{"file_path":"contracts/thusd/ThUSDMinter.sol","creation_status":"success","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.28;\n\nimport {IERC20, ERC20} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {AccessControl} from \"@openzeppelin/contracts/access/AccessControl.sol\";\nimport {ReentrancyGuard} from \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\nimport {Pausable} from \"@openzeppelin/contracts/utils/Pausable.sol\";\nimport {EIP712} from \"@openzeppelin/contracts/utils/cryptography/EIP712.sol\";\nimport {ECDSA} from \"@openzeppelin/contracts/utils/cryptography/ECDSA.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {ITheoWhitelist} from \"../interfaces/ITheoWhitelist.sol\";\nimport {IThUSDMinter} from \"./interfaces/IThUSDMinter.sol\";\nimport {ThUSD} from \"./ThUSD.sol\";\n\ncontract ThUSDMinter is AccessControl, ReentrancyGuard, Pausable, EIP712, IThUSDMinter {\n    using SafeERC20 for IERC20;\n\n    ///\n    /// CONSTANTS\n    ///\n\n    bytes32 public constant MINTER_ROLE = keccak256(\"MINTER_ROLE\");\n    bytes32 public constant EMERGENCY_ROLE = keccak256(\"EMERGENCY_ROLE\");\n    bytes32 private constant ORDER_TYPE =\n        keccak256(\"Order(uint8 order_type,uint256 expiry,uint256 nonce,address signer,address recipient,address collateral_asset,uint256 collateral_amount,uint256 thusd_amount)\");\n\n    uint256 public constant MAX_FEE_BPS = 10; // 0.1% hard cap\n    uint public constant MINIMUM_MINT_AMOUNT = 1e6; // minimum mint/redeem amount to prevent dust attack\n\n    ///\n    /// STATE VARIABLES\n    ///\n\n    address public immutable thusd;\n    ITheoWhitelist public immutable whitelist;\n    mapping(address => bool) public supportedAssets;\n    address public mintDestination; // multisig where collateral is sent\n    address public redeemDestination; // multisig where collateral is redeemed from\n    uint256 public maxMintPerBlock;\n    uint256 public maxRedeemPerBlock;\n    uint256 public redeemFeeBps; // redemption fee in basis points\n    mapping(uint256 => uint256) public mintedPerBlock;\n    mapping(uint256 => uint256) public redeemedPerBlock;\n    mapping(bytes32 => bool) public usedOrderHashes;\n\n    ///\n    /// CONSTRUCTOR\n    ///\n\n    constructor(address thusd_, ITheoWhitelist whitelist_, address admin_, address mintDest_, address redeemDest_, uint256 maxMintPerBlock_, uint256 maxRedeemPerBlock_) EIP712(\"ThUSDMinter\", \"1\") {\n        if (address(thusd_) == address(0)) revert InvalidZeroAddress();\n        if (address(whitelist_) == address(0)) revert InvalidZeroAddress();\n        if (admin_ == address(0)) revert InvalidZeroAddress();\n\n        thusd = thusd_;\n        whitelist = whitelist_;\n        maxMintPerBlock = maxMintPerBlock_;\n        maxRedeemPerBlock = maxRedeemPerBlock_;\n\n        // check backing addresses\n        _checkBackingAddress(mintDest_);\n        _checkBackingAddress(redeemDest_);\n        mintDestination = mintDest_;\n        redeemDestination = redeemDest_;\n\n        _grantRole(DEFAULT_ADMIN_ROLE, admin_);\n    }\n\n    ///\n    /// EXTERNAL FUNCTIONS\n    ///\n\n    function mint(Order calldata order, bytes calldata signature) external nonReentrant whenNotPaused onlyRole(MINTER_ROLE) {\n        if (order.order_type != OrderType.MINT) revert InvalidOrder();\n        if (mintedPerBlock[block.number] + order.thusd_amount > maxMintPerBlock) {\n            revert MaxMintPerBlockExceeded();\n        }\n        _validateOrder(order, signature);\n\n        mintedPerBlock[block.number] += order.thusd_amount;\n\n        _transferCollateralIn(order);\n        ThUSD(thusd).mint(order.recipient, order.thusd_amount);\n\n        emit Mint(order.signer, order.recipient, order.collateral_asset, order.collateral_amount, order.thusd_amount);\n    }\n\n    function redeem(Order calldata order, bytes calldata signature) external nonReentrant whenNotPaused onlyRole(MINTER_ROLE) {\n        if (order.order_type != OrderType.REDEEM) revert InvalidOrder();\n        if (redeemedPerBlock[block.number] + order.thusd_amount > maxRedeemPerBlock) {\n            revert MaxRedeemPerBlockExceeded();\n        }\n        _validateOrder(order, signature);\n\n        redeemedPerBlock[block.number] += order.thusd_amount;\n\n        ThUSD(thusd).burnFrom(order.signer, order.thusd_amount);\n        (uint256 amountTransferred, uint256 fee) = _transferCollateralOut(order);\n\n        emit Redeem(order.signer, order.recipient, order.collateral_asset, order.thusd_amount, amountTransferred, fee);\n    }\n\n    ///\n    /// ADMIN FUNCTIONS\n    ///\n\n    function addSupportedAsset(address asset) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        if (asset == address(0) || asset == thusd || supportedAssets[asset]) revert InvalidAssetAddress();\n        supportedAssets[asset] = true;\n        emit AssetAdded(asset);\n    }\n\n    function removeSupportedAsset(address asset) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        if (!supportedAssets[asset]) revert InvalidAssetAddress();\n        supportedAssets[asset] = false;\n        emit AssetRemoved(asset);\n    }\n\n    function setMintDestination(address newMintDestination) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        _checkBackingAddress(newMintDestination);\n        address oldMintDestination = mintDestination;\n        mintDestination = newMintDestination;\n        emit MintDestinationChanged(oldMintDestination, newMintDestination);\n    }\n\n    function setRedeemDestination(address newRedeemDestination) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        _checkBackingAddress(newRedeemDestination);\n        address oldRedeemDestination = redeemDestination;\n        redeemDestination = newRedeemDestination;\n        emit RedeemDestinationChanged(oldRedeemDestination, newRedeemDestination);\n    }\n\n    function setMaxMintPerBlock(uint256 newMax) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        uint256 oldMax = maxMintPerBlock;\n        maxMintPerBlock = newMax;\n        emit MaxMintPerBlockChanged(oldMax, newMax);\n    }\n\n    function setMaxRedeemPerBlock(uint256 newMax) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        uint256 oldMax = maxRedeemPerBlock;\n        maxRedeemPerBlock = newMax;\n        emit MaxRedeemPerBlockChanged(oldMax, newMax);\n    }\n\n    function setRedeemFeeBps(uint256 newFeeBps) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        if (newFeeBps > MAX_FEE_BPS) revert FeeTooHigh();\n        uint256 oldFeeBps = redeemFeeBps;\n        redeemFeeBps = newFeeBps;\n        emit RedeemFeeChanged(oldFeeBps, newFeeBps);\n    }\n\n    function pause() external onlyRole(EMERGENCY_ROLE) {\n        _pause();\n    }\n\n    function unpause() external onlyRole(DEFAULT_ADMIN_ROLE) {\n        _unpause();\n    }\n\n    ///\n    /// VIEW FUNCTIONS\n    ///\n\n    function isSupportedAsset(address asset) external view returns (bool) {\n        return supportedAssets[asset];\n    }\n\n    function hashOrder(Order calldata order) public view returns (bytes32) {\n        return\n            _hashTypedDataV4(\n                keccak256(abi.encode(ORDER_TYPE, order.order_type, order.expiry, order.nonce, order.signer, order.recipient, order.collateral_asset, order.collateral_amount, order.thusd_amount))\n            );\n    }\n\n    ///\n    /// INTERNAL FUNCTIONS\n    ///\n\n    function _validateOrder(Order calldata order, bytes calldata signature) internal {\n        if (order.collateral_amount < MINIMUM_MINT_AMOUNT || order.thusd_amount < MINIMUM_MINT_AMOUNT) revert InvalidAmount();\n        if (block.timestamp > order.expiry) revert OrderExpired();\n        if (!supportedAssets[order.collateral_asset]) revert UnsupportedAsset();\n        if (order.signer == address(0) || order.recipient == address(0)) revert InvalidZeroAddress();\n        // check that order.signer is not mint/redeem destination\n        if (order.signer == mintDestination || order.signer == redeemDestination) revert SignerIsDestination();\n\n        // check amount based on order type for extra protection\n        uint256 collateralDecimals = ERC20(order.collateral_asset).decimals();\n        uint256 thusdDecimals = ERC20(address(thusd)).decimals();\n        uint256 collateralAmountNormalized = order.collateral_amount * (10 ** (18 - collateralDecimals));\n        uint256 thusdAmountNormalized = order.thusd_amount * (10 ** (18 - thusdDecimals));\n        if (order.order_type == OrderType.MINT) {\n            // ensure thusd does not exceed collateral\n            if (thusdAmountNormalized > collateralAmountNormalized) revert InvalidAssetRatio();\n        } else if (order.order_type == OrderType.REDEEM) {\n            // ensure collateral does not exceed thusd\n            if (collateralAmountNormalized > thusdAmountNormalized) revert InvalidAssetRatio();\n        } else {\n            revert InvalidOrder();\n        }\n\n        // check order hash and signature\n        bytes32 orderHash = hashOrder(order);\n        if (usedOrderHashes[orderHash]) revert OrderAlreadyUsed();\n\n        address recovered = ECDSA.recover(orderHash, signature);\n        if (recovered != order.signer) revert InvalidSignature();\n\n        // set order hash as used\n        usedOrderHashes[orderHash] = true;\n\n        // check whitelist/blacklist status\n        whitelist.onlyWhitelisted(order.signer);\n        whitelist.onlyNotBlacklisted(order.signer);\n        whitelist.onlyWhitelisted(order.recipient);\n        whitelist.onlyNotBlacklisted(order.recipient);\n    }\n\n    function _transferCollateralIn(Order calldata order) internal {\n        IERC20(order.collateral_asset).safeTransferFrom(order.signer, mintDestination, order.collateral_amount);\n    }\n\n    function _transferCollateralOut(Order calldata order) internal returns (uint256 amountTransferred, uint256 fee) {\n        fee = Math.mulDiv(order.collateral_amount, redeemFeeBps, 10_000, Math.Rounding.Ceil);\n        amountTransferred = order.collateral_amount - fee;\n        IERC20(order.collateral_asset).safeTransferFrom(redeemDestination, order.recipient, amountTransferred);\n    }\n\n    function _checkBackingAddress(address addr) internal view {\n        if (addr == thusd || addr == address(0) || addr == address(this)) revert InvalidBackingAddress();\n    }\n}\n","deployed_bytecode":"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","optimization_enabled":true,"verified_twin_address_hash":null,"is_verified":true,"compiler_settings":{"evmVersion":"prague","libraries":{},"metadata":{"bytecodeHash":"ipfs"},"optimizer":{"enabled":true,"runs":200},"outputSelection":{"*":{"":["*"],"*":["*"]}},"remappings":["@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/","@openzeppelin/contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/","ds-test/=lib/solidity-http/lib/solidity-stringutils/lib/ds-test/src/","erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/","eth-gas-reporter/=node_modules/eth-gas-reporter/","forge-std/=lib/forge-std/src/","halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/","hardhat/=node_modules/hardhat/","openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/","openzeppelin-contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/","openzeppelin-foundry-upgrades/=lib/openzeppelin-foundry-upgrades/src/","solidity-http/=lib/solidity-http/src/","solidity-stringutils/=lib/solidity-http/lib/solidity-stringutils/"],"viaIR":true},"optimization_runs":200,"sourcify_repo_url":null,"decoded_constructor_args":[["0xa3fE5c7596024E6811E14F029937D5bd8Ae485b3",{"internalType":"address","name":"thusd_","type":"address"}],["0x14D38a3eD85EbDdb3E22fF022E38e645A311F388",{"internalType":"contract ITheoWhitelist","name":"whitelist_","type":"address"}],["0x3d5c293E04A584a5D3F9ad5698784F1D77A76f33",{"internalType":"address","name":"admin_","type":"address"}],["0xEc417Ccb6dD26868Cca993a92F37217b1D4b3c2f",{"internalType":"address","name":"mintDest_","type":"address"}],["0xEc417Ccb6dD26868Cca993a92F37217b1D4b3c2f",{"internalType":"address","name":"redeemDest_","type":"address"}],["1000000000000",{"internalType":"uint256","name":"maxMintPerBlock_","type":"uint256"}],["200000000000",{"internalType":"uint256","name":"maxRedeemPerBlock_","type":"uint256"}]],"compiler_version":"v0.8.28+commit.7893614a","is_verified_via_verifier_alliance":false,"verified_at":"2026-04-08T19:36:06.021666Z","implementations":[],"proxy_type":null,"external_libraries":[],"creation_bytecode":"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","name":"ThUSDMinter","is_blueprint":false,"license_type":"none","is_fully_verified":true,"is_verified_via_eth_bytecode_db":false,"language":"solidity","evm_version":"prague","can_be_visualized_via_sol2uml":true,"is_verified_via_sourcify":false,"additional_sources":[{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC20Metadata} from \"./extensions/IERC20Metadata.sol\";\nimport {Context} from \"../../utils/Context.sol\";\nimport {IERC20Errors} from \"../../interfaces/draft-IERC6093.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {\n    mapping(address account => uint256) private _balances;\n\n    mapping(address account => mapping(address spender => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * Both values are immutable: they can only be set once during construction.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the default value returned by this function, unless\n     * it's overridden.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual returns (uint256) {\n        return _totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `value`.\n     */\n    function transfer(address to, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Skips emitting an {Approval} event indicating an allowance update. This is not\n     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `value`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `value`.\n     */\n    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, value);\n        _transfer(from, to, value);\n        return true;\n    }\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _transfer(address from, address to, uint256 value) internal {\n        if (from == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        if (to == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(from, to, value);\n    }\n\n    /**\n     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n     * this function.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _update(address from, address to, uint256 value) internal virtual {\n        if (from == address(0)) {\n            // Overflow check required: The rest of the code assumes that totalSupply never overflows\n            _totalSupply += value;\n        } else {\n            uint256 fromBalance = _balances[from];\n            if (fromBalance < value) {\n                revert ERC20InsufficientBalance(from, fromBalance, value);\n            }\n            unchecked {\n                // Overflow not possible: value <= fromBalance <= totalSupply.\n                _balances[from] = fromBalance - value;\n            }\n        }\n\n        if (to == address(0)) {\n            unchecked {\n                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n                _totalSupply -= value;\n            }\n        } else {\n            unchecked {\n                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n                _balances[to] += value;\n            }\n        }\n\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n     * Relies on the `_update` mechanism\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _mint(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(address(0), account, value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n     * Relies on the `_update` mechanism.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead\n     */\n    function _burn(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        _update(account, address(0), value);\n    }\n\n    /**\n     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address owner, address spender, uint256 value) internal {\n        _approve(owner, spender, value, true);\n    }\n\n    /**\n     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n     *\n     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n     * `Approval` event during `transferFrom` operations.\n     *\n     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n     * true using the following override:\n     *\n     * ```solidity\n     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n     *     super._approve(owner, spender, value, true);\n     * }\n     * ```\n     *\n     * Requirements are the same as {_approve}.\n     */\n    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n        if (owner == address(0)) {\n            revert ERC20InvalidApprover(address(0));\n        }\n        if (spender == address(0)) {\n            revert ERC20InvalidSpender(address(0));\n        }\n        _allowances[owner][spender] = value;\n        if (emitEvent) {\n            emit Approval(owner, spender, value);\n        }\n    }\n\n    /**\n     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.\n     *\n     * Does not update the allowance value in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Does not emit an {Approval} event.\n     */\n    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance < type(uint256).max) {\n            if (currentAllowance < value) {\n                revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n            }\n            unchecked {\n                _approve(owner, spender, currentAllowance - value, false);\n            }\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS\n    }\n\n    /**\n     * @dev The signature derives the `address(0)`.\n     */\n    error ECDSAInvalidSignature();\n\n    /**\n     * @dev The signature has an invalid length.\n     */\n    error ECDSAInvalidSignatureLength(uint256 length);\n\n    /**\n     * @dev The signature has an S value that is in the upper half order.\n     */\n    error ECDSAInvalidSignatureS(bytes32 s);\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not\n     * return address(0) without also returning an error description. Errors are documented using an enum (error type)\n     * and a bytes32 providing additional information about the error.\n     *\n     * If no error is returned, then the address can be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes memory signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            assembly (\"memory-safe\") {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        unchecked {\n            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n            // We do not check for an overflow here since the shift operation results in 0 or 1.\n            uint8 v = uint8((uint256(vs) >> 255) + 27);\n            return tryRecover(hash, v, r, s);\n        }\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n     */\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function tryRecover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS, s);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature, bytes32(0));\n        }\n\n        return (signer, RecoverError.NoError, bytes32(0));\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.\n     */\n    function _throwError(RecoverError error, bytes32 errorArg) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert ECDSAInvalidSignature();\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert ECDSAInvalidSignatureLength(uint256(errorArg));\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert ECDSAInvalidSignatureS(errorArg);\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/draft-IERC1822.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"},{"file_path":"contracts/thusd/interfaces/IThUSDMinter.sol","source_code":"pragma solidity ^0.8.28;\n\ninterface IThUSDMinter {\n    ///\n    /// Order Details\n    ///\n\n    enum OrderType {\n        MINT,\n        REDEEM\n    }\n\n    struct Order {\n        OrderType order_type;\n        uint256 expiry;\n        uint256 nonce;\n        address signer;\n        address recipient;\n        address collateral_asset;\n        uint256 collateral_amount;\n        uint256 thusd_amount;\n    }\n\n    ///\n    /// Events\n    ///\n    event Mint(address indexed signer, address indexed recipient, address indexed collateralAsset, uint256 collateralAmount, uint256 thusdAmount);\n    event Redeem(address indexed signer, address indexed recipient, address indexed collateralAsset, uint256 thusdAmount, uint256 collateralTransferred, uint256 fee);\n    event AssetAdded(address indexed asset);\n    event AssetRemoved(address indexed asset);\n    event MintDestinationChanged(address indexed oldDestination, address indexed newDestination);\n    event RedeemDestinationChanged(address indexed oldDestination, address indexed newDestination);\n    event MaxMintPerBlockChanged(uint256 oldMax, uint256 newMax);\n    event MaxRedeemPerBlockChanged(uint256 oldMax, uint256 newMax);\n    event RedeemFeeChanged(uint256 oldFeeBps, uint256 newFeeBps);\n\n    ///\n    /// Errors\n    ///\n    error InvalidOrder();\n    error InvalidSignature();\n    error InvalidZeroAddress();\n    error InvalidAmount();\n    error InvalidAssetRatio();\n    error InvalidAssetAddress();\n    error InvalidBackingAddress();\n    error OrderAlreadyUsed();\n    error OrderExpired();\n    error UnsupportedAsset();\n    error MaxMintPerBlockExceeded();\n    error MaxRedeemPerBlockExceeded();\n    error FeeTooHigh();\n    error SignerIsDestination();\n\n    ///\n    /// FUNCTIONS\n    ///\n    function mint(Order calldata order, bytes calldata signature) external;\n\n    function redeem(Order calldata order, bytes calldata signature) external;\n\n    function hashOrder(Order calldata order) external view returns (bytes32);\n\n    function isSupportedAsset(address asset) external view returns (bool);\n\n    function mintDestination() external view returns (address);\n\n    function redeemDestination() external view returns (address);\n\n    ///\n    /// ADMIN FUNCTIONS\n    ///\n    function addSupportedAsset(address asset) external;\n\n    function removeSupportedAsset(address asset) external;\n\n    function setMintDestination(address newAddress) external;\n\n    function setRedeemDestination(address newAddress) external;\n\n    function setMaxMintPerBlock(uint256 newMax) external;\n\n    function setMaxRedeemPerBlock(uint256 newMax) external;\n\n    function setRedeemFeeBps(uint256 newFeeBps) external;\n\n    function pause() external;\n\n    function unpause() external;\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/introspection/ERC165.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/ShortStrings.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/ShortStrings.sol)\n\npragma solidity ^0.8.20;\n\nimport {StorageSlot} from \"./StorageSlot.sol\";\n\n// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |\n// | length  | 0x                                                              BB |\ntype ShortString is bytes32;\n\n/**\n * @dev This library provides functions to convert short memory strings\n * into a `ShortString` type that can be used as an immutable variable.\n *\n * Strings of arbitrary length can be optimized using this library if\n * they are short enough (up to 31 bytes) by packing them with their\n * length (1 byte) in a single EVM word (32 bytes). Additionally, a\n * fallback mechanism can be used for every other case.\n *\n * Usage example:\n *\n * ```solidity\n * contract Named {\n *     using ShortStrings for *;\n *\n *     ShortString private immutable _name;\n *     string private _nameFallback;\n *\n *     constructor(string memory contractName) {\n *         _name = contractName.toShortStringWithFallback(_nameFallback);\n *     }\n *\n *     function name() external view returns (string memory) {\n *         return _name.toStringWithFallback(_nameFallback);\n *     }\n * }\n * ```\n */\nlibrary ShortStrings {\n    // Used as an identifier for strings longer than 31 bytes.\n    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;\n\n    error StringTooLong(string str);\n    error InvalidShortString();\n\n    /**\n     * @dev Encode a string of at most 31 chars into a `ShortString`.\n     *\n     * This will trigger a `StringTooLong` error is the input string is too long.\n     */\n    function toShortString(string memory str) internal pure returns (ShortString) {\n        bytes memory bstr = bytes(str);\n        if (bstr.length > 31) {\n            revert StringTooLong(str);\n        }\n        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));\n    }\n\n    /**\n     * @dev Decode a `ShortString` back to a \"normal\" string.\n     */\n    function toString(ShortString sstr) internal pure returns (string memory) {\n        uint256 len = byteLength(sstr);\n        // using `new string(len)` would work locally but is not memory safe.\n        string memory str = new string(32);\n        assembly (\"memory-safe\") {\n            mstore(str, len)\n            mstore(add(str, 0x20), sstr)\n        }\n        return str;\n    }\n\n    /**\n     * @dev Return the length of a `ShortString`.\n     */\n    function byteLength(ShortString sstr) internal pure returns (uint256) {\n        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;\n        if (result > 31) {\n            revert InvalidShortString();\n        }\n        return result;\n    }\n\n    /**\n     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.\n     */\n    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {\n        if (bytes(value).length < 32) {\n            return toShortString(value);\n        } else {\n            StorageSlot.getStringSlot(store).value = value;\n            return ShortString.wrap(FALLBACK_SENTINEL);\n        }\n    }\n\n    /**\n     * @dev Decode a string that was encoded to `ShortString` or written to storage using {toShortStringWithFallback}.\n     */\n    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {\n        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {\n            return toString(value);\n        } else {\n            return store;\n        }\n    }\n\n    /**\n     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using\n     * {toShortStringWithFallback}.\n     *\n     * WARNING: This will return the \"byte length\" of the string. This may not reflect the actual length in terms of\n     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.\n     */\n    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {\n        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {\n            return byteLength(value);\n        } else {\n            return bytes(store).length;\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/utils/cryptography/EIP712Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/EIP712.sol)\n\npragma solidity ^0.8.20;\n\nimport {MessageHashUtils} from \"@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol\";\nimport {IERC5267} from \"@openzeppelin/contracts/interfaces/IERC5267.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose\n * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract\n * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to\n * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain\n * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the\n * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.\n */\nabstract contract EIP712Upgradeable is Initializable, IERC5267 {\n    bytes32 private constant TYPE_HASH =\n        keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\");\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712\n    struct EIP712Storage {\n        /// @custom:oz-renamed-from _HASHED_NAME\n        bytes32 _hashedName;\n        /// @custom:oz-renamed-from _HASHED_VERSION\n        bytes32 _hashedVersion;\n\n        string _name;\n        string _version;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.EIP712\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;\n\n    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {\n        assembly {\n            $.slot := EIP712StorageLocation\n        }\n    }\n\n    /**\n     * @dev Initializes the domain separator and parameter caches.\n     *\n     * The meaning of `name` and `version` is specified in\n     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:\n     *\n     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n     * - `version`: the current major version of the signing domain.\n     *\n     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n     * contract upgrade].\n     */\n    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {\n        __EIP712_init_unchained(name, version);\n    }\n\n    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {\n        EIP712Storage storage $ = _getEIP712Storage();\n        $._name = name;\n        $._version = version;\n\n        // Reset prior values in storage if upgrading\n        $._hashedName = 0;\n        $._hashedVersion = 0;\n    }\n\n    /**\n     * @dev Returns the domain separator for the current chain.\n     */\n    function _domainSeparatorV4() internal view returns (bytes32) {\n        return _buildDomainSeparator();\n    }\n\n    function _buildDomainSeparator() private view returns (bytes32) {\n        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));\n    }\n\n    /**\n     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n     * function returns the hash of the fully encoded EIP712 message for this domain.\n     *\n     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n     *\n     * ```solidity\n     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n     *     keccak256(\"Mail(address to,string contents)\"),\n     *     mailTo,\n     *     keccak256(bytes(mailContents))\n     * )));\n     * address signer = ECDSA.recover(digest, signature);\n     * ```\n     */\n    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);\n    }\n\n    /**\n     * @inheritdoc IERC5267\n     */\n    function eip712Domain()\n        public\n        view\n        virtual\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        )\n    {\n        EIP712Storage storage $ = _getEIP712Storage();\n        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized\n        // and the EIP712 domain is not reliable, as it will be missing name and version.\n        require($._hashedName == 0 && $._hashedVersion == 0, \"EIP712: Uninitialized\");\n\n        return (\n            hex\"0f\", // 01111\n            _EIP712Name(),\n            _EIP712Version(),\n            block.chainid,\n            address(this),\n            bytes32(0),\n            new uint256[](0)\n        );\n    }\n\n    /**\n     * @dev The name parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Name() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev The version parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Version() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._version;\n    }\n\n    /**\n     * @dev The hash of the name parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.\n     */\n    function _EIP712NameHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory name = _EIP712Name();\n        if (bytes(name).length > 0) {\n            return keccak256(bytes(name));\n        } else {\n            // If the name is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.\n            bytes32 hashedName = $._hashedName;\n            if (hashedName != 0) {\n                return hashedName;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n\n    /**\n     * @dev The hash of the version parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.\n     */\n    function _EIP712VersionHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory version = _EIP712Version();\n        if (bytes(version).length > 0) {\n            return keccak256(bytes(version));\n        } else {\n            // If the version is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.\n            bytes32 hashedVersion = $._hashedVersion;\n            if (hashedVersion != 0) {\n                return hashedVersion;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/MessageHashUtils.sol)\n\npragma solidity ^0.8.20;\n\nimport {Strings} from \"../Strings.sol\";\n\n/**\n * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.\n *\n * The library provides methods for generating a hash of a message that conforms to the\n * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]\n * specifications.\n */\nlibrary MessageHashUtils {\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing a bytes32 `messageHash` with\n     * `\"\\x19Ethereum Signed Message:\\n32\"` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with\n     * keccak256, although any bytes32 value can be safely used because the final digest will\n     * be re-hashed.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, \"\\x19Ethereum Signed Message:\\n32\") // 32 is the bytes-length of messageHash\n            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix\n            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing an arbitrary `message` with\n     * `\"\\x19Ethereum Signed Message:\\n\" + len(message)` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {\n        return\n            keccak256(bytes.concat(\"\\x19Ethereum Signed Message:\\n\", bytes(Strings.toString(message.length)), message));\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x00` (data with intended validator).\n     *\n     * The digest is calculated by prefixing an arbitrary `data` with `\"\\x19\\x00\"` and the intended\n     * `validator` address. Then hashing the result.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(hex\"19_00\", validator, data));\n    }\n\n    /**\n     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.\n     */\n    function toDataWithIntendedValidatorHash(\n        address validator,\n        bytes32 messageHash\n    ) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, hex\"19_00\")\n            mstore(0x02, shl(96, validator))\n            mstore(0x16, messageHash)\n            digest := keccak256(0x00, 0x36)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).\n     *\n     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with\n     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            mstore(ptr, hex\"19_01\")\n            mstore(add(ptr, 0x02), domainSeparator)\n            mstore(add(ptr, 0x22), structHash)\n            digest := keccak256(ptr, 0x42)\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/proxy/ERC1967/ERC1967Utils.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.2.0) (proxy/ERC1967/ERC1967Utils.sol)\n\npragma solidity ^0.8.22;\n\nimport {IBeacon} from \"../beacon/IBeacon.sol\";\nimport {IERC1967} from \"../../interfaces/IERC1967.sol\";\nimport {Address} from \"../../utils/Address.sol\";\nimport {StorageSlot} from \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This library provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.\n */\nlibrary ERC1967Utils {\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev The `implementation` of the proxy is invalid.\n     */\n    error ERC1967InvalidImplementation(address implementation);\n\n    /**\n     * @dev The `admin` of the proxy is invalid.\n     */\n    error ERC1967InvalidAdmin(address admin);\n\n    /**\n     * @dev The `beacon` of the proxy is invalid.\n     */\n    error ERC1967InvalidBeacon(address beacon);\n\n    /**\n     * @dev An upgrade function sees `msg.value > 0` that may be lost.\n     */\n    error ERC1967NonPayable();\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        if (newImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(newImplementation);\n        }\n        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Performs implementation upgrade with additional setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) internal {\n        _setImplementation(newImplementation);\n        emit IERC1967.Upgraded(newImplementation);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(newImplementation, data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function getAdmin() internal view returns (address) {\n        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        if (newAdmin == address(0)) {\n            revert ERC1967InvalidAdmin(address(0));\n        }\n        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {IERC1967-AdminChanged} event.\n     */\n    function changeAdmin(address newAdmin) internal {\n        emit IERC1967.AdminChanged(getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is the keccak-256 hash of \"eip1967.proxy.beacon\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the ERC-1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        if (newBeacon.code.length == 0) {\n            revert ERC1967InvalidBeacon(newBeacon);\n        }\n\n        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;\n\n        address beaconImplementation = IBeacon(newBeacon).implementation();\n        if (beaconImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(beaconImplementation);\n        }\n    }\n\n    /**\n     * @dev Change the beacon and trigger a setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-BeaconUpgraded} event.\n     *\n     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since\n     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for\n     * efficiency.\n     */\n    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {\n        _setBeacon(newBeacon);\n        emit IERC1967.BeaconUpgraded(newBeacon);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract\n     * if an upgrade doesn't perform an initialization call.\n     */\n    function _checkNonPayable() private {\n        if (msg.value > 0) {\n            revert ERC1967NonPayable();\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/token/ERC20/extensions/ERC20BurnableUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {ContextUpgradeable} from \"../../../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"../../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Extension of {ERC20} that allows token holders to destroy both their own\n * tokens and those that they have an allowance for, in a way that can be\n * recognized off-chain (via event analysis).\n */\nabstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {\n    function __ERC20Burnable_init() internal onlyInitializing {\n    }\n\n    function __ERC20Burnable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Destroys a `value` amount of tokens from the caller.\n     *\n     * See {ERC20-_burn}.\n     */\n    function burn(uint256 value) public virtual {\n        _burn(_msgSender(), value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, deducting from\n     * the caller's allowance.\n     *\n     * See {ERC20-_burn} and {ERC20-allowance}.\n     *\n     * Requirements:\n     *\n     * - the caller must have allowance for ``accounts``'s tokens of at least\n     * `value`.\n     */\n    function burnFrom(address account, uint256 value) public virtual {\n        _spendAllowance(account, _msgSender(), value);\n        _burn(account, value);\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC1363.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},{"file_path":"contracts/thusd/ThUSD.sol","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.28;\n\nimport {ERC20Upgradeable} from \"@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol\";\nimport {ERC20BurnableUpgradeable} from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol\";\nimport {ERC20PermitUpgradeable} from \"@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol\";\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport {Ownable2StepUpgradeable} from \"@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol\";\n\ncontract ThUSD is ERC20Upgradeable, ERC20BurnableUpgradeable, ERC20PermitUpgradeable, Ownable2StepUpgradeable, UUPSUpgradeable {\n    address public minter;\n\n    error OnlyMinter();\n\n    event MinterSet(address indexed minter);\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor() {\n        _disableInitializers();\n    }\n\n    function initialize(address _owner) external initializer {\n        __ThUSD_init(_owner);\n    }\n\n    function __ThUSD_init(address _owner) internal onlyInitializing {\n        __ERC20_init(\"thUSD\", \"thUSD\");\n        __ERC20Burnable_init();\n        __ERC20Permit_init(\"thUSD\");\n        __Ownable_init(_owner);\n        __Ownable2Step_init();\n        __UUPSUpgradeable_init();\n    }\n\n    function decimals() public pure override returns (uint8) {\n        return 6;\n    }\n\n    function setMinter(address _minter) external onlyOwner {\n        minter = _minter;\n        emit MinterSet(_minter);\n    }\n\n    function mint(address to, uint256 amount) external {\n        if (msg.sender != minter) revert OnlyMinter();\n        _mint(to, amount);\n    }\n\n    function _authorizeUpgrade(address) internal override onlyOwner {}\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/proxy/utils/UUPSUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.22;\n\nimport {IERC1822Proxiable} from \"@openzeppelin/contracts/interfaces/draft-IERC1822.sol\";\nimport {ERC1967Utils} from \"@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol\";\nimport {Initializable} from \"./Initializable.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n */\nabstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address private immutable __self = address(this);\n\n    /**\n     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`\n     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,\n     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.\n     * If the getter returns `\"5.0.0\"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must\n     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function\n     * during an upgrade.\n     */\n    string public constant UPGRADE_INTERFACE_VERSION = \"5.0.0\";\n\n    /**\n     * @dev The call is from an unauthorized context.\n     */\n    error UUPSUnauthorizedCallContext();\n\n    /**\n     * @dev The storage `slot` is unsupported as a UUID.\n     */\n    error UUPSUnsupportedProxiableUUID(bytes32 slot);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        _checkProxy();\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        _checkNotDelegated();\n        _;\n    }\n\n    function __UUPSUpgradeable_init() internal onlyInitializing {\n    }\n\n    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view virtual notDelegated returns (bytes32) {\n        return ERC1967Utils.IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data);\n    }\n\n    /**\n     * @dev Reverts if the execution is not performed via delegatecall or the execution\n     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.\n     */\n    function _checkProxy() internal view virtual {\n        if (\n            address(this) == __self || // Must be called through delegatecall\n            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy\n        ) {\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Reverts if the execution is performed via delegatecall.\n     * See {notDelegated}.\n     */\n    function _checkNotDelegated() internal view virtual {\n        if (address(this) != __self) {\n            // Must not be called through delegatecall\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.\n     *\n     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value\n     * is expected to be the implementation slot in ERC-1967.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {\n        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {\n                revert UUPSUnsupportedProxiableUUID(slot);\n            }\n            ERC1967Utils.upgradeToAndCall(newImplementation, data);\n        } catch {\n            // The implementation is not UUPS\n            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/token/ERC20/ERC20Upgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {ContextUpgradeable} from \"../../utils/ContextUpgradeable.sol\";\nimport {IERC20Errors} from \"@openzeppelin/contracts/interfaces/draft-IERC6093.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {\n    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20\n    struct ERC20Storage {\n        mapping(address account => uint256) _balances;\n\n        mapping(address account => mapping(address spender => uint256)) _allowances;\n\n        uint256 _totalSupply;\n\n        string _name;\n        string _symbol;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC20\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;\n\n    function _getERC20Storage() private pure returns (ERC20Storage storage $) {\n        assembly {\n            $.slot := ERC20StorageLocation\n        }\n    }\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * Both values are immutable: they can only be set once during construction.\n     */\n    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {\n        __ERC20_init_unchained(name_, symbol_);\n    }\n\n    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n        ERC20Storage storage $ = _getERC20Storage();\n        $._name = name_;\n        $._symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the default value returned by this function, unless\n     * it's overridden.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `value`.\n     */\n    function transfer(address to, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual returns (uint256) {\n        ERC20Storage storage $ = _getERC20Storage();\n        return $._allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Skips emitting an {Approval} event indicating an allowance update. This is not\n     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `value`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `value`.\n     */\n    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, value);\n        _transfer(from, to, value);\n        return true;\n    }\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _transfer(address from, address to, uint256 value) internal {\n        if (from == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        if (to == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(from, to, value);\n    }\n\n    /**\n     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n     * this function.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _update(address from, address to, uint256 value) internal virtual {\n        ERC20Storage storage $ = _getERC20Storage();\n        if (from == address(0)) {\n            // Overflow check required: The rest of the code assumes that totalSupply never overflows\n            $._totalSupply += value;\n        } else {\n            uint256 fromBalance = $._balances[from];\n            if (fromBalance < value) {\n                revert ERC20InsufficientBalance(from, fromBalance, value);\n            }\n            unchecked {\n                // Overflow not possible: value <= fromBalance <= totalSupply.\n                $._balances[from] = fromBalance - value;\n            }\n        }\n\n        if (to == address(0)) {\n            unchecked {\n                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n                $._totalSupply -= value;\n            }\n        } else {\n            unchecked {\n                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n                $._balances[to] += value;\n            }\n        }\n\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n     * Relies on the `_update` mechanism\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _mint(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(address(0), account, value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n     * Relies on the `_update` mechanism.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead\n     */\n    function _burn(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        _update(account, address(0), value);\n    }\n\n    /**\n     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address owner, address spender, uint256 value) internal {\n        _approve(owner, spender, value, true);\n    }\n\n    /**\n     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n     *\n     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n     * `Approval` event during `transferFrom` operations.\n     *\n     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n     * true using the following override:\n     *\n     * ```solidity\n     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n     *     super._approve(owner, spender, value, true);\n     * }\n     * ```\n     *\n     * Requirements are the same as {_approve}.\n     */\n    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n        ERC20Storage storage $ = _getERC20Storage();\n        if (owner == address(0)) {\n            revert ERC20InvalidApprover(address(0));\n        }\n        if (spender == address(0)) {\n            revert ERC20InvalidSpender(address(0));\n        }\n        $._allowances[owner][spender] = value;\n        if (emitEvent) {\n            emit Approval(owner, spender, value);\n        }\n    }\n\n    /**\n     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.\n     *\n     * Does not update the allowance value in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Does not emit an {Approval} event.\n     */\n    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance < type(uint256).max) {\n            if (currentAllowance < value) {\n                revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n            }\n            unchecked {\n                _approve(owner, spender, currentAllowance - value, false);\n            }\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/token/ERC20/extensions/ERC20PermitUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/ERC20Permit.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20Permit} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol\";\nimport {ERC20Upgradeable} from \"../ERC20Upgradeable.sol\";\nimport {ECDSA} from \"@openzeppelin/contracts/utils/cryptography/ECDSA.sol\";\nimport {EIP712Upgradeable} from \"../../../utils/cryptography/EIP712Upgradeable.sol\";\nimport {NoncesUpgradeable} from \"../../../utils/NoncesUpgradeable.sol\";\nimport {Initializable} from \"../../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\nabstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {\n    bytes32 private constant PERMIT_TYPEHASH =\n        keccak256(\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\");\n\n    /**\n     * @dev Permit deadline has expired.\n     */\n    error ERC2612ExpiredSignature(uint256 deadline);\n\n    /**\n     * @dev Mismatched signature.\n     */\n    error ERC2612InvalidSigner(address signer, address owner);\n\n    /**\n     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `\"1\"`.\n     *\n     * It's a good idea to use the same `name` that is defined as the ERC-20 token name.\n     */\n    function __ERC20Permit_init(string memory name) internal onlyInitializing {\n        __EIP712_init_unchained(name, \"1\");\n    }\n\n    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}\n\n    /**\n     * @inheritdoc IERC20Permit\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) public virtual {\n        if (block.timestamp > deadline) {\n            revert ERC2612ExpiredSignature(deadline);\n        }\n\n        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\n\n        bytes32 hash = _hashTypedDataV4(structHash);\n\n        address signer = ECDSA.recover(hash, v, r, s);\n        if (signer != owner) {\n            revert ERC2612InvalidSigner(signer, owner);\n        }\n\n        _approve(owner, spender, value);\n    }\n\n    /**\n     * @inheritdoc IERC20Permit\n     */\n    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {\n        return super.nonces(owner);\n    }\n\n    /**\n     * @inheritdoc IERC20Permit\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {\n        return _domainSeparatorV4();\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/draft-IERC6093.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/access/AccessControl.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (access/AccessControl.sol)\n\npragma solidity ^0.8.20;\n\nimport {IAccessControl} from \"./IAccessControl.sol\";\nimport {Context} from \"../utils/Context.sol\";\nimport {ERC165} from \"../utils/introspection/ERC165.sol\";\n\n/**\n * @dev Contract module that allows children to implement role-based access\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\n * members except through off-chain means by accessing the contract event logs. Some\n * applications may benefit from on-chain enumerability, for those cases see\n * {AccessControlEnumerable}.\n *\n * Roles are referred to by their `bytes32` identifier. These should be exposed\n * in the external API and be unique. The best way to achieve this is by\n * using `public constant` hash digests:\n *\n * ```solidity\n * bytes32 public constant MY_ROLE = keccak256(\"MY_ROLE\");\n * ```\n *\n * Roles can be used to represent a set of permissions. To restrict access to a\n * function call, use {hasRole}:\n *\n * ```solidity\n * function foo() public {\n *     require(hasRole(MY_ROLE, msg.sender));\n *     ...\n * }\n * ```\n *\n * Roles can be granted and revoked dynamically via the {grantRole} and\n * {revokeRole} functions. Each role has an associated admin role, and only\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\n *\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\n * that only accounts with this role will be able to grant or revoke other\n * roles. More complex role relationships can be created by using\n * {_setRoleAdmin}.\n *\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\n * grant and revoke this role. Extra precautions should be taken to secure\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\n * to enforce additional security measures for this role.\n */\nabstract contract AccessControl is Context, IAccessControl, ERC165 {\n    struct RoleData {\n        mapping(address account => bool) hasRole;\n        bytes32 adminRole;\n    }\n\n    mapping(bytes32 role => RoleData) private _roles;\n\n    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\n\n    /**\n     * @dev Modifier that checks that an account has a specific role. Reverts\n     * with an {AccessControlUnauthorizedAccount} error including the required role.\n     */\n    modifier onlyRole(bytes32 role) {\n        _checkRole(role);\n        _;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) public view virtual returns (bool) {\n        return _roles[role].hasRole[account];\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`\n     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.\n     */\n    function _checkRole(bytes32 role) internal view virtual {\n        _checkRole(role, _msgSender());\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`\n     * is missing `role`.\n     */\n    function _checkRole(bytes32 role, address account) internal view virtual {\n        if (!hasRole(role, account)) {\n            revert AccessControlUnauthorizedAccount(account, role);\n        }\n    }\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {\n        return _roles[role].adminRole;\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _grantRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _revokeRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been revoked `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) public virtual {\n        if (callerConfirmation != _msgSender()) {\n            revert AccessControlBadConfirmation();\n        }\n\n        _revokeRole(role, callerConfirmation);\n    }\n\n    /**\n     * @dev Sets `adminRole` as ``role``'s admin role.\n     *\n     * Emits a {RoleAdminChanged} event.\n     */\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\n        bytes32 previousAdminRole = getRoleAdmin(role);\n        _roles[role].adminRole = adminRole;\n        emit RoleAdminChanged(role, previousAdminRole, adminRole);\n    }\n\n    /**\n     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {\n        if (!hasRole(role, account)) {\n            _roles[role].hasRole[account] = true;\n            emit RoleGranted(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n\n    /**\n     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {\n        if (hasRole(role, account)) {\n            _roles[role].hasRole[account] = false;\n            emit RoleRevoked(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,\n * consider using {ReentrancyGuardTransient} instead.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant NOT_ENTERED = 1;\n    uint256 private constant ENTERED = 2;\n\n    uint256 private _status;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    constructor() {\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        if (_status == ENTERED) {\n            revert ReentrancyGuardReentrantCall();\n        }\n\n        // Any calls to nonReentrant after this point will fail\n        _status = ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == ENTERED;\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Strings.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/Strings.sol)\n\npragma solidity ^0.8.20;\n\nimport {Math} from \"./math/Math.sol\";\nimport {SafeCast} from \"./math/SafeCast.sol\";\nimport {SignedMath} from \"./math/SignedMath.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    using SafeCast for *;\n\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n    uint256 private constant SPECIAL_CHARS_LOOKUP =\n        (1 << 0x08) | // backspace\n            (1 << 0x09) | // tab\n            (1 << 0x0a) | // newline\n            (1 << 0x0c) | // form feed\n            (1 << 0x0d) | // carriage return\n            (1 << 0x22) | // double quote\n            (1 << 0x5c); // backslash\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev The string being parsed contains characters that are not in scope of the given base.\n     */\n    error StringsInvalidChar();\n\n    /**\n     * @dev The string being parsed is not a properly formatted address.\n     */\n    error StringsInvalidAddressFormat();\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            assembly (\"memory-safe\") {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                assembly (\"memory-safe\") {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal\n     * representation, according to EIP-55.\n     */\n    function toChecksumHexString(address addr) internal pure returns (string memory) {\n        bytes memory buffer = bytes(toHexString(addr));\n\n        // hash the hex part of buffer (skip length + 2 bytes, length 40)\n        uint256 hashValue;\n        assembly (\"memory-safe\") {\n            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))\n        }\n\n        for (uint256 i = 41; i > 1; --i) {\n            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)\n            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {\n                // case shift by xoring with 0x20\n                buffer[i] ^= 0x20;\n            }\n            hashValue >>= 4;\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input) internal pure returns (uint256) {\n        return parseUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        uint256 result = 0;\n        for (uint256 i = begin; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 9) return (false, 0);\n            result *= 10;\n            result += chr;\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `int256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input) internal pure returns (int256) {\n        return parseInt(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {\n        (bool success, int256 value) = tryParseInt(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if\n     * the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {\n        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    uint256 private constant ABS_MIN_INT256 = 2 ** 255;\n\n    /**\n     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character or if the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, int256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseIntUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseIntUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, int256 value) {\n        bytes memory buffer = bytes(input);\n\n        // Check presence of a negative sign.\n        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        bool positiveSign = sign == bytes1(\"+\");\n        bool negativeSign = sign == bytes1(\"-\");\n        uint256 offset = (positiveSign || negativeSign).toUint();\n\n        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);\n\n        if (absSuccess && absValue < ABS_MIN_INT256) {\n            return (true, negativeSign ? -int256(absValue) : int256(absValue));\n        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {\n            return (true, type(int256).min);\n        } else return (false, 0);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input) internal pure returns (uint256) {\n        return parseHexUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseHexUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an\n     * invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseHexUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseHexUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        // skip 0x prefix if present\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 offset = hasPrefix.toUint() * 2;\n\n        uint256 result = 0;\n        for (uint256 i = begin + offset; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 15) return (false, 0);\n            result *= 16;\n            unchecked {\n                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).\n                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.\n                result += chr;\n            }\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as an `address`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input) internal pure returns (address) {\n        return parseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {\n        (bool success, address value) = tryParseAddress(input, begin, end);\n        if (!success) revert StringsInvalidAddressFormat();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly\n     * formatted address. See {parseAddress-string} requirements.\n     */\n    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {\n        return tryParseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly\n     * formatted address. See {parseAddress-string-uint256-uint256} requirements.\n     */\n    function tryParseAddress(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, address value) {\n        if (end > bytes(input).length || begin > end) return (false, address(0));\n\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;\n\n        // check that input is the correct length\n        if (end - begin == expectedLength) {\n            // length guarantees that this does not overflow, and value is at most type(uint160).max\n            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);\n            return (s, address(uint160(v)));\n        } else {\n            return (false, address(0));\n        }\n    }\n\n    function _tryParseChr(bytes1 chr) private pure returns (uint8) {\n        uint8 value = uint8(chr);\n\n        // Try to parse `chr`:\n        // - Case 1: [0-9]\n        // - Case 2: [a-f]\n        // - Case 3: [A-F]\n        // - otherwise not supported\n        unchecked {\n            if (value > 47 && value < 58) value -= 48;\n            else if (value > 96 && value < 103) value -= 87;\n            else if (value > 64 && value < 71) value -= 55;\n            else return type(uint8).max;\n        }\n\n        return value;\n    }\n\n    /**\n     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.\n     *\n     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.\n     *\n     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of\n     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode\n     * characters that are not in this range, but other tooling may provide different results.\n     */\n    function escapeJSON(string memory input) internal pure returns (string memory) {\n        bytes memory buffer = bytes(input);\n        bytes memory output = new bytes(2 * buffer.length); // worst case scenario\n        uint256 outputLength = 0;\n\n        for (uint256 i; i < buffer.length; ++i) {\n            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));\n            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {\n                output[outputLength++] = \"\\\\\";\n                if (char == 0x08) output[outputLength++] = \"b\";\n                else if (char == 0x09) output[outputLength++] = \"t\";\n                else if (char == 0x0a) output[outputLength++] = \"n\";\n                else if (char == 0x0c) output[outputLength++] = \"f\";\n                else if (char == 0x0d) output[outputLength++] = \"r\";\n                else if (char == 0x5c) output[outputLength++] = \"\\\\\";\n                else if (char == 0x22) {\n                    // solhint-disable-next-line quotes\n                    output[outputLength++] = '\"';\n                }\n            } else {\n                output[outputLength++] = char;\n            }\n        }\n        // write the actual length and deallocate unused memory\n        assembly (\"memory-safe\") {\n            mstore(output, outputLength)\n            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))\n        }\n\n        return string(output);\n    }\n\n    /**\n     * @dev Reads a bytes32 from a bytes array without bounds checking.\n     *\n     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the\n     * assembly block as such would prevent some optimizations.\n     */\n    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {\n        // This is not memory safe in the general case, but all calls to this private function are within bounds.\n        assembly (\"memory-safe\") {\n            value := mload(add(buffer, add(0x20, offset)))\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/access/Ownable2StepUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.20;\n\nimport {OwnableUpgradeable} from \"./OwnableUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * This extension of the {Ownable} contract includes a two-step mechanism to transfer\n * ownership, where the new owner must call {acceptOwnership} in order to replace the\n * old one. This can help prevent common mistakes, such as transfers of ownership to\n * incorrect accounts, or to contracts that are unable to interact with the\n * permission system.\n *\n * The initial owner is specified at deployment time in the constructor for `Ownable`. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {\n    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable2Step\n    struct Ownable2StepStorage {\n        address _pendingOwner;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Ownable2Step\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant Ownable2StepStorageLocation = 0x237e158222e3e6968b72b9db0d8043aacf074ad9f650f0d1606b4d82ee432c00;\n\n    function _getOwnable2StepStorage() private pure returns (Ownable2StepStorage storage $) {\n        assembly {\n            $.slot := Ownable2StepStorageLocation\n        }\n    }\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    function __Ownable2Step_init() internal onlyInitializing {\n    }\n\n    function __Ownable2Step_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        Ownable2StepStorage storage $ = _getOwnable2StepStorage();\n        return $._pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     *\n     * Setting `newOwner` to the zero address is allowed; this can be used to cancel an initiated ownership transfer.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        Ownable2StepStorage storage $ = _getOwnable2StepStorage();\n        $._pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        Ownable2StepStorage storage $ = _getOwnable2StepStorage();\n        delete $._pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        if (pendingOwner() != sender) {\n            revert OwnableUnauthorizedAccount(sender);\n        }\n        _transferOwnership(sender);\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/access/OwnableUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable\n    struct OwnableStorage {\n        address _owner;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Ownable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;\n\n    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {\n        assembly {\n            $.slot := OwnableStorageLocation\n        }\n    }\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    function __Ownable_init(address initialOwner) internal onlyInitializing {\n        __Ownable_init_unchained(initialOwner);\n    }\n\n    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        OwnableStorage storage $ = _getOwnableStorage();\n        return $._owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        OwnableStorage storage $ = _getOwnableStorage();\n        address oldOwner = $._owner;\n        $._owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC165.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/math/Math.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\nimport {Panic} from \"../Panic.sol\";\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Return the 512-bit addition of two uint256.\n     *\n     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.\n     */\n    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        assembly (\"memory-safe\") {\n            low := add(a, b)\n            high := lt(low, a)\n        }\n    }\n\n    /**\n     * @dev Return the 512-bit multiplication of two uint256.\n     *\n     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.\n     */\n    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use\n        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n        // variables such that product = high * 2²⁵⁶ + low.\n        assembly (\"memory-safe\") {\n            let mm := mulmod(a, b, not(0))\n            low := mul(a, b)\n            high := sub(sub(mm, low), lt(mm, low))\n        }\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a + b;\n            success = c >= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a - b;\n            success = c <= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a * b;\n            assembly (\"memory-safe\") {\n                // Only true when the multiplication doesn't overflow\n                // (c / a == b) || (a == 0)\n                success := or(eq(div(c, a), b), iszero(a))\n            }\n            // equivalent to: success ? c : 0\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `DIV` opcode returns zero when the denominator is 0.\n                result := div(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `MOD` opcode returns zero when the denominator is 0.\n                result := mod(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryAdd(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.\n     */\n    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {\n        (, uint256 result) = trySub(a, b);\n        return result;\n    }\n\n    /**\n     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryMul(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * SafeCast.toUint(condition));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n\n        // The following calculation ensures accurate ceiling division without overflow.\n        // Since a is non-zero, (a - 1) / b will not overflow.\n        // The largest possible result occurs when (a - 1) / b is type(uint256).max,\n        // but the largest value we can obtain is type(uint256).max - 1, which happens\n        // when a = type(uint256).max and b = 1.\n        unchecked {\n            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);\n        }\n    }\n\n    /**\n     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     *\n     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (high == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return low / denominator;\n            }\n\n            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.\n            if (denominator <= high) {\n                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [high low].\n            uint256 remainder;\n            assembly (\"memory-safe\") {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                high := sub(high, gt(remainder, low))\n                low := sub(low, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly (\"memory-safe\") {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [high low] by twos.\n                low := div(low, twos)\n\n                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from high into low.\n            low |= high * twos;\n\n            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such\n            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶\n            inverse *= 2 - denominator * inverse; // inverse mod 2³²\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is\n            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high\n            // is no longer required.\n            result = low * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);\n    }\n\n    /**\n     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n            if (high >= 1 << n) {\n                Panic.panic(Panic.UNDER_OVERFLOW);\n            }\n            return (high << (256 - n)) | (low >> n);\n        }\n    }\n\n    /**\n     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {\n        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);\n    }\n\n    /**\n     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.\n     *\n     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.\n     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.\n     *\n     * If the input value is not inversible, 0 is returned.\n     *\n     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the\n     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.\n     */\n    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {\n        unchecked {\n            if (n == 0) return 0;\n\n            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)\n            // Used to compute integers x and y such that: ax + ny = gcd(a, n).\n            // When the gcd is 1, then the inverse of a modulo n exists and it's x.\n            // ax + ny = 1\n            // ax = 1 + (-y)n\n            // ax ≡ 1 (mod n) # x is the inverse of a modulo n\n\n            // If the remainder is 0 the gcd is n right away.\n            uint256 remainder = a % n;\n            uint256 gcd = n;\n\n            // Therefore the initial coefficients are:\n            // ax + ny = gcd(a, n) = n\n            // 0a + 1n = n\n            int256 x = 0;\n            int256 y = 1;\n\n            while (remainder != 0) {\n                uint256 quotient = gcd / remainder;\n\n                (gcd, remainder) = (\n                    // The old remainder is the next gcd to try.\n                    remainder,\n                    // Compute the next remainder.\n                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd\n                    // where gcd is at most n (capped to type(uint256).max)\n                    gcd - remainder * quotient\n                );\n\n                (x, y) = (\n                    // Increment the coefficient of a.\n                    y,\n                    // Decrement the coefficient of n.\n                    // Can overflow, but the result is casted to uint256 so that the\n                    // next value of y is \"wrapped around\" to a value between 0 and n - 1.\n                    x - y * int256(quotient)\n                );\n            }\n\n            if (gcd != 1) return 0; // No inverse exists.\n            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.\n        }\n    }\n\n    /**\n     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.\n     *\n     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is\n     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that\n     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.\n     *\n     * NOTE: this function does NOT check that `p` is a prime greater than `2`.\n     */\n    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {\n        unchecked {\n            return Math.modExp(a, p - 2, p);\n        }\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)\n     *\n     * Requirements:\n     * - modulus can't be zero\n     * - underlying staticcall to precompile must succeed\n     *\n     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make\n     * sure the chain you're using it on supports the precompiled contract for modular exponentiation\n     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,\n     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly\n     * interpreted as 0.\n     */\n    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {\n        (bool success, uint256 result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).\n     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying\n     * to operate modulo 0 or if the underlying precompile reverted.\n     *\n     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain\n     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in\n     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack\n     * of a revert, but the result may be incorrectly interpreted as 0.\n     */\n    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {\n        if (m == 0) return (false, 0);\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            // | Offset    | Content    | Content (Hex)                                                      |\n            // |-----------|------------|--------------------------------------------------------------------|\n            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x60:0x7f | value of b | 0x<.............................................................b> |\n            // | 0x80:0x9f | value of e | 0x<.............................................................e> |\n            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |\n            mstore(ptr, 0x20)\n            mstore(add(ptr, 0x20), 0x20)\n            mstore(add(ptr, 0x40), 0x20)\n            mstore(add(ptr, 0x60), b)\n            mstore(add(ptr, 0x80), e)\n            mstore(add(ptr, 0xa0), m)\n\n            // Given the result < m, it's guaranteed to fit in 32 bytes,\n            // so we can use the memory scratch space located at offset 0.\n            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)\n            result := mload(0x00)\n        }\n    }\n\n    /**\n     * @dev Variant of {modExp} that supports inputs of arbitrary length.\n     */\n    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {\n        (bool success, bytes memory result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.\n     */\n    function tryModExp(\n        bytes memory b,\n        bytes memory e,\n        bytes memory m\n    ) internal view returns (bool success, bytes memory result) {\n        if (_zeroBytes(m)) return (false, new bytes(0));\n\n        uint256 mLen = m.length;\n\n        // Encode call args in result and move the free memory pointer\n        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);\n\n        assembly (\"memory-safe\") {\n            let dataPtr := add(result, 0x20)\n            // Write result on top of args to avoid allocating extra memory.\n            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)\n            // Overwrite the length.\n            // result.length > returndatasize() is guaranteed because returndatasize() == m.length\n            mstore(result, mLen)\n            // Set the memory pointer after the returned data.\n            mstore(0x40, add(dataPtr, mLen))\n        }\n    }\n\n    /**\n     * @dev Returns whether the provided byte array is zero.\n     */\n    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {\n        for (uint256 i = 0; i < byteArray.length; ++i) {\n            if (byteArray[i] != 0) {\n                return false;\n            }\n        }\n        return true;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only\n     * using integer operations.\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        unchecked {\n            // Take care of easy edge cases when a == 0 or a == 1\n            if (a <= 1) {\n                return a;\n            }\n\n            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a\n            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between\n            // the current value as `ε_n = | x_n - sqrt(a) |`.\n            //\n            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root\n            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is\n            // bigger than any uint256.\n            //\n            // By noticing that\n            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`\n            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar\n            // to the msb function.\n            uint256 aa = a;\n            uint256 xn = 1;\n\n            if (aa >= (1 << 128)) {\n                aa >>= 128;\n                xn <<= 64;\n            }\n            if (aa >= (1 << 64)) {\n                aa >>= 64;\n                xn <<= 32;\n            }\n            if (aa >= (1 << 32)) {\n                aa >>= 32;\n                xn <<= 16;\n            }\n            if (aa >= (1 << 16)) {\n                aa >>= 16;\n                xn <<= 8;\n            }\n            if (aa >= (1 << 8)) {\n                aa >>= 8;\n                xn <<= 4;\n            }\n            if (aa >= (1 << 4)) {\n                aa >>= 4;\n                xn <<= 2;\n            }\n            if (aa >= (1 << 2)) {\n                xn <<= 1;\n            }\n\n            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).\n            //\n            // We can refine our estimation by noticing that the middle of that interval minimizes the error.\n            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).\n            // This is going to be our x_0 (and ε_0)\n            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)\n\n            // From here, Newton's method give us:\n            // x_{n+1} = (x_n + a / x_n) / 2\n            //\n            // One should note that:\n            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a\n            //              = ((x_n² + a) / (2 * x_n))² - a\n            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a\n            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)\n            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)\n            //              = (x_n² - a)² / (2 * x_n)²\n            //              = ((x_n² - a) / (2 * x_n))²\n            //              ≥ 0\n            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n\n            //\n            // This gives us the proof of quadratic convergence of the sequence:\n            // ε_{n+1} = | x_{n+1} - sqrt(a) |\n            //         = | (x_n + a / x_n) / 2 - sqrt(a) |\n            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |\n            //         = | (x_n - sqrt(a))² / (2 * x_n) |\n            //         = | ε_n² / (2 * x_n) |\n            //         = ε_n² / | (2 * x_n) |\n            //\n            // For the first iteration, we have a special case where x_0 is known:\n            // ε_1 = ε_0² / | (2 * x_0) |\n            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))\n            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))\n            //     ≤ 2**(e-3) / 3\n            //     ≤ 2**(e-3-log2(3))\n            //     ≤ 2**(e-4.5)\n            //\n            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:\n            // ε_{n+1} = ε_n² / | (2 * x_n) |\n            //         ≤ (2**(e-k))² / (2 * 2**(e-1))\n            //         ≤ 2**(2*e-2*k) / 2**e\n            //         ≤ 2**(e-2*k)\n            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above\n            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5\n            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9\n            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18\n            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36\n            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72\n\n            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision\n            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either\n            // sqrt(a) or sqrt(a) + 1.\n            return xn - SafeCast.toUint(xn > a / xn);\n        }\n    }\n\n    /**\n     * @dev Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // If upper 8 bits of 16-bit half set, add 8 to result\n        r |= SafeCast.toUint((x >> r) > 0xff) << 3;\n        // If upper 4 bits of 8-bit half set, add 4 to result\n        r |= SafeCast.toUint((x >> r) > 0xf) << 2;\n\n        // Shifts value right by the current result and use it as an index into this lookup table:\n        //\n        // | x (4 bits) |  index  | table[index] = MSB position |\n        // |------------|---------|-----------------------------|\n        // |    0000    |    0    |        table[0] = 0         |\n        // |    0001    |    1    |        table[1] = 0         |\n        // |    0010    |    2    |        table[2] = 1         |\n        // |    0011    |    3    |        table[3] = 1         |\n        // |    0100    |    4    |        table[4] = 2         |\n        // |    0101    |    5    |        table[5] = 2         |\n        // |    0110    |    6    |        table[6] = 2         |\n        // |    0111    |    7    |        table[7] = 2         |\n        // |    1000    |    8    |        table[8] = 3         |\n        // |    1001    |    9    |        table[9] = 3         |\n        // |    1010    |   10    |        table[10] = 3        |\n        // |    1011    |   11    |        table[11] = 3        |\n        // |    1100    |   12    |        table[12] = 3        |\n        // |    1101    |   13    |        table[13] = 3        |\n        // |    1110    |   14    |        table[14] = 3        |\n        // |    1111    |   15    |        table[15] = 3        |\n        //\n        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.\n        assembly (\"memory-safe\") {\n            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8\n        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Errors.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of common custom errors used in multiple contracts\n *\n * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.\n * It is recommended to avoid relying on the error API for critical functionality.\n *\n * _Available since v5.1._\n */\nlibrary Errors {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error InsufficientBalance(uint256 balance, uint256 needed);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedCall();\n\n    /**\n     * @dev The deployment failed.\n     */\n    error FailedDeployment();\n\n    /**\n     * @dev A necessary precompile is missing.\n     */\n    error MissingPrecompile(address);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/utils/ContextUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC1967.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1967.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.\n */\ninterface IERC1967 {\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n        if (!_callOptionalReturnBool(token, approvalCall)) {\n            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n            _callOptionalReturn(token, approvalCall);\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            // bubble errors\n            if iszero(success) {\n                let ptr := mload(0x40)\n                returndatacopy(ptr, 0, returndatasize())\n                revert(ptr, returndatasize())\n            }\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n\n        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.\n     */\n    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n        bool success;\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/math/SignedMath.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.20;\n\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // Formula from the \"Bit Twiddling Hacks\" by Sean Eron Anderson.\n            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,\n            // taking advantage of the most significant (or \"sign\" bit) in two's complement representation.\n            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,\n            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).\n            int256 mask = n >> 255;\n\n            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.\n            return uint256((n + mask) ^ mask);\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/access/IAccessControl.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (access/IAccessControl.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev External interface of AccessControl declared to support ERC-165 detection.\n */\ninterface IAccessControl {\n    /**\n     * @dev The `account` is missing a role.\n     */\n    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);\n\n    /**\n     * @dev The caller of a function is not the expected one.\n     *\n     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.\n     */\n    error AccessControlBadConfirmation();\n\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted to signal this.\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).\n     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) external;\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Panic.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Helper library for emitting standardized panic codes.\n *\n * ```solidity\n * contract Example {\n *      using Panic for uint256;\n *\n *      // Use any of the declared internal constants\n *      function foo() { Panic.GENERIC.panic(); }\n *\n *      // Alternatively\n *      function foo() { Panic.panic(Panic.GENERIC); }\n * }\n * ```\n *\n * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].\n *\n * _Available since v5.1._\n */\n// slither-disable-next-line unused-state\nlibrary Panic {\n    /// @dev generic / unspecified error\n    uint256 internal constant GENERIC = 0x00;\n    /// @dev used by the assert() builtin\n    uint256 internal constant ASSERT = 0x01;\n    /// @dev arithmetic underflow or overflow\n    uint256 internal constant UNDER_OVERFLOW = 0x11;\n    /// @dev division or modulo by zero\n    uint256 internal constant DIVISION_BY_ZERO = 0x12;\n    /// @dev enum conversion error\n    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;\n    /// @dev invalid encoding in storage\n    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;\n    /// @dev empty array pop\n    uint256 internal constant EMPTY_ARRAY_POP = 0x31;\n    /// @dev array out of bounds access\n    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;\n    /// @dev resource error (too large allocation or too large array)\n    uint256 internal constant RESOURCE_ERROR = 0x41;\n    /// @dev calling invalid internal function\n    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;\n\n    /// @dev Reverts with a panic code. Recommended to use with\n    /// the internal constants with predefined codes.\n    function panic(uint256 code) internal pure {\n        assembly (\"memory-safe\") {\n            mstore(0x00, 0x4e487b71)\n            mstore(0x20, code)\n            revert(0x1c, 0x24)\n        }\n    }\n}\n"},{"file_path":"contracts/interfaces/ITheoWhitelist.sol","source_code":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.28;\n\nimport {IAccessControl} from \"@openzeppelin/contracts/access/IAccessControl.sol\";\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\n\ninterface ITheoWhitelist is IAccessControl, IERC165 {\n    /// @notice Account whitelisted\n    event GrantWhitelist(address account);\n\n    /// @notice Account whitelist revoked\n    event RevokeWhitelist(address account);\n\n    /// @notice Account blacklisted\n    event GrantBlacklist(address account);\n\n    /// @notice Account blacklist revoked\n    event RevokeBlacklist(address account);\n\n    /**\n     * @dev Attempted to transfer tokens to an account that is not whitelisted.\n     */\n    error TheoWhitelistNotWhitelisted(address account);\n\n    /**\n     * @dev Attempted to transfer tokens to an account that is blacklisted.\n     */\n    error TheoWhitelistBlacklisted(address account);\n\n    /**\n     * @dev Attempted to renounce a role\n     */\n    error TheoWhitelistRenounceRoleNotAllowed();\n\n    /// @notice returns if an account is whitelisted\n    function isWhitelisted(address account) external view returns (bool);\n\n    /// @notice reverts if not whitelisted\n    function onlyWhitelisted(address account) external view;\n\n    /// @notice returns if an account is blacklisted\n    function isBlacklisted(address account) external view returns (bool);\n\n    /// @notice reverts if blacklisted\n    function onlyNotBlacklisted(address account) external view;\n\n    /// @notice sets address that can manage the whitelist/blacklist\n    function setWhitelistManager(address whitelistManager, bool status) external;\n\n    /// @notice callable by whitelist manager to whitelist a user\n    function grantWhitelist(address account) external;\n\n    /// @notice callable by whitelist manager to revoke a user's whitelist status\n    function revokeWhitelist(address account) external;\n\n    /// @notice callable by whitelist manager to blacklist a user\n    function grantBlacklist(address account) external;\n\n    /// @notice callable by whitelist manager to revoke a user's blacklist status\n    function revokeBlacklist(address account) external;\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/proxy/beacon/IBeacon.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {UpgradeableBeacon} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/math/SafeCast.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n    /**\n     * @dev Value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n    /**\n     * @dev An int value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedIntToUint(int256 value);\n\n    /**\n     * @dev Value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n    /**\n     * @dev An uint value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedUintToInt(uint256 value);\n\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        if (value > type(uint248).max) {\n            revert SafeCastOverflowedUintDowncast(248, value);\n        }\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        if (value > type(uint240).max) {\n            revert SafeCastOverflowedUintDowncast(240, value);\n        }\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        if (value > type(uint232).max) {\n            revert SafeCastOverflowedUintDowncast(232, value);\n        }\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        if (value > type(uint224).max) {\n            revert SafeCastOverflowedUintDowncast(224, value);\n        }\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        if (value > type(uint216).max) {\n            revert SafeCastOverflowedUintDowncast(216, value);\n        }\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        if (value > type(uint208).max) {\n            revert SafeCastOverflowedUintDowncast(208, value);\n        }\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        if (value > type(uint200).max) {\n            revert SafeCastOverflowedUintDowncast(200, value);\n        }\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        if (value > type(uint192).max) {\n            revert SafeCastOverflowedUintDowncast(192, value);\n        }\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        if (value > type(uint184).max) {\n            revert SafeCastOverflowedUintDowncast(184, value);\n        }\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        if (value > type(uint176).max) {\n            revert SafeCastOverflowedUintDowncast(176, value);\n        }\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        if (value > type(uint168).max) {\n            revert SafeCastOverflowedUintDowncast(168, value);\n        }\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        if (value > type(uint160).max) {\n            revert SafeCastOverflowedUintDowncast(160, value);\n        }\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        if (value > type(uint152).max) {\n            revert SafeCastOverflowedUintDowncast(152, value);\n        }\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        if (value > type(uint144).max) {\n            revert SafeCastOverflowedUintDowncast(144, value);\n        }\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        if (value > type(uint136).max) {\n            revert SafeCastOverflowedUintDowncast(136, value);\n        }\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        if (value > type(uint128).max) {\n            revert SafeCastOverflowedUintDowncast(128, value);\n        }\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        if (value > type(uint120).max) {\n            revert SafeCastOverflowedUintDowncast(120, value);\n        }\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        if (value > type(uint112).max) {\n            revert SafeCastOverflowedUintDowncast(112, value);\n        }\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        if (value > type(uint104).max) {\n            revert SafeCastOverflowedUintDowncast(104, value);\n        }\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        if (value > type(uint96).max) {\n            revert SafeCastOverflowedUintDowncast(96, value);\n        }\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        if (value > type(uint88).max) {\n            revert SafeCastOverflowedUintDowncast(88, value);\n        }\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        if (value > type(uint80).max) {\n            revert SafeCastOverflowedUintDowncast(80, value);\n        }\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        if (value > type(uint72).max) {\n            revert SafeCastOverflowedUintDowncast(72, value);\n        }\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        if (value > type(uint64).max) {\n            revert SafeCastOverflowedUintDowncast(64, value);\n        }\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        if (value > type(uint56).max) {\n            revert SafeCastOverflowedUintDowncast(56, value);\n        }\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        if (value > type(uint48).max) {\n            revert SafeCastOverflowedUintDowncast(48, value);\n        }\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        if (value > type(uint40).max) {\n            revert SafeCastOverflowedUintDowncast(40, value);\n        }\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        if (value > type(uint32).max) {\n            revert SafeCastOverflowedUintDowncast(32, value);\n        }\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        if (value > type(uint24).max) {\n            revert SafeCastOverflowedUintDowncast(24, value);\n        }\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        if (value > type(uint16).max) {\n            revert SafeCastOverflowedUintDowncast(16, value);\n        }\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        if (value > type(uint8).max) {\n            revert SafeCastOverflowedUintDowncast(8, value);\n        }\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        if (value < 0) {\n            revert SafeCastOverflowedIntToUint(value);\n        }\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(248, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(240, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(232, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(224, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(216, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(208, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(200, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(192, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(184, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(176, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(168, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(160, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(152, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(144, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(136, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(128, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(120, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(112, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(104, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(96, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(88, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(80, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(72, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(64, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(56, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(48, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(40, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(32, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(24, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(16, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(8, value);\n        }\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        if (value > uint256(type(int256).max)) {\n            revert SafeCastOverflowedUintToInt(value);\n        }\n        return int256(value);\n    }\n\n    /**\n     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.\n     */\n    function toUint(bool b) internal pure returns (uint256 u) {\n        assembly (\"memory-safe\") {\n            u := iszero(iszero(b))\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/introspection/IERC165.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/StorageSlot.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC-1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct Int256Slot {\n        int256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Int256Slot` with member `value` located at `slot`.\n     */\n    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Address.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.2.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\nimport {Errors} from \"./Errors.sol\";\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert Errors.InsufficientBalance(address(this).balance, amount);\n        }\n\n        (bool success, bytes memory returndata) = recipient.call{value: amount}(\"\");\n        if (!success) {\n            _revert(returndata);\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {Errors.FailedCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case\n     * of an unsuccessful call.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            // only check if target is a contract if the call was successful and the return data is empty\n            // otherwise we already know that it was a contract\n            if (returndata.length == 0 && target.code.length == 0) {\n                revert AddressEmptyCode(target);\n            }\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {Errors.FailedCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.\n     */\n    function _revert(bytes memory returndata) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            assembly (\"memory-safe\") {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/cryptography/EIP712.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/EIP712.sol)\n\npragma solidity ^0.8.20;\n\nimport {MessageHashUtils} from \"./MessageHashUtils.sol\";\nimport {ShortStrings, ShortString} from \"../ShortStrings.sol\";\nimport {IERC5267} from \"../../interfaces/IERC5267.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose\n * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract\n * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to\n * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain\n * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the\n * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.\n *\n * @custom:oz-upgrades-unsafe-allow state-variable-immutable\n */\nabstract contract EIP712 is IERC5267 {\n    using ShortStrings for *;\n\n    bytes32 private constant TYPE_HASH =\n        keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\");\n\n    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to\n    // invalidate the cached domain separator if the chain id changes.\n    bytes32 private immutable _cachedDomainSeparator;\n    uint256 private immutable _cachedChainId;\n    address private immutable _cachedThis;\n\n    bytes32 private immutable _hashedName;\n    bytes32 private immutable _hashedVersion;\n\n    ShortString private immutable _name;\n    ShortString private immutable _version;\n    // slither-disable-next-line constable-states\n    string private _nameFallback;\n    // slither-disable-next-line constable-states\n    string private _versionFallback;\n\n    /**\n     * @dev Initializes the domain separator and parameter caches.\n     *\n     * The meaning of `name` and `version` is specified in\n     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:\n     *\n     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n     * - `version`: the current major version of the signing domain.\n     *\n     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n     * contract upgrade].\n     */\n    constructor(string memory name, string memory version) {\n        _name = name.toShortStringWithFallback(_nameFallback);\n        _version = version.toShortStringWithFallback(_versionFallback);\n        _hashedName = keccak256(bytes(name));\n        _hashedVersion = keccak256(bytes(version));\n\n        _cachedChainId = block.chainid;\n        _cachedDomainSeparator = _buildDomainSeparator();\n        _cachedThis = address(this);\n    }\n\n    /**\n     * @dev Returns the domain separator for the current chain.\n     */\n    function _domainSeparatorV4() internal view returns (bytes32) {\n        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {\n            return _cachedDomainSeparator;\n        } else {\n            return _buildDomainSeparator();\n        }\n    }\n\n    function _buildDomainSeparator() private view returns (bytes32) {\n        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));\n    }\n\n    /**\n     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n     * function returns the hash of the fully encoded EIP712 message for this domain.\n     *\n     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n     *\n     * ```solidity\n     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n     *     keccak256(\"Mail(address to,string contents)\"),\n     *     mailTo,\n     *     keccak256(bytes(mailContents))\n     * )));\n     * address signer = ECDSA.recover(digest, signature);\n     * ```\n     */\n    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);\n    }\n\n    /**\n     * @inheritdoc IERC5267\n     */\n    function eip712Domain()\n        public\n        view\n        virtual\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        )\n    {\n        return (\n            hex\"0f\", // 01111\n            _EIP712Name(),\n            _EIP712Version(),\n            block.chainid,\n            address(this),\n            bytes32(0),\n            new uint256[](0)\n        );\n    }\n\n    /**\n     * @dev The name parameter for the EIP712 domain.\n     *\n     * NOTE: By default this function reads _name which is an immutable value.\n     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function _EIP712Name() internal view returns (string memory) {\n        return _name.toStringWithFallback(_nameFallback);\n    }\n\n    /**\n     * @dev The version parameter for the EIP712 domain.\n     *\n     * NOTE: By default this function reads _version which is an immutable value.\n     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function _EIP712Version() internal view returns (string memory) {\n        return _version.toStringWithFallback(_versionFallback);\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Pausable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (utils/Pausable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract Pausable is Context {\n    bool private _paused;\n\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    /**\n     * @dev The operation failed because the contract is paused.\n     */\n    error EnforcedPause();\n\n    /**\n     * @dev The operation failed because the contract is not paused.\n     */\n    error ExpectedPause();\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        return _paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        if (paused()) {\n            revert EnforcedPause();\n        }\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        if (!paused()) {\n            revert ExpectedPause();\n        }\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        _paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        _paused = false;\n        emit Unpaused(_msgSender());\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/proxy/utils/Initializable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Storage of the initializable contract.\n     *\n     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions\n     * when using with upgradeable contracts.\n     *\n     * @custom:storage-location erc7201:openzeppelin.storage.Initializable\n     */\n    struct InitializableStorage {\n        /**\n         * @dev Indicates that the contract has been initialized.\n         */\n        uint64 _initialized;\n        /**\n         * @dev Indicates that the contract is in the process of being initialized.\n         */\n        bool _initializing;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Initializable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;\n\n    /**\n     * @dev The contract is already initialized.\n     */\n    error InvalidInitialization();\n\n    /**\n     * @dev The contract is not initializing.\n     */\n    error NotInitializing();\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint64 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any\n     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in\n     * production.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        // Cache values to avoid duplicated sloads\n        bool isTopLevelCall = !$._initializing;\n        uint64 initialized = $._initialized;\n\n        // Allowed calls:\n        // - initialSetup: the contract is not in the initializing state and no previous version was\n        //                 initialized\n        // - construction: the contract is initialized at version 1 (no reinitialization) and the\n        //                 current contract is just being deployed\n        bool initialSetup = initialized == 0 && isTopLevelCall;\n        bool construction = initialized == 1 && address(this).code.length == 0;\n\n        if (!initialSetup && !construction) {\n            revert InvalidInitialization();\n        }\n        $._initialized = 1;\n        if (isTopLevelCall) {\n            $._initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            $._initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint64 version) {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing || $._initialized >= version) {\n            revert InvalidInitialization();\n        }\n        $._initialized = version;\n        $._initializing = true;\n        _;\n        $._initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        _checkInitializing();\n        _;\n    }\n\n    /**\n     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.\n     */\n    function _checkInitializing() internal view virtual {\n        if (!_isInitializing()) {\n            revert NotInitializing();\n        }\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing) {\n            revert InvalidInitialization();\n        }\n        if ($._initialized != type(uint64).max) {\n            $._initialized = type(uint64).max;\n            emit Initialized(type(uint64).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint64) {\n        return _getInitializableStorage()._initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _getInitializableStorage()._initializing;\n    }\n\n    /**\n     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.\n     *\n     * NOTE: Consider following the ERC-7201 formula to derive storage locations.\n     */\n    function _initializableStorageSlot() internal pure virtual returns (bytes32) {\n        return INITIALIZABLE_STORAGE;\n    }\n\n    /**\n     * @dev Returns a pointer to the storage namespace.\n     */\n    // solhint-disable-next-line var-name-mixedcase\n    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {\n        bytes32 slot = _initializableStorageSlot();\n        assembly {\n            $.slot := slot\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/utils/Context.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/contracts/utils/NoncesUpgradeable.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)\npragma solidity ^0.8.20;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides tracking nonces for addresses. Nonces will only increment.\n */\nabstract contract NoncesUpgradeable is Initializable {\n    /**\n     * @dev The nonce used for an `account` is not the expected current nonce.\n     */\n    error InvalidAccountNonce(address account, uint256 currentNonce);\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces\n    struct NoncesStorage {\n        mapping(address account => uint256) _nonces;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Nonces\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;\n\n    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {\n        assembly {\n            $.slot := NoncesStorageLocation\n        }\n    }\n\n    function __Nonces_init() internal onlyInitializing {\n    }\n\n    function __Nonces_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns the next unused nonce for an address.\n     */\n    function nonces(address owner) public view virtual returns (uint256) {\n        NoncesStorage storage $ = _getNoncesStorage();\n        return $._nonces[owner];\n    }\n\n    /**\n     * @dev Consumes a nonce.\n     *\n     * Returns the current value and increments nonce.\n     */\n    function _useNonce(address owner) internal virtual returns (uint256) {\n        NoncesStorage storage $ = _getNoncesStorage();\n        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be\n        // decremented or reset. This guarantees that the nonce never overflows.\n        unchecked {\n            // It is important to do x++ and not ++x here.\n            return $._nonces[owner]++;\n        }\n    }\n\n    /**\n     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.\n     */\n    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {\n        uint256 current = _useNonce(owner);\n        if (nonce != current) {\n            revert InvalidAccountNonce(owner, current);\n        }\n    }\n}\n"},{"file_path":"lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/interfaces/IERC5267.sol","source_code":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)\n\npragma solidity ^0.8.20;\n\ninterface IERC5267 {\n    /**\n     * @dev MAY be emitted to signal that the domain could have changed.\n     */\n    event EIP712DomainChanged();\n\n    /**\n     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712\n     * signature.\n     */\n    function eip712Domain()\n        external\n        view\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        );\n}\n"}],"certified":false,"conflicting_implementations":null,"abi":[{"inputs":[{"internalType":"address","name":"thusd_","type":"address"},{"internalType":"contract ITheoWhitelist","name":"whitelist_","type":"address"},{"internalType":"address","name":"admin_","type":"address"},{"internalType":"address","name":"mintDest_","type":"address"},{"internalType":"address","name":"redeemDest_","type":"address"},{"internalType":"uint256","name":"maxMintPerBlock_","type":"uint256"},{"internalType":"uint256","name":"maxRedeemPerBlock_","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"FeeTooHigh","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidAssetAddress","type":"error"},{"inputs":[],"name":"InvalidAssetRatio","type":"error"},{"inputs":[],"name":"InvalidBackingAddress","type":"error"},{"inputs":[],"name":"InvalidOrder","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[],"name":"InvalidSignature","type":"error"},{"inputs":[],"name":"InvalidZeroAddress","type":"error"},{"inputs":[],"name":"MaxMintPerBlockExceeded","type":"error"},{"inputs":[],"name":"MaxRedeemPerBlockExceeded","type":"error"},{"inputs":[],"name":"OrderAlreadyUsed","type":"error"},{"inputs":[],"name":"OrderExpired","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"SignerIsDestination","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"inputs":[],"name":"UnsupportedAsset","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"}],"name":"AssetAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"}],"name":"AssetRemoved","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldMax","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newMax","type":"uint256"}],"name":"MaxMintPerBlockChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldMax","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newMax","type":"uint256"}],"name":"MaxRedeemPerBlockChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"signer","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"address","name":"collateralAsset","type":"address"},{"indexed":false,"internalType":"uint256","name":"collateralAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"thusdAmount","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldDestination","type":"address"},{"indexed":true,"internalType":"address","name":"newDestination","type":"address"}],"name":"MintDestinationChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"signer","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"address","name":"collateralAsset","type":"address"},{"indexed":false,"internalType":"uint256","name":"thusdAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"collateralTransferred","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"fee","type":"uint256"}],"name":"Redeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldDestination","type":"address"},{"indexed":true,"internalType":"address","name":"newDestination","type":"address"}],"name":"RedeemDestinationChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldFeeBps","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newFeeBps","type":"uint256"}],"name":"RedeemFeeChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"EMERGENCY_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINIMUM_MINT_AMOUNT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"}],"name":"addSupportedAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"enum IThUSDMinter.OrderType","name":"order_type","type":"uint8"},{"internalType":"uint256","name":"expiry","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"address","name":"collateral_asset","type":"address"},{"internalType":"uint256","name":"collateral_amount","type":"uint256"},{"internalType":"uint256","name":"thusd_amount","type":"uint256"}],"internalType":"struct IThUSDMinter.Order","name":"order","type":"tuple"}],"name":"hashOrder","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"}],"name":"isSupportedAsset","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxMintPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxRedeemPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"enum IThUSDMinter.OrderType","name":"order_type","type":"uint8"},{"internalType":"uint256","name":"expiry","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"address","name":"collateral_asset","type":"address"},{"internalType":"uint256","name":"collateral_amount","type":"uint256"},{"internalType":"uint256","name":"thusd_amount","type":"uint256"}],"internalType":"struct IThUSDMinter.Order","name":"order","type":"tuple"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"mintDestination","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"mintedPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"enum IThUSDMinter.OrderType","name":"order_type","type":"uint8"},{"internalType":"uint256","name":"expiry","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"address","name":"collateral_asset","type":"address"},{"internalType":"uint256","name":"collateral_amount","type":"uint256"},{"internalType":"uint256","name":"thusd_amount","type":"uint256"}],"internalType":"struct IThUSDMinter.Order","name":"order","type":"tuple"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"redeem","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"redeemDestination","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"redeemFeeBps","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"redeemedPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"}],"name":"removeSupportedAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newMax","type":"uint256"}],"name":"setMaxMintPerBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newMax","type":"uint256"}],"name":"setMaxRedeemPerBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newMintDestination","type":"address"}],"name":"setMintDestination","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newRedeemDestination","type":"address"}],"name":"setRedeemDestination","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newFeeBps","type":"uint256"}],"name":"setRedeemFeeBps","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"supportedAssets","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"thusd","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"usedOrderHashes","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"whitelist","outputs":[{"internalType":"contract ITheoWhitelist","name":"","type":"address"}],"stateMutability":"view","type":"function"}],"is_changed_bytecode":false,"is_partially_verified":false,"constructor_args":"0x000000000000000000000000a3fe5c7596024e6811e14f029937d5bd8ae485b300000000000000000000000014d38a3ed85ebddb3e22ff022e38e645a311f3880000000000000000000000003d5c293e04a584a5d3f9ad5698784f1d77a76f33000000000000000000000000ec417ccb6dd26868cca993a92f37217b1d4b3c2f000000000000000000000000ec417ccb6dd26868cca993a92f37217b1d4b3c2f000000000000000000000000000000000000000000000000000000e8d4a510000000000000000000000000000000000000000000000000000000002e90edd000"}