\n * _Available since v5.1._\n */\n// slither-disable-next-line unused-state\nlibrary Panic {\n /// @dev generic / unspecified error\n uint256 internal constant GENERIC = 0x00;\n /// @dev used by the assert() builtin\n uint256 internal constant ASSERT = 0x01;\n /// @dev arithmetic underflow or overflow\n uint256 internal constant UNDER_OVERFLOW = 0x11;\n /// @dev division or modulo by zero\n uint256 internal constant DIVISION_BY_ZERO = 0x12;\n /// @dev enum conversion error\n uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;\n /// @dev invalid encoding in storage\n uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;\n /// @dev empty array pop\n uint256 internal constant EMPTY_ARRAY_POP = 0x31;\n /// @dev array out of bounds access\n uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;\n /// @dev resource error (too large allocation or too large array)\n uint256 internal constant RESOURCE_ERROR = 0x41;\n /// @dev calling invalid internal function\n uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;\n\n /// @dev Reverts with a panic code. Recommended to use with\n /// the internal constants with predefined codes.\n function panic(uint256 code) internal pure {\n assembly (\"memory-safe\") {\n mstore(0x00, 0x4e487b71)\n mstore(0x20, code)\n revert(0x1c, 0x24)\n }\n }\n}\n"},{"file_path":"@openzeppelin/contracts/utils/introspection/IERC165.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30 000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},{"file_path":"@openzeppelin/contracts/utils/math/Math.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\nimport {Panic} from \"../Panic.sol\";\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n enum Rounding {\n Floor, // Toward negative infinity\n Ceil, // Toward positive infinity\n Trunc, // Toward zero\n Expand // Away from zero\n }\n\n /**\n * @dev Return the 512-bit addition of two uint256.\n *\n * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.\n */\n function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n assembly (\"memory-safe\") {\n low := add(a, b)\n high := lt(low, a)\n }\n }\n\n /**\n * @dev Return the 512-bit multiplication of two uint256.\n *\n * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.\n */\n function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use\n // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n // variables such that product = high * 2²⁵⁶ + low.\n assembly (\"memory-safe\") {\n let mm := mulmod(a, b, not(0))\n low := mul(a, b)\n high := sub(sub(mm, low), lt(mm, low))\n }\n }\n\n /**\n * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).\n */\n function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n unchecked {\n uint256 c = a + b;\n success = c >= a;\n result = c * SafeCast.toUint(success);\n }\n }\n\n /**\n * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).\n */\n function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n unchecked {\n uint256 c = a - b;\n success = c <= a;\n result = c * SafeCast.toUint(success);\n }\n }\n\n /**\n * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).\n */\n function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n unchecked {\n uint256 c = a * b;\n assembly (\"memory-safe\") {\n // Only true when the multiplication doesn't overflow\n // (c / a == b) || (a == 0)\n success := or(eq(div(c, a), b), iszero(a))\n }\n // equivalent to: success ? c : 0\n result = c * SafeCast.toUint(success);\n }\n }\n\n /**\n * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).\n */\n function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n unchecked {\n success = b > 0;\n assembly (\"memory-safe\") {\n // The `DIV` opcode returns zero when the denominator is 0.\n result := div(a, b)\n }\n }\n }\n\n /**\n * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).\n */\n function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n unchecked {\n success = b > 0;\n assembly (\"memory-safe\") {\n // The `MOD` opcode returns zero when the denominator is 0.\n result := mod(a, b)\n }\n }\n }\n\n /**\n * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.\n */\n function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {\n (bool success, uint256 result) = tryAdd(a, b);\n return ternary(success, result, type(uint256).max);\n }\n\n /**\n * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.\n */\n function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {\n (, uint256 result) = trySub(a, b);\n return result;\n }\n\n /**\n * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.\n */\n function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {\n (bool success, uint256 result) = tryMul(a, b);\n return ternary(success, result, type(uint256).max);\n }\n\n /**\n * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n *\n * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n * one branch when needed, making this function more expensive.\n */\n function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {\n unchecked {\n // branchless ternary works because:\n // b ^ (a ^ b) == a\n // b ^ 0 == b\n return b ^ ((a ^ b) * SafeCast.toUint(condition));\n }\n }\n\n /**\n * @dev Returns the largest of two numbers.\n */\n function max(uint256 a, uint256 b) internal pure returns (uint256) {\n return ternary(a > b, a, b);\n }\n\n /**\n * @dev Returns the smallest of two numbers.\n */\n function min(uint256 a, uint256 b) internal pure returns (uint256) {\n return ternary(a < b, a, b);\n }\n\n /**\n * @dev Returns the average of two numbers. The result is rounded towards\n * zero.\n */\n function average(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b) / 2 can overflow.\n return (a & b) + (a ^ b) / 2;\n }\n\n /**\n * @dev Returns the ceiling of the division of two numbers.\n *\n * This differs from standard division with `/` in that it rounds towards infinity instead\n * of rounding towards zero.\n */\n function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n if (b == 0) {\n // Guarantee the same behavior as in a regular Solidity division.\n Panic.panic(Panic.DIVISION_BY_ZERO);\n }\n\n // The following calculation ensures accurate ceiling division without overflow.\n // Since a is non-zero, (a - 1) / b will not overflow.\n // The largest possible result occurs when (a - 1) / b is type(uint256).max,\n // but the largest value we can obtain is type(uint256).max - 1, which happens\n // when a = type(uint256).max and b = 1.\n unchecked {\n return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);\n }\n }\n\n /**\n * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n * denominator == 0.\n *\n * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n * Uniswap Labs also under MIT license.\n */\n function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n unchecked {\n (uint256 high, uint256 low) = mul512(x, y);\n\n // Handle non-overflow cases, 256 by 256 division.\n if (high == 0) {\n // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n // The surrounding unchecked block does not change this fact.\n // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n return low / denominator;\n }\n\n // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.\n if (denominator <= high) {\n Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));\n }\n\n ///////////////////////////////////////////////\n // 512 by 256 division.\n ///////////////////////////////////////////////\n\n // Make division exact by subtracting the remainder from [high low].\n uint256 remainder;\n assembly (\"memory-safe\") {\n // Compute remainder using mulmod.\n remainder := mulmod(x, y, denominator)\n\n // Subtract 256 bit number from 512 bit number.\n high := sub(high, gt(remainder, low))\n low := sub(low, remainder)\n }\n\n // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n uint256 twos = denominator & (0 - denominator);\n assembly (\"memory-safe\") {\n // Divide denominator by twos.\n denominator := div(denominator, twos)\n\n // Divide [high low] by twos.\n low := div(low, twos)\n\n // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.\n twos := add(div(sub(0, twos), twos), 1)\n }\n\n // Shift in bits from high into low.\n low |= high * twos;\n\n // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such\n // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for\n // four bits. That is, denominator * inv ≡ 1 mod 2⁴.\n uint256 inverse = (3 * denominator) ^ 2;\n\n // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n // works in modular arithmetic, doubling the correct bits in each step.\n inverse *= 2 - denominator * inverse; // inverse mod 2⁸\n inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶\n inverse *= 2 - denominator * inverse; // inverse mod 2³²\n inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴\n inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸\n inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶\n\n // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is\n // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high\n // is no longer required.\n result = low * inverse;\n return result;\n }\n }\n\n /**\n * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.\n */\n function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);\n }\n\n /**\n * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.\n */\n function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {\n unchecked {\n (uint256 high, uint256 low) = mul512(x, y);\n if (high >= 1 << n) {\n Panic.panic(Panic.UNDER_OVERFLOW);\n }\n return (high << (256 - n)) | (low >> n);\n }\n }\n\n /**\n * @dev Calculates x * y >> n with full precision, following the selected rounding direction.\n */\n function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {\n return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);\n }\n\n /**\n * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.\n *\n * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.\n * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.\n *\n * If the input value is not inversible, 0 is returned.\n *\n * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the\n * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.\n */\n function invMod(uint256 a, uint256 n) internal pure returns (uint256) {\n unchecked {\n if (n == 0) return 0;\n\n // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)\n // Used to compute integers x and y such that: ax + ny = gcd(a, n).\n // When the gcd is 1, then the inverse of a modulo n exists and it's x.\n // ax + ny = 1\n // ax = 1 + (-y)n\n // ax ≡ 1 (mod n) # x is the inverse of a modulo n\n\n // If the remainder is 0 the gcd is n right away.\n uint256 remainder = a % n;\n uint256 gcd = n;\n\n // Therefore the initial coefficients are:\n // ax + ny = gcd(a, n) = n\n // 0a + 1n = n\n int256 x = 0;\n int256 y = 1;\n\n while (remainder != 0) {\n uint256 quotient = gcd / remainder;\n\n (gcd, remainder) = (\n // The old remainder is the next gcd to try.\n remainder,\n // Compute the next remainder.\n // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd\n // where gcd is at most n (capped to type(uint256).max)\n gcd - remainder * quotient\n );\n\n (x, y) = (\n // Increment the coefficient of a.\n y,\n // Decrement the coefficient of n.\n // Can overflow, but the result is casted to uint256 so that the\n // next value of y is \"wrapped around\" to a value between 0 and n - 1.\n x - y * int256(quotient)\n );\n }\n\n if (gcd != 1) return 0; // No inverse exists.\n return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.\n }\n }\n\n /**\n * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.\n *\n * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is\n * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that\n * `a**(p-2)` is the modular multiplicative inverse of a in Fp.\n *\n * NOTE: this function does NOT check that `p` is a prime greater than `2`.\n */\n function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {\n unchecked {\n return Math.modExp(a, p - 2, p);\n }\n }\n\n /**\n * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)\n *\n * Requirements:\n * - modulus can't be zero\n * - underlying staticcall to precompile must succeed\n *\n * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make\n * sure the chain you're using it on supports the precompiled contract for modular exponentiation\n * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,\n * the underlying function will succeed given the lack of a revert, but the result may be incorrectly\n * interpreted as 0.\n */\n function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {\n (bool success, uint256 result) = tryModExp(b, e, m);\n if (!success) {\n Panic.panic(Panic.DIVISION_BY_ZERO);\n }\n return result;\n }\n\n /**\n * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).\n * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying\n * to operate modulo 0 or if the underlying precompile reverted.\n *\n * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain\n * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in\n * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack\n * of a revert, but the result may be incorrectly interpreted as 0.\n */\n function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {\n if (m == 0) return (false, 0);\n assembly (\"memory-safe\") {\n let ptr := mload(0x40)\n // | Offset | Content | Content (Hex) |\n // |-----------|------------|--------------------------------------------------------------------|\n // | 0x00:0x1f | size of b | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n // | 0x20:0x3f | size of e | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n // | 0x40:0x5f | size of m | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n // | 0x60:0x7f | value of b | 0x<.............................................................b> |\n // | 0x80:0x9f | value of e | 0x<.............................................................e> |\n // | 0xa0:0xbf | value of m | 0x<.............................................................m> |\n mstore(ptr, 0x20)\n mstore(add(ptr, 0x20), 0x20)\n mstore(add(ptr, 0x40), 0x20)\n mstore(add(ptr, 0x60), b)\n mstore(add(ptr, 0x80), e)\n mstore(add(ptr, 0xa0), m)\n\n // Given the result < m, it's guaranteed to fit in 32 bytes,\n // so we can use the memory scratch space located at offset 0.\n success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)\n result := mload(0x00)\n }\n }\n\n /**\n * @dev Variant of {modExp} that supports inputs of arbitrary length.\n */\n function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {\n (bool success, bytes memory result) = tryModExp(b, e, m);\n if (!success) {\n Panic.panic(Panic.DIVISION_BY_ZERO);\n }\n return result;\n }\n\n /**\n * @dev Variant of {tryModExp} that supports inputs of arbitrary length.\n */\n function tryModExp(\n bytes memory b,\n bytes memory e,\n bytes memory m\n ) internal view returns (bool success, bytes memory result) {\n if (_zeroBytes(m)) return (false, new bytes(0));\n\n uint256 mLen = m.length;\n\n // Encode call args in result and move the free memory pointer\n result = abi.encodePacked(b.length, e.length, mLen, b, e, m);\n\n assembly (\"memory-safe\") {\n let dataPtr := add(result, 0x20)\n // Write result on top of args to avoid allocating extra memory.\n success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)\n // Overwrite the length.\n // result.length > returndatasize() is guaranteed because returndatasize() == m.length\n mstore(result, mLen)\n // Set the memory pointer after the returned data.\n mstore(0x40, add(dataPtr, mLen))\n }\n }\n\n /**\n * @dev Returns whether the provided byte array is zero.\n */\n function _zeroBytes(bytes memory byteArray) private pure returns (bool) {\n for (uint256 i = 0; i < byteArray.length; ++i) {\n if (byteArray[i] != 0) {\n return false;\n }\n }\n return true;\n }\n\n /**\n * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n * towards zero.\n *\n * This method is based on Newton's method for computing square roots; the algorithm is restricted to only\n * using integer operations.\n */\n function sqrt(uint256 a) internal pure returns (uint256) {\n unchecked {\n // Take care of easy edge cases when a == 0 or a == 1\n if (a <= 1) {\n return a;\n }\n\n // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a\n // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between\n // the current value as `ε_n = | x_n - sqrt(a) |`.\n //\n // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root\n // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is\n // bigger than any uint256.\n //\n // By noticing that\n // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`\n // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar\n // to the msb function.\n uint256 aa = a;\n uint256 xn = 1;\n\n if (aa >= (1 << 128)) {\n aa >>= 128;\n xn <<= 64;\n }\n if (aa >= (1 << 64)) {\n aa >>= 64;\n xn <<= 32;\n }\n if (aa >= (1 << 32)) {\n aa >>= 32;\n xn <<= 16;\n }\n if (aa >= (1 << 16)) {\n aa >>= 16;\n xn <<= 8;\n }\n if (aa >= (1 << 8)) {\n aa >>= 8;\n xn <<= 4;\n }\n if (aa >= (1 << 4)) {\n aa >>= 4;\n xn <<= 2;\n }\n if (aa >= (1 << 2)) {\n xn <<= 1;\n }\n\n // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).\n //\n // We can refine our estimation by noticing that the middle of that interval minimizes the error.\n // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).\n // This is going to be our x_0 (and ε_0)\n xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)\n\n // From here, Newton's method give us:\n // x_{n+1} = (x_n + a / x_n) / 2\n //\n // One should note that:\n // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a\n // = ((x_n² + a) / (2 * x_n))² - a\n // = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a\n // = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)\n // = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)\n // = (x_n² - a)² / (2 * x_n)²\n // = ((x_n² - a) / (2 * x_n))²\n // ≥ 0\n // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n\n //\n // This gives us the proof of quadratic convergence of the sequence:\n // ε_{n+1} = | x_{n+1} - sqrt(a) |\n // = | (x_n + a / x_n) / 2 - sqrt(a) |\n // = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |\n // = | (x_n - sqrt(a))² / (2 * x_n) |\n // = | ε_n² / (2 * x_n) |\n // = ε_n² / | (2 * x_n) |\n //\n // For the first iteration, we have a special case where x_0 is known:\n // ε_1 = ε_0² / | (2 * x_0) |\n // ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))\n // ≤ 2**(2*e-4) / (3 * 2**(e-1))\n // ≤ 2**(e-3) / 3\n // ≤ 2**(e-3-log2(3))\n // ≤ 2**(e-4.5)\n //\n // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:\n // ε_{n+1} = ε_n² / | (2 * x_n) |\n // ≤ (2**(e-k))² / (2 * 2**(e-1))\n // ≤ 2**(2*e-2*k) / 2**e\n // ≤ 2**(e-2*k)\n xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5) -- special case, see above\n xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9) -- general case with k = 4.5\n xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18) -- general case with k = 9\n xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36) -- general case with k = 18\n xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72) -- general case with k = 36\n xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144) -- general case with k = 72\n\n // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision\n // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either\n // sqrt(a) or sqrt(a) + 1.\n return xn - SafeCast.toUint(xn > a / xn);\n }\n }\n\n /**\n * @dev Calculates sqrt(a), following the selected rounding direction.\n */\n function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = sqrt(a);\n return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);\n }\n }\n\n /**\n * @dev Return the log in base 2 of a positive value rounded towards zero.\n * Returns 0 if given 0.\n */\n function log2(uint256 x) internal pure returns (uint256 r) {\n // If value has upper 128 bits set, log2 result is at least 128\n r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n // If upper 64 bits of 128-bit half set, add 64 to result\n r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n // If upper 32 bits of 64-bit half set, add 32 to result\n r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n // If upper 16 bits of 32-bit half set, add 16 to result\n r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n // If upper 8 bits of 16-bit half set, add 8 to result\n r |= SafeCast.toUint((x >> r) > 0xff) << 3;\n // If upper 4 bits of 8-bit half set, add 4 to result\n r |= SafeCast.toUint((x >> r) > 0xf) << 2;\n\n // Shifts value right by the current result and use it as an index into this lookup table:\n //\n // | x (4 bits) | index | table[index] = MSB position |\n // |------------|---------|-----------------------------|\n // | 0000 | 0 | table[0] = 0 |\n // | 0001 | 1 | table[1] = 0 |\n // | 0010 | 2 | table[2] = 1 |\n // | 0011 | 3 | table[3] = 1 |\n // | 0100 | 4 | table[4] = 2 |\n // | 0101 | 5 | table[5] = 2 |\n // | 0110 | 6 | table[6] = 2 |\n // | 0111 | 7 | table[7] = 2 |\n // | 1000 | 8 | table[8] = 3 |\n // | 1001 | 9 | table[9] = 3 |\n // | 1010 | 10 | table[10] = 3 |\n // | 1011 | 11 | table[11] = 3 |\n // | 1100 | 12 | table[12] = 3 |\n // | 1101 | 13 | table[13] = 3 |\n // | 1110 | 14 | table[14] = 3 |\n // | 1111 | 15 | table[15] = 3 |\n //\n // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.\n assembly (\"memory-safe\") {\n r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))\n }\n }\n\n /**\n * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log2(value);\n return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);\n }\n }\n\n /**\n * @dev Return the log in base 10 of a positive value rounded towards zero.\n * Returns 0 if given 0.\n */\n function log10(uint256 value) internal pure returns (uint256) {\n uint256 result = 0;\n unchecked {\n if (value >= 10 ** 64) {\n value /= 10 ** 64;\n result += 64;\n }\n if (value >= 10 ** 32) {\n value /= 10 ** 32;\n result += 32;\n }\n if (value >= 10 ** 16) {\n value /= 10 ** 16;\n result += 16;\n }\n if (value >= 10 ** 8) {\n value /= 10 ** 8;\n result += 8;\n }\n if (value >= 10 ** 4) {\n value /= 10 ** 4;\n result += 4;\n }\n if (value >= 10 ** 2) {\n value /= 10 ** 2;\n result += 2;\n }\n if (value >= 10 ** 1) {\n result += 1;\n }\n }\n return result;\n }\n\n /**\n * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log10(value);\n return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);\n }\n }\n\n /**\n * @dev Return the log in base 256 of a positive value rounded towards zero.\n * Returns 0 if given 0.\n *\n * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n */\n function log256(uint256 x) internal pure returns (uint256 r) {\n // If value has upper 128 bits set, log2 result is at least 128\n r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n // If upper 64 bits of 128-bit half set, add 64 to result\n r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n // If upper 32 bits of 64-bit half set, add 32 to result\n r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n // If upper 16 bits of 32-bit half set, add 16 to result\n r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8\n return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);\n }\n\n /**\n * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log256(value);\n return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);\n }\n }\n\n /**\n * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n */\n function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n return uint8(rounding) % 2 == 1;\n }\n}\n"},{"file_path":"@openzeppelin/contracts/utils/math/SafeCast.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n /**\n * @dev Value doesn't fit in an uint of `bits` size.\n */\n error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n /**\n * @dev An int value doesn't fit in an uint of `bits` size.\n */\n error SafeCastOverflowedIntToUint(int256 value);\n\n /**\n * @dev Value doesn't fit in an int of `bits` size.\n */\n error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n /**\n * @dev An uint value doesn't fit in an int of `bits` size.\n */\n error SafeCastOverflowedUintToInt(uint256 value);\n\n /**\n * @dev Returns the downcasted uint248 from uint256, reverting on\n * overflow (when the input is greater than largest uint248).\n *\n * Counterpart to Solidity's `uint248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n */\n function toUint248(uint256 value) internal pure returns (uint248) {\n if (value > type(uint248).max) {\n revert SafeCastOverflowedUintDowncast(248, value);\n }\n return uint248(value);\n }\n\n /**\n * @dev Returns the downcasted uint240 from uint256, reverting on\n * overflow (when the input is greater than largest uint240).\n *\n * Counterpart to Solidity's `uint240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n */\n function toUint240(uint256 value) internal pure returns (uint240) {\n if (value > type(uint240).max) {\n revert SafeCastOverflowedUintDowncast(240, value);\n }\n return uint240(value);\n }\n\n /**\n * @dev Returns the downcasted uint232 from uint256, reverting on\n * overflow (when the input is greater than largest uint232).\n *\n * Counterpart to Solidity's `uint232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n */\n function toUint232(uint256 value) internal pure returns (uint232) {\n if (value > type(uint232).max) {\n revert SafeCastOverflowedUintDowncast(232, value);\n }\n return uint232(value);\n }\n\n /**\n * @dev Returns the downcasted uint224 from uint256, reverting on\n * overflow (when the input is greater than largest uint224).\n *\n * Counterpart to Solidity's `uint224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n */\n function toUint224(uint256 value) internal pure returns (uint224) {\n if (value > type(uint224).max) {\n revert SafeCastOverflowedUintDowncast(224, value);\n }\n return uint224(value);\n }\n\n /**\n * @dev Returns the downcasted uint216 from uint256, reverting on\n * overflow (when the input is greater than largest uint216).\n *\n * Counterpart to Solidity's `uint216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n */\n function toUint216(uint256 value) internal pure returns (uint216) {\n if (value > type(uint216).max) {\n revert SafeCastOverflowedUintDowncast(216, value);\n }\n return uint216(value);\n }\n\n /**\n * @dev Returns the downcasted uint208 from uint256, reverting on\n * overflow (when the input is greater than largest uint208).\n *\n * Counterpart to Solidity's `uint208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n */\n function toUint208(uint256 value) internal pure returns (uint208) {\n if (value > type(uint208).max) {\n revert SafeCastOverflowedUintDowncast(208, value);\n }\n return uint208(value);\n }\n\n /**\n * @dev Returns the downcasted uint200 from uint256, reverting on\n * overflow (when the input is greater than largest uint200).\n *\n * Counterpart to Solidity's `uint200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n */\n function toUint200(uint256 value) internal pure returns (uint200) {\n if (value > type(uint200).max) {\n revert SafeCastOverflowedUintDowncast(200, value);\n }\n return uint200(value);\n }\n\n /**\n * @dev Returns the downcasted uint192 from uint256, reverting on\n * overflow (when the input is greater than largest uint192).\n *\n * Counterpart to Solidity's `uint192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n */\n function toUint192(uint256 value) internal pure returns (uint192) {\n if (value > type(uint192).max) {\n revert SafeCastOverflowedUintDowncast(192, value);\n }\n return uint192(value);\n }\n\n /**\n * @dev Returns the downcasted uint184 from uint256, reverting on\n * overflow (when the input is greater than largest uint184).\n *\n * Counterpart to Solidity's `uint184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n */\n function toUint184(uint256 value) internal pure returns (uint184) {\n if (value > type(uint184).max) {\n revert SafeCastOverflowedUintDowncast(184, value);\n }\n return uint184(value);\n }\n\n /**\n * @dev Returns the downcasted uint176 from uint256, reverting on\n * overflow (when the input is greater than largest uint176).\n *\n * Counterpart to Solidity's `uint176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n */\n function toUint176(uint256 value) internal pure returns (uint176) {\n if (value > type(uint176).max) {\n revert SafeCastOverflowedUintDowncast(176, value);\n }\n return uint176(value);\n }\n\n /**\n * @dev Returns the downcasted uint168 from uint256, reverting on\n * overflow (when the input is greater than largest uint168).\n *\n * Counterpart to Solidity's `uint168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n */\n function toUint168(uint256 value) internal pure returns (uint168) {\n if (value > type(uint168).max) {\n revert SafeCastOverflowedUintDowncast(168, value);\n }\n return uint168(value);\n }\n\n /**\n * @dev Returns the downcasted uint160 from uint256, reverting on\n * overflow (when the input is greater than largest uint160).\n *\n * Counterpart to Solidity's `uint160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n */\n function toUint160(uint256 value) internal pure returns (uint160) {\n if (value > type(uint160).max) {\n revert SafeCastOverflowedUintDowncast(160, value);\n }\n return uint160(value);\n }\n\n /**\n * @dev Returns the downcasted uint152 from uint256, reverting on\n * overflow (when the input is greater than largest uint152).\n *\n * Counterpart to Solidity's `uint152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n */\n function toUint152(uint256 value) internal pure returns (uint152) {\n if (value > type(uint152).max) {\n revert SafeCastOverflowedUintDowncast(152, value);\n }\n return uint152(value);\n }\n\n /**\n * @dev Returns the downcasted uint144 from uint256, reverting on\n * overflow (when the input is greater than largest uint144).\n *\n * Counterpart to Solidity's `uint144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n */\n function toUint144(uint256 value) internal pure returns (uint144) {\n if (value > type(uint144).max) {\n revert SafeCastOverflowedUintDowncast(144, value);\n }\n return uint144(value);\n }\n\n /**\n * @dev Returns the downcasted uint136 from uint256, reverting on\n * overflow (when the input is greater than largest uint136).\n *\n * Counterpart to Solidity's `uint136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n */\n function toUint136(uint256 value) internal pure returns (uint136) {\n if (value > type(uint136).max) {\n revert SafeCastOverflowedUintDowncast(136, value);\n }\n return uint136(value);\n }\n\n /**\n * @dev Returns the downcasted uint128 from uint256, reverting on\n * overflow (when the input is greater than largest uint128).\n *\n * Counterpart to Solidity's `uint128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n */\n function toUint128(uint256 value) internal pure returns (uint128) {\n if (value > type(uint128).max) {\n revert SafeCastOverflowedUintDowncast(128, value);\n }\n return uint128(value);\n }\n\n /**\n * @dev Returns the downcasted uint120 from uint256, reverting on\n * overflow (when the input is greater than largest uint120).\n *\n * Counterpart to Solidity's `uint120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n */\n function toUint120(uint256 value) internal pure returns (uint120) {\n if (value > type(uint120).max) {\n revert SafeCastOverflowedUintDowncast(120, value);\n }\n return uint120(value);\n }\n\n /**\n * @dev Returns the downcasted uint112 from uint256, reverting on\n * overflow (when the input is greater than largest uint112).\n *\n * Counterpart to Solidity's `uint112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n */\n function toUint112(uint256 value) internal pure returns (uint112) {\n if (value > type(uint112).max) {\n revert SafeCastOverflowedUintDowncast(112, value);\n }\n return uint112(value);\n }\n\n /**\n * @dev Returns the downcasted uint104 from uint256, reverting on\n * overflow (when the input is greater than largest uint104).\n *\n * Counterpart to Solidity's `uint104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n */\n function toUint104(uint256 value) internal pure returns (uint104) {\n if (value > type(uint104).max) {\n revert SafeCastOverflowedUintDowncast(104, value);\n }\n return uint104(value);\n }\n\n /**\n * @dev Returns the downcasted uint96 from uint256, reverting on\n * overflow (when the input is greater than largest uint96).\n *\n * Counterpart to Solidity's `uint96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n */\n function toUint96(uint256 value) internal pure returns (uint96) {\n if (value > type(uint96).max) {\n revert SafeCastOverflowedUintDowncast(96, value);\n }\n return uint96(value);\n }\n\n /**\n * @dev Returns the downcasted uint88 from uint256, reverting on\n * overflow (when the input is greater than largest uint88).\n *\n * Counterpart to Solidity's `uint88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n */\n function toUint88(uint256 value) internal pure returns (uint88) {\n if (value > type(uint88).max) {\n revert SafeCastOverflowedUintDowncast(88, value);\n }\n return uint88(value);\n }\n\n /**\n * @dev Returns the downcasted uint80 from uint256, reverting on\n * overflow (when the input is greater than largest uint80).\n *\n * Counterpart to Solidity's `uint80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n */\n function toUint80(uint256 value) internal pure returns (uint80) {\n if (value > type(uint80).max) {\n revert SafeCastOverflowedUintDowncast(80, value);\n }\n return uint80(value);\n }\n\n /**\n * @dev Returns the downcasted uint72 from uint256, reverting on\n * overflow (when the input is greater than largest uint72).\n *\n * Counterpart to Solidity's `uint72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n */\n function toUint72(uint256 value) internal pure returns (uint72) {\n if (value > type(uint72).max) {\n revert SafeCastOverflowedUintDowncast(72, value);\n }\n return uint72(value);\n }\n\n /**\n * @dev Returns the downcasted uint64 from uint256, reverting on\n * overflow (when the input is greater than largest uint64).\n *\n * Counterpart to Solidity's `uint64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n */\n function toUint64(uint256 value) internal pure returns (uint64) {\n if (value > type(uint64).max) {\n revert SafeCastOverflowedUintDowncast(64, value);\n }\n return uint64(value);\n }\n\n /**\n * @dev Returns the downcasted uint56 from uint256, reverting on\n * overflow (when the input is greater than largest uint56).\n *\n * Counterpart to Solidity's `uint56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n */\n function toUint56(uint256 value) internal pure returns (uint56) {\n if (value > type(uint56).max) {\n revert SafeCastOverflowedUintDowncast(56, value);\n }\n return uint56(value);\n }\n\n /**\n * @dev Returns the downcasted uint48 from uint256, reverting on\n * overflow (when the input is greater than largest uint48).\n *\n * Counterpart to Solidity's `uint48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n */\n function toUint48(uint256 value) internal pure returns (uint48) {\n if (value > type(uint48).max) {\n revert SafeCastOverflowedUintDowncast(48, value);\n }\n return uint48(value);\n }\n\n /**\n * @dev Returns the downcasted uint40 from uint256, reverting on\n * overflow (when the input is greater than largest uint40).\n *\n * Counterpart to Solidity's `uint40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n */\n function toUint40(uint256 value) internal pure returns (uint40) {\n if (value > type(uint40).max) {\n revert SafeCastOverflowedUintDowncast(40, value);\n }\n return uint40(value);\n }\n\n /**\n * @dev Returns the downcasted uint32 from uint256, reverting on\n * overflow (when the input is greater than largest uint32).\n *\n * Counterpart to Solidity's `uint32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n */\n function toUint32(uint256 value) internal pure returns (uint32) {\n if (value > type(uint32).max) {\n revert SafeCastOverflowedUintDowncast(32, value);\n }\n return uint32(value);\n }\n\n /**\n * @dev Returns the downcasted uint24 from uint256, reverting on\n * overflow (when the input is greater than largest uint24).\n *\n * Counterpart to Solidity's `uint24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n */\n function toUint24(uint256 value) internal pure returns (uint24) {\n if (value > type(uint24).max) {\n revert SafeCastOverflowedUintDowncast(24, value);\n }\n return uint24(value);\n }\n\n /**\n * @dev Returns the downcasted uint16 from uint256, reverting on\n * overflow (when the input is greater than largest uint16).\n *\n * Counterpart to Solidity's `uint16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n */\n function toUint16(uint256 value) internal pure returns (uint16) {\n if (value > type(uint16).max) {\n revert SafeCastOverflowedUintDowncast(16, value);\n }\n return uint16(value);\n }\n\n /**\n * @dev Returns the downcasted uint8 from uint256, reverting on\n * overflow (when the input is greater than largest uint8).\n *\n * Counterpart to Solidity's `uint8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n */\n function toUint8(uint256 value) internal pure returns (uint8) {\n if (value > type(uint8).max) {\n revert SafeCastOverflowedUintDowncast(8, value);\n }\n return uint8(value);\n }\n\n /**\n * @dev Converts a signed int256 into an unsigned uint256.\n *\n * Requirements:\n *\n * - input must be greater than or equal to 0.\n */\n function toUint256(int256 value) internal pure returns (uint256) {\n if (value < 0) {\n revert SafeCastOverflowedIntToUint(value);\n }\n return uint256(value);\n }\n\n /**\n * @dev Returns the downcasted int248 from int256, reverting on\n * overflow (when the input is less than smallest int248 or\n * greater than largest int248).\n *\n * Counterpart to Solidity's `int248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n */\n function toInt248(int256 value) internal pure returns (int248 downcasted) {\n downcasted = int248(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(248, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int240 from int256, reverting on\n * overflow (when the input is less than smallest int240 or\n * greater than largest int240).\n *\n * Counterpart to Solidity's `int240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n */\n function toInt240(int256 value) internal pure returns (int240 downcasted) {\n downcasted = int240(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(240, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int232 from int256, reverting on\n * overflow (when the input is less than smallest int232 or\n * greater than largest int232).\n *\n * Counterpart to Solidity's `int232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n */\n function toInt232(int256 value) internal pure returns (int232 downcasted) {\n downcasted = int232(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(232, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int224 from int256, reverting on\n * overflow (when the input is less than smallest int224 or\n * greater than largest int224).\n *\n * Counterpart to Solidity's `int224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n */\n function toInt224(int256 value) internal pure returns (int224 downcasted) {\n downcasted = int224(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(224, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int216 from int256, reverting on\n * overflow (when the input is less than smallest int216 or\n * greater than largest int216).\n *\n * Counterpart to Solidity's `int216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n */\n function toInt216(int256 value) internal pure returns (int216 downcasted) {\n downcasted = int216(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(216, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int208 from int256, reverting on\n * overflow (when the input is less than smallest int208 or\n * greater than largest int208).\n *\n * Counterpart to Solidity's `int208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n */\n function toInt208(int256 value) internal pure returns (int208 downcasted) {\n downcasted = int208(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(208, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int200 from int256, reverting on\n * overflow (when the input is less than smallest int200 or\n * greater than largest int200).\n *\n * Counterpart to Solidity's `int200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n */\n function toInt200(int256 value) internal pure returns (int200 downcasted) {\n downcasted = int200(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(200, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int192 from int256, reverting on\n * overflow (when the input is less than smallest int192 or\n * greater than largest int192).\n *\n * Counterpart to Solidity's `int192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n */\n function toInt192(int256 value) internal pure returns (int192 downcasted) {\n downcasted = int192(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(192, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int184 from int256, reverting on\n * overflow (when the input is less than smallest int184 or\n * greater than largest int184).\n *\n * Counterpart to Solidity's `int184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n */\n function toInt184(int256 value) internal pure returns (int184 downcasted) {\n downcasted = int184(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(184, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int176 from int256, reverting on\n * overflow (when the input is less than smallest int176 or\n * greater than largest int176).\n *\n * Counterpart to Solidity's `int176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n */\n function toInt176(int256 value) internal pure returns (int176 downcasted) {\n downcasted = int176(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(176, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int168 from int256, reverting on\n * overflow (when the input is less than smallest int168 or\n * greater than largest int168).\n *\n * Counterpart to Solidity's `int168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n */\n function toInt168(int256 value) internal pure returns (int168 downcasted) {\n downcasted = int168(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(168, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int160 from int256, reverting on\n * overflow (when the input is less than smallest int160 or\n * greater than largest int160).\n *\n * Counterpart to Solidity's `int160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n */\n function toInt160(int256 value) internal pure returns (int160 downcasted) {\n downcasted = int160(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(160, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int152 from int256, reverting on\n * overflow (when the input is less than smallest int152 or\n * greater than largest int152).\n *\n * Counterpart to Solidity's `int152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n */\n function toInt152(int256 value) internal pure returns (int152 downcasted) {\n downcasted = int152(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(152, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int144 from int256, reverting on\n * overflow (when the input is less than smallest int144 or\n * greater than largest int144).\n *\n * Counterpart to Solidity's `int144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n */\n function toInt144(int256 value) internal pure returns (int144 downcasted) {\n downcasted = int144(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(144, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int136 from int256, reverting on\n * overflow (when the input is less than smallest int136 or\n * greater than largest int136).\n *\n * Counterpart to Solidity's `int136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n */\n function toInt136(int256 value) internal pure returns (int136 downcasted) {\n downcasted = int136(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(136, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int128 from int256, reverting on\n * overflow (when the input is less than smallest int128 or\n * greater than largest int128).\n *\n * Counterpart to Solidity's `int128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n */\n function toInt128(int256 value) internal pure returns (int128 downcasted) {\n downcasted = int128(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(128, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int120 from int256, reverting on\n * overflow (when the input is less than smallest int120 or\n * greater than largest int120).\n *\n * Counterpart to Solidity's `int120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n */\n function toInt120(int256 value) internal pure returns (int120 downcasted) {\n downcasted = int120(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(120, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int112 from int256, reverting on\n * overflow (when the input is less than smallest int112 or\n * greater than largest int112).\n *\n * Counterpart to Solidity's `int112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n */\n function toInt112(int256 value) internal pure returns (int112 downcasted) {\n downcasted = int112(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(112, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int104 from int256, reverting on\n * overflow (when the input is less than smallest int104 or\n * greater than largest int104).\n *\n * Counterpart to Solidity's `int104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n */\n function toInt104(int256 value) internal pure returns (int104 downcasted) {\n downcasted = int104(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(104, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int96 from int256, reverting on\n * overflow (when the input is less than smallest int96 or\n * greater than largest int96).\n *\n * Counterpart to Solidity's `int96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n */\n function toInt96(int256 value) internal pure returns (int96 downcasted) {\n downcasted = int96(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(96, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int88 from int256, reverting on\n * overflow (when the input is less than smallest int88 or\n * greater than largest int88).\n *\n * Counterpart to Solidity's `int88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n */\n function toInt88(int256 value) internal pure returns (int88 downcasted) {\n downcasted = int88(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(88, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int80 from int256, reverting on\n * overflow (when the input is less than smallest int80 or\n * greater than largest int80).\n *\n * Counterpart to Solidity's `int80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n */\n function toInt80(int256 value) internal pure returns (int80 downcasted) {\n downcasted = int80(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(80, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int72 from int256, reverting on\n * overflow (when the input is less than smallest int72 or\n * greater than largest int72).\n *\n * Counterpart to Solidity's `int72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n */\n function toInt72(int256 value) internal pure returns (int72 downcasted) {\n downcasted = int72(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(72, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int64 from int256, reverting on\n * overflow (when the input is less than smallest int64 or\n * greater than largest int64).\n *\n * Counterpart to Solidity's `int64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n */\n function toInt64(int256 value) internal pure returns (int64 downcasted) {\n downcasted = int64(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(64, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int56 from int256, reverting on\n * overflow (when the input is less than smallest int56 or\n * greater than largest int56).\n *\n * Counterpart to Solidity's `int56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n */\n function toInt56(int256 value) internal pure returns (int56 downcasted) {\n downcasted = int56(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(56, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int48 from int256, reverting on\n * overflow (when the input is less than smallest int48 or\n * greater than largest int48).\n *\n * Counterpart to Solidity's `int48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n */\n function toInt48(int256 value) internal pure returns (int48 downcasted) {\n downcasted = int48(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(48, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int40 from int256, reverting on\n * overflow (when the input is less than smallest int40 or\n * greater than largest int40).\n *\n * Counterpart to Solidity's `int40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n */\n function toInt40(int256 value) internal pure returns (int40 downcasted) {\n downcasted = int40(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(40, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int32 from int256, reverting on\n * overflow (when the input is less than smallest int32 or\n * greater than largest int32).\n *\n * Counterpart to Solidity's `int32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n */\n function toInt32(int256 value) internal pure returns (int32 downcasted) {\n downcasted = int32(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(32, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int24 from int256, reverting on\n * overflow (when the input is less than smallest int24 or\n * greater than largest int24).\n *\n * Counterpart to Solidity's `int24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n */\n function toInt24(int256 value) internal pure returns (int24 downcasted) {\n downcasted = int24(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(24, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int16 from int256, reverting on\n * overflow (when the input is less than smallest int16 or\n * greater than largest int16).\n *\n * Counterpart to Solidity's `int16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n */\n function toInt16(int256 value) internal pure returns (int16 downcasted) {\n downcasted = int16(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(16, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int8 from int256, reverting on\n * overflow (when the input is less than smallest int8 or\n * greater than largest int8).\n *\n * Counterpart to Solidity's `int8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n */\n function toInt8(int256 value) internal pure returns (int8 downcasted) {\n downcasted = int8(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(8, value);\n }\n }\n\n /**\n * @dev Converts an unsigned uint256 into a signed int256.\n *\n * Requirements:\n *\n * - input must be less than or equal to maxInt256.\n */\n function toInt256(uint256 value) internal pure returns (int256) {\n // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n if (value > uint256(type(int256).max)) {\n revert SafeCastOverflowedUintToInt(value);\n }\n return int256(value);\n }\n\n /**\n * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.\n */\n function toUint(bool b) internal pure returns (uint256 u) {\n assembly (\"memory-safe\") {\n u := iszero(iszero(b))\n }\n }\n}\n"},{"file_path":"contracts/common/BasisPointConstants.sol","source_code":"// SPDX-License-Identifier: MIT\n/* ———————————————————————————————————————————————————————————————————————————————— *\n * _____ ______ ______ __ __ __ __ ______ __ __ *\n * /\\ __-. /\\__ _\\ /\\ == \\ /\\ \\ /\\ \"-.\\ \\ /\\ \\ /\\__ _\\ /\\ \\_\\ \\ *\n * \\ \\ \\/\\ \\ \\/_/\\ \\/ \\ \\ __< \\ \\ \\ \\ \\ \\-. \\ \\ \\ \\ \\/_/\\ \\/ \\ \\____ \\ *\n * \\ \\____- \\ \\_\\ \\ \\_\\ \\_\\ \\ \\_\\ \\ \\_\\\\\"\\_\\ \\ \\_\\ \\ \\_\\ \\/\\_____\\ *\n * \\/____/ \\/_/ \\/_/ /_/ \\/_/ \\/_/ \\/_/ \\/_/ \\/_/ \\/_____/ *\n * *\n * ————————————————————————————————— dtrinity.org ————————————————————————————————— *\n * *\n * ▲ *\n * ▲ ▲ *\n * *\n * ———————————————————————————————————————————————————————————————————————————————— *\n * dTRINITY Protocol: https://github.com/dtrinity *\n * ———————————————————————————————————————————————————————————————————————————————— */\n\npragma solidity ^0.8.20;\n\nlibrary BasisPointConstants {\n // Shared definitions of how we represent percentages and basis points\n uint16 public constant ONE_BPS = 100; // 1 basis point with 2 decimals\n uint32 public constant ONE_PERCENT_BPS = ONE_BPS * 100;\n uint32 public constant ONE_HUNDRED_PERCENT_BPS = ONE_PERCENT_BPS * 100;\n}\n"},{"file_path":"contracts/common/WithdrawalFeeMath.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport { BasisPointConstants } from \"./BasisPointConstants.sol\";\nimport { Math } from \"@openzeppelin/contracts/utils/math/Math.sol\";\n\nlibrary WithdrawalFeeMath {\n uint256 internal constant _SCALE = BasisPointConstants.ONE_HUNDRED_PERCENT_BPS;\n\n // Calculates the fee portion of `grossAmount` using precise basis-point math.\n function calculateWithdrawalFee(uint256 grossAmount, uint256 feeBps) internal pure returns (uint256) {\n if (grossAmount == 0 || feeBps == 0) {\n return 0;\n }\n if (feeBps >= _SCALE) {\n return grossAmount;\n }\n return Math.mulDiv(grossAmount, feeBps, _SCALE);\n }\n\n // Returns the user-facing amount once the fee has been kept inside the vault.\n // Clamp the result at zero so call sites never underflow when the fee equals or exceeds the gross amount.\n function netAfterFee(uint256 grossAmount, uint256 feeBps) internal pure returns (uint256) {\n if (grossAmount == 0) {\n return 0;\n }\n if (feeBps == 0) {\n return grossAmount;\n }\n if (feeBps >= _SCALE) {\n return 0;\n }\n\n uint256 fee = calculateWithdrawalFee(grossAmount, feeBps);\n if (fee >= grossAmount) {\n return 0;\n }\n return grossAmount - fee;\n }\n\n // Computes the gross value that must be withdrawn in order to deliver `netAmount` to the user.\n // We round up so the caller never under-delivers, then tighten by a single wei to avoid overpaying\n // whenever the ceil step overshoots by one.\n function grossFromNet(uint256 netAmount, uint256 feeBps) internal pure returns (uint256) {\n if (netAmount == 0 || feeBps == 0) {\n return netAmount;\n }\n if (feeBps >= _SCALE) {\n return 0;\n }\n\n uint256 grossAmount = Math.mulDiv(netAmount, _SCALE, _SCALE - feeBps, Math.Rounding.Ceil);\n\n if (grossAmount > 0) {\n // Redo the math with one wei less; if the net is still sufficient we return the tighter value.\n uint256 alternativeNet = netAfterFee(grossAmount - 1, feeBps);\n if (alternativeNet >= netAmount) {\n grossAmount -= 1;\n }\n }\n\n return grossAmount;\n }\n}\n"},{"file_path":"contracts/vaults/dstake/interfaces/IDStakeCollateralVaultV2.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\n/**\n * @title IDStakeCollateralVaultV2 Interface\n * @notice Defines the external functions of the DStakeCollateralVaultV2 required by other\n * contracts in the dSTAKE system, primarily the DStakeTokenV2.\n */\ninterface IDStakeCollateralVaultV2 {\n /**\n * @notice Calculates the total value of all managed `strategy shares` held by the vault,\n * denominated in the underlying dStable asset.\n * @dev This is typically called by the DStakeTokenV2's `totalAssets()` function.\n * @return dStableValue The total value of managed assets in terms of the dStable asset.\n */\n function totalValueInDStable() external view returns (uint256 dStableValue);\n\n /**\n * @notice Returns the address of the underlying dStable asset the vault operates with.\n * @return The address of the dStable asset.\n */\n function dStable() external view returns (address);\n\n /**\n * @notice The DStakeTokenV2 contract address this vault serves.\n */\n function dStakeToken() external view returns (address);\n\n /**\n * @notice The DStakeRouter contract address allowed to interact.\n */\n function router() external view returns (address);\n\n /**\n * @notice Returns the strategy share at `index` from the internal supported list.\n */\n function supportedStrategyShares(uint256 index) external view returns (address);\n\n /**\n * @notice Returns the entire list of supported strategy shares. Convenient for UIs & off-chain analytics.\n */\n function getSupportedStrategyShares() external view returns (address[] memory);\n\n /**\n * @notice Transfers `amount` of `strategyShare` from this vault to the `recipient`.\n * @dev Only callable by the registered router.\n * @param strategyShare The address of the strategy share to send.\n * @param amount The amount to send.\n * @param recipient The address to receive the shares.\n */\n function transferStrategyShares(address strategyShare, uint256 amount, address recipient) external;\n\n /**\n * @notice Sets the address of the DStakeRouter contract.\n * @dev Only callable by an address with the DEFAULT_ADMIN_ROLE.\n * @param _newRouter The address of the new router contract.\n */\n function setRouter(address _newRouter) external;\n\n /**\n * @notice Adds a strategy share to the supported list. Callable only by the router.\n */\n function addSupportedStrategyShare(address strategyShare) external;\n\n /**\n * @notice Removes a strategy share from the supported list. Callable only by the router.\n */\n function removeSupportedStrategyShare(address strategyShare) external;\n\n /**\n * @notice Emitted when the router address is set.\n * @param router The address of the new router.\n */\n event RouterSet(address indexed router);\n\n /**\n * @notice Emitted when a new strategy share is added to the supported list.\n */\n event StrategyShareSupported(address indexed strategyShare);\n\n /**\n * @notice Emitted when a strategy share is removed from the supported list.\n */\n event StrategyShareRemoved(address indexed strategyShare);\n}\n"},{"file_path":"contracts/vaults/dstake/interfaces/IDStakeRouterV2.sol","source_code":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport { IDStakeCollateralVaultV2 } from \"./IDStakeCollateralVaultV2.sol\";\n\ninterface IDStakeRouterV2 {\n // --- Views ---\n function paused() external view returns (bool);\n\n function collateralVault() external view returns (IDStakeCollateralVaultV2);\n\n function dStakeToken() external view returns (address);\n\n function totalManagedAssets() external view returns (uint256);\n\n function currentShortfall() external view returns (uint256);\n\n function withdrawalFeeBps() external view returns (uint256);\n\n function maxWithdrawalFeeBps() external pure returns (uint256);\n\n function maxDeposit(address receiver) external view returns (uint256);\n\n function maxMint(address receiver) external view returns (uint256);\n\n function maxWithdraw(address owner) external view returns (uint256);\n\n function maxRedeem(address owner) external view returns (uint256);\n\n function getActiveVaultsForDeposits() external view returns (address[] memory activeVaults);\n\n function getMaxSingleVaultWithdraw() external view returns (uint256 maxAssets);\n\n function strategyShareToAdapter(address strategyShare) external view returns (address);\n\n function defaultDepositStrategyShare() external view returns (address);\n\n // --- Token Hooks ---\n function handleDeposit(address initiator, uint256 assets, uint256 shares, address receiver) external;\n\n function handleWithdraw(\n address initiator,\n address receiver,\n address owner,\n uint256 grossAssets,\n uint256 expectedNetAssets\n ) external returns (uint256 netAssets, uint256 fee);\n\n // --- Solver Flows ---\n function solverDepositAssets(\n address[] calldata vaults,\n uint256[] calldata assets,\n uint256 minShares,\n address receiver\n ) external returns (uint256 sharesMinted);\n\n function solverDepositShares(\n address[] calldata vaults,\n uint256[] calldata strategyShares,\n uint256 minShares,\n address receiver\n ) external returns (uint256 sharesMinted);\n\n function solverWithdrawAssets(\n address[] calldata vaults,\n uint256[] calldata assets,\n uint256 maxShares,\n address receiver,\n address owner\n ) external returns (uint256 netAssets, uint256 fee, uint256 sharesBurned);\n\n function solverWithdrawShares(\n address[] calldata vaults,\n uint256[] calldata strategyShares,\n uint256 maxShares,\n address receiver,\n address owner\n ) external returns (uint256 netAssets, uint256 fee, uint256 sharesBurned);\n\n // --- Maintenance ---\n function reinvestFees() external returns (uint256 amountReinvested, uint256 incentivePaid);\n\n function setReinvestIncentive(uint256 newIncentiveBps) external;\n\n function setWithdrawalFee(uint256 newFeeBps) external;\n\n function recordShortfall(uint256 delta) external;\n\n function clearShortfall(uint256 amount) external;\n}\n"}],"certified":false,"conflicting_implementations":null,"abi":[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxDeposit","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxMint","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxRedeem","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxWithdraw","type":"error"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"maxShares","type":"uint256"}],"name":"ERC4626ExceedsMaxRedeem","type":"error"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"maxAssets","type":"uint256"}],"name":"ERC4626ExceedsMaxWithdraw","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"},{"internalType":"address","name":"expectedVault","type":"address"},{"internalType":"address","name":"actualVault","type":"address"}],"name":"RouterCollateralMismatch","type":"error"},{"inputs":[],"name":"RouterNotSet","type":"error"},{"inputs":[],"name":"RouterOnly","type":"error"},{"inputs":[{"internalType":"uint256","name":"shortfall","type":"uint256"}],"name":"RouterShortfallOutstanding","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"},{"internalType":"address","name":"expectedToken","type":"address"},{"internalType":"address","name":"actualToken","type":"address"}],"name":"RouterTokenMismatch","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"ZeroAddress","type":"error"},{"inputs":[],"name":"ZeroShares","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newCollateralVault","type":"address"}],"name":"CollateralVaultSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newRouter","type":"address"}],"name":"RouterSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FEE_MANAGER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_WITHDRAWAL_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"initiator","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"netAssets","type":"uint256"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"burnFromRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"collateralVault","outputs":[{"internalType":"contract IDStakeCollateralVaultV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"grossTotalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_dStable","type":"address"},{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"address","name":"_initialAdmin","type":"address"},{"internalType":"address","name":"_initialFeeManager","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"maxMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxWithdrawalFeeBps","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"newRouter","type":"address"},{"internalType":"address","name":"newCollateralVault","type":"address"}],"name":"migrateCore","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"initiator","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"mintForRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"reinvestFees","outputs":[{"internalType":"uint256","name":"amountReinvested","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"contract IDStakeRouterV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"incentiveBps","type":"uint256"}],"name":"setReinvestIncentive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newShortfall","type":"uint256"}],"name":"setSettlementShortfall","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"feeBps","type":"uint256"}],"name":"setWithdrawalFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawalFeeBps","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}],"is_changed_bytecode":false,"is_partially_verified":false,"constructor_args":null}